How to get from Armadale to Hillside (Melton) by bus and train?
By bus and train
To get from Armadale to Hillside (Melton) in Melbourne, you’ll need to take 2 train lines and one bus line: take the FRANKSTON train from Armadale station to Flinders Street station. Next, you’ll have to switch to the SUNBURY train and finally take the 463 bus from Watergardens Station/Watergardens Circuit Rd (Taylors Lakes) station to Sunningdale Dr/Sanctuary Rd (Hillside) station. The total trip duration for this route is approximately 1 hr 20 min. The ride fare is A$5.30.
Step by Step
- 1Start from train stationArmadale
- 2Wait for trainFRANKSTONCity (Flinders Street)
- 3Ride to train stationFlinders Street13 min
- 4Wait for trainSUNBURYSunbury
- 5Ride to train stationWatergardens36 min
- 6Walk to bus stationWatergardens Station/Watergardens Circuit Rd (Taylors Lakes)ID 2327840 m • 1 min
- 7Wait for bus463Hillside
- 8Ride to bus stationSunningdale Dr/Sanctuary Rd (Hillside)ID 4675914 min
- 9Walk toHillside (Melton)210 m • 3 min
Alternative route by bus and train via FRANKSTON, SUNBURY and 460
To get from Armadale to Hillside (Melton) in Melbourne, you’ll need to take 2 train lines and one bus line: take the FRANKSTON train from Armadale station to Flinders Street station. Next, you’ll have to switch to the SUNBURY train and finally take the 460 bus from Watergardens Station/Watergardens Circuit Rd (Taylors Lakes) station to Panorama Dr/Melton Hwy (Hillside) station. The total trip duration for this route is approximately 1 hr 24 min. The ride fare is A$5.30.
Step by Step
- 1Start from train stationArmadale
- 2Wait for trainFRANKSTONCity (Flinders Street)
- 3Ride to train stationFlinders Street13 min
- 4Wait for trainSUNBURYSunbury
- 5Ride to train stationWatergardens36 min
- 6Walk to bus stationWatergardens Station/Watergardens Circuit Rd (Taylors Lakes)ID 4764480 m • 2 min
- 7Wait for bus460Caroline Springs Station
- 8Ride to bus stationPanorama Dr/Melton Hwy (Hillside)ID 99194 min
- 9Walk toHillside (Melton)1.3 km • 17 min
Public transport directions from Armadale to Hillside (Melton)
Public transport stations close to Armadale
Armadale is located at Armadale, Melbourne and the nearest public transport station is Armadale.
Train stations close to Armadale:
- Armadale
Bus stations close to Armadale:
- Armadale Station/Kooyong Rd (Armadale)
- High St/Kooyong Rd (Armadale)
- Dandenong Rd/Kooyong Rd (Armadale)
Public transport stations close to Hillside (Melton), Melbourne
Hillside (Melton) is located at Hillside (Melton), Melbourne and the nearest public transport station is Bellevue Bvd/Wattle Valley Dr (Hillside).
Train stations close to Hillside (Melton):
- Watergardens
Bus stations close to Hillside (Melton):
- Bellevue Bvd/Wattle Valley Dr (Hillside)
- James Ct/Wattle Valley Dr (Hillside)
- Pilgrim Dr/Wattle Valley Dr (Hillside)
Related Routes
- Abbotsford to Hillside (Melton)
- Aberfeldie to Hillside (Melton)
- Airport West to Hillside (Melton)
- Albanvale to Hillside (Melton)
- Albert Park to Hillside (Melton)
- Albion to Hillside (Melton)
- Alphington to Hillside (Melton)
- Altona to Hillside (Melton)
- Altona Meadows to Hillside (Melton)
- Altona North to Hillside (Melton)
- Ardeer to Hillside (Melton)
- Ascot Vale to Hillside (Melton)
- Ashburton to Hillside (Melton)
- Ashwood to Hillside (Melton)
- Aspendale to Hillside (Melton)
- Aspendale Gardens to Hillside (Melton)
- Attwood to Hillside (Melton)
- Avondale Heights to Hillside (Melton)
- Balaclava to Hillside (Melton)
- Balwyn to Hillside (Melton)
Alternative route by bus and train via FRANKSTON, SUNBURY and 460
To get from Armadale to Hillside (Melton) in Melbourne, you’ll need to take 2 train lines and one bus line: take the FRANKSTON train from Armadale station to Flinders Street station. Next, you’ll have to switch to the SUNBURY train and finally take the 460 bus from Watergardens Station/Watergardens Circuit Rd (Taylors Lakes) station to Panorama Dr/Melton Hwy (Hillside) station. The total trip duration for this route is approximately 1 hr 24 min. The ride fare is A$5.30.
Step by Step
- 1Start from train stationArmadale
- 2Wait for trainFRANKSTONCity (Flinders Street)
- 3Ride to train stationFlinders Street13 min
- 4Wait for trainSUNBURYSunbury
- 5Ride to train stationWatergardens36 min
- 6Walk to bus stationWatergardens Station/Watergardens Circuit Rd (Taylors Lakes)ID 4764480 m • 2 min
- 7Wait for bus460Caroline Springs Station
- 8Ride to bus stationPanorama Dr/Melton Hwy (Hillside)ID 99194 min
- 9Walk toHillside (Melton)1.3 km • 17 min
Questions & Answers
What is the fastest way to get from Armadale to Hillside (Melton)?
The fastest way takes 80 minutes, using Bus line FRANKSTON, Bus line SUNBURY, Bus line 463.
What is the alternative route to get from Armadale to Hillside (Melton)?
The alternative route takes 84 minutes, using Bus line FRANKSTON, Bus line SUNBURY, Bus line 460.
Is there a direct train between Armadale and Hillside (Melton) in Melbourne?
No, you’ll have to take 2 train lines and one bus line in total. The total travelling time is 1 hr 20 min.
Which train line goes from Armadale to Hillside (Melton) in Melbourne?
The FRANKSTON train line goes from City (Flinders Street) station near Armadale to Flinders Street station. From there you’ll have to take one train line and one bus line till Hillside (Melton) station near Hillside (Melton) in Melbourne
How long does it take to travel from Armadale to Hillside (Melton) in Melbourne by train and bus?
The total travel time between Armadale and Hillside (Melton) in Melbourne by train and bus is about 1 hr 20 min.
Where do I get on the train near Armadale to get to Hillside (Melton) in Melbourne?
Get on the FRANKSTON train from the City (Flinders Street) station near Armadale in Melbourne.
Where do I get off the train when travelling between Armadale and Hillside (Melton) in Melbourne?
Get off the train at the Hillside (Melton) stop, which is closest to Hillside (Melton) in Melbourne.
How much is the total train and bus fare from Armadale to Hillside (Melton)?
The ride from Armadale to Hillside (Melton) costs A$5.30.