How to get from Clarkson Stn to Bennett Springs by bus and train?

From Clarkson Stn to Bennett Springs by bus and train

To get from Clarkson Stn to Bennett Springs in Beechboro, you’ll need to take one train line and 2 bus lines: take the YANCHEP LINE train from Clarkson Stn station to Whitfords Stn station. Next, you’ll have to switch to the 355 bus and finally take the 955 bus from Henley Brook Bus Stn station to Altone Rd After Driftwood Wy station. The total trip duration for this route is approximately 1 hr 15 min. The ride fare is A$4.59.

75minA$4.59
Train - YANCHEP LINEYANCHEP LINE
Bus - 355355
Bus - 955955
Walk to Bennett Springs
Leaves from Clarkson Stn

Step by Step

  • 1
    Start from train station
    Start from train station
    Clarkson Stn
  • 2
    Train - YANCHEP LINEYANCHEP LINE
    Wait for train
    YANCHEP LINE
    Elizabeth Quay Stn
  • 3
    Ride to train station
    Ride to train station
    Whitfords Stn
    ID 102
    14 min
  • 4
    Bus - 355355
    Wait for bus
    355
    Ellenbrook
  • 5
    Ride to bus station
    Ride to bus station
    Henley Brook Bus Stn
    ID 143
    30 min
  • 6
    Walk to bus station
    Walk to bus station
    Henley Brook Bus Stn
    ID 143
    80 m • 2 min
  • 7
    Bus - 955955
    Wait for bus
    955
    Morley Bus Stn
  • 8
    Ride to bus station
    Ride to bus station
    Altone Rd After Driftwood Wy
    ID 15655
    13 min
  • 9
    Walk to Bennett Springs
    Walk to
    Bennett Springs
    Yarrow Drive
    330 m • 5 min
*Duration based on 8am traffic

Alternative route from Clarkson Stn to Bennett Springs by bus and train via YANCHEP LINE, MIDLAND LINE and 955

To get from Clarkson Stn to Bennett Springs in Beechboro, you’ll need to take 2 train lines and one bus line: take the YANCHEP LINE train from Clarkson Stn station to Perth Underground Stn station. Next, you’ll have to switch to the MIDLAND LINE train and finally take the 955 bus from Bassendean Stn station to Altone Rd After Tattler Wy station. The total trip duration for this route is approximately 1 hr 24 min. The ride fare is A$4.59.

84minA$4.59
Train - YANCHEP LINEYANCHEP LINE
Train - MIDLAND LINEMIDLAND LINE
Bus - 955955
Walk to Bennett Springs
Leaves from Clarkson Stn

Step by Step

  • 1
    Start from train station
    Start from train station
    Clarkson Stn
  • 2
    Train - YANCHEP LINEYANCHEP LINE
    Wait for train
    YANCHEP LINE
    Elizabeth Quay Stn
  • 3
    Ride to train station
    Ride to train station
    Perth Underground Stn
    ID 64
    35 min
  • 4
    Walk to train station
    Walk to train station
    Perth Stn
    ID 56
    10 m • 1 min
  • 5
    Train - MIDLAND LINEMIDLAND LINE
    Wait for train
    MIDLAND LINE
    Midland Stn
  • 6
    Ride to train station
    Ride to train station
    Bassendean Stn
    ID 39
    16 min
  • 7
    Bus - 955955
    Wait for bus
    955
    Ellenbrook
  • 8
    Ride to bus station
    Ride to bus station
    Altone Rd After Tattler Wy
    ID 15669
    10 min
  • 9
    Walk to Bennett Springs
    Walk to
    Bennett Springs
    Yarrow Drive
    320 m • 5 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Perth.
All local mobility options in one app

Public transport directions from Clarkson Stn to Bennett Springs

The distance between Clarkson Stn, Beechboro and Bennett Springs, Beechboro is approximately 43.75 km, which can typically be travelled in 75 min. Moovit will show you the directions from Clarkson Stn to Bennett Springs by bus and train, so no matter how you choose to travel in Beechboro – you will always have plenty of easy options.

Public transport stations close to Clarkson Stn

Clarkson Stn is located at Clarkson Stn, Beechboro and the nearest public transport station is Ocean Keys Bvd After Sidcup L.

Bus stations close to Clarkson Stn:

  • Ocean Keys Bvd After Sidcup L
  • Ocean Keys Bvd After Verrado Wy
  • Connolly Dr Before Ocean Keys Bvd

Public transport stations close to Bennett Springs, Beechboro

Bennett Springs is located at Yarrow Drive, Beechboro and the nearest public transport station is Bennett Springs Dr After Portland Mews.

Train stations close to Bennett Springs:

  • Success Hill Stn

Bus stations close to Bennett Springs:

  • Bennett Springs Dr After Portland Mews
  • Bennett Springs Dr After Waterway Pass
  • Bennett Springs Dr After Albatross Loop

Related Routes

Alternative route from Clarkson Stn to Bennett Springs by bus and train via YANCHEP LINE, MIDLAND LINE and 955

To get from Clarkson Stn to Bennett Springs in Beechboro, you’ll need to take 2 train lines and one bus line: take the YANCHEP LINE train from Clarkson Stn station to Perth Underground Stn station. Next, you’ll have to switch to the MIDLAND LINE train and finally take the 955 bus from Bassendean Stn station to Altone Rd After Tattler Wy station. The total trip duration for this route is approximately 1 hr 24 min. The ride fare is A$4.59.

84minA$4.59
Train - YANCHEP LINEYANCHEP LINE
Train - MIDLAND LINEMIDLAND LINE
Bus - 955955
Walk to Bennett Springs
Leaves from Clarkson Stn

Step by Step

  • 1
    Start from train station
    Start from train station
    Clarkson Stn
  • 2
    Train - YANCHEP LINEYANCHEP LINE
    Wait for train
    YANCHEP LINE
    Elizabeth Quay Stn
  • 3
    Ride to train station
    Ride to train station
    Perth Underground Stn
    ID 64
    35 min
  • 4
    Walk to train station
    Walk to train station
    Perth Stn
    ID 56
    10 m • 1 min
  • 5
    Train - MIDLAND LINEMIDLAND LINE
    Wait for train
    MIDLAND LINE
    Midland Stn
  • 6
    Ride to train station
    Ride to train station
    Bassendean Stn
    ID 39
    16 min
  • 7
    Bus - 955955
    Wait for bus
    955
    Ellenbrook
  • 8
    Ride to bus station
    Ride to bus station
    Altone Rd After Tattler Wy
    ID 15669
    10 min
  • 9
    Walk to Bennett Springs
    Walk to
    Bennett Springs
    Yarrow Drive
    320 m • 5 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Clarkson Stn to Bennett Springs?

    The fastest way takes 75 minutes, using Bus line YANCHEP LINE, Bus line 355, Bus line 955.

  • What is the alternative route to get from Clarkson Stn to Bennett Springs?

    The alternative route takes 84 minutes, using Bus line YANCHEP LINE, Bus line MIDLAND LINE, Bus line 955.

  • Is there a direct train between Clarkson Stn and Bennett Springs?

    No, you’ll have to take one train line and 2 bus lines in total. The total travelling time is 1 hr 15 min.

  • Which train line goes from Clarkson Stn to Bennett Springs?

    The YANCHEP LINE train line goes from Elizabeth Quay Stn station near Clarkson Stn in Clarkson to Whitfords Stn station. From there you’ll have to take 2 bus lines till Whitfords Stn station near Bennett Springs in Beechboro.

  • How long does it take to travel from Clarkson Stn to Bennett Springs by train and bus?

    The total travel time between Clarkson Stn in Clarkson and Bennett Springs in Beechboro by train and bus is about 1 hr 15 min.

  • Where do I get on the train near Clarkson Stn to get to Bennett Springs?

    Get on the YANCHEP LINE train from the Elizabeth Quay Stn station near Clarkson Stn in Clarkson.

  • Where do I get off the train when travelling between Clarkson Stn and Bennett Springs?

    Get off the train at the Whitfords Stn stop, which is closest to Bennett Springs in Beechboro.

  • How much is the train fare from Clarkson Stn to Bennett Springs?

    The ride from Clarkson Stn to Bennett Springs costs A$4.59.

Live arrivals, timetables, maps