• Australia
  • Perth
  • Queen Victoria St - Fremantle Traffic Bridge - Bennett Springs

How to get from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs by bus and train?

From Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs by bus and train

To get from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs in Beechboro, you’ll need to take 2 train lines and one bus line: take the FREMANTLE LINE train from Fremantle Stn station to Perth Stn station. Next, you’ll have to switch to the MIDLAND LINE train and finally take the 355 bus from Bassendean Stn station to Altone Rd After Tattler Wy station. The total trip duration for this route is approximately 1 hr 26 min. The ride fare is A$4.59. The bus and train schedule from Queen Victoria St - Fremantle Traffic Bridge may change. We recommend you check the updated bus and train schedule to Bennett Springs on the Moovit app.

86minA$4.59
Walk to train station
Train - FREMANTLE LINEFREMANTLE LINE
Train - MIDLAND LINEMIDLAND LINE
Bus - 355355
Walk to Bennett Springs
Leaves from Fremantle Stn

Step by Step

  • 1
    Walk to train station
    Walk to train station
    Fremantle Stn
    ID 87
    1.25 km • 17 min
  • 2
    Train - FREMANTLE LINEFREMANTLE LINE
    Wait for train
    FREMANTLE LINE
    Perth Stn
  • 3
    Ride to train station
    Ride to train station
    Perth Stn
    ID 56
    30 min
  • 4
    Train - MIDLAND LINEMIDLAND LINE
    Wait for train
    MIDLAND LINE
    Midland Stn
  • 5
    Ride to train station
    Ride to train station
    Bassendean Stn
    ID 39
    16 min
  • 6
    Bus - 355355
    Wait for bus
    355
    Whiteman Park Stn
  • 7
    Ride to bus station
    Ride to bus station
    Altone Rd After Tattler Wy
    ID 15669
    9 min
  • 8
    Walk to Bennett Springs
    Walk to
    Bennett Springs
    Yarrow Drive
    310 m • 4 min
*Duration based on 8am traffic

Alternative route from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs by bus and train via 910, MIDLAND LINE and 356

To get from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs in Beechboro, you’ll need to take 2 bus lines and one train line: take the 910 bus from Queen Victoria St - Fremantle Traffic Bridge station to St Georges Tce Before Howard St Westbound station. Next, you’ll have to switch to the MIDLAND LINE train and finally take the 356 bus from Bassendean Stn station to Bennett Springs Dr After Albatross Loop station. The total trip duration for this route is approximately 1 hr 48 min. The ride fare is A$4.59. The bus and train schedule from Queen Victoria St - Fremantle Traffic Bridge may change. We recommend you check the updated bus and train schedule to Bennett Springs on the Moovit app.

108minA$4.59
Walk to bus station
Bus - 910910
Train - MIDLAND LINEMIDLAND LINE
Bus - 356356
Walk to Bennett Springs
Leaves from Queen Victoria St - Fremantle Traffic Bridge

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Queen Victoria St - Fremantle Traffic Bridge
    200 m • 3 min
  • 2
    Bus - 910910
    Wait for bus
    910
    Perth Busport
  • 3
    Ride to bus station
    Ride to bus station
    St Georges Tce Before Howard St Westbound
    ID 112
    46 min
  • 4
    Walk to train station
    Walk to train station
    Perth Stn
    ID 56
    480 m • 7 min
  • 5
    Train - MIDLAND LINEMIDLAND LINE
    Wait for train
    MIDLAND LINE
    Midland Stn
  • 6
    Ride to train station
    Ride to train station
    Bassendean Stn
    ID 39
    16 min
  • 7
    Bus - 356356
    Wait for bus
    356
    Ballajura Stn
  • 8
    Ride to bus station
    Ride to bus station
    Bennett Springs Dr After Albatross Loop
    ID 15670
    19 min
  • 9
    Walk to Bennett Springs
    Walk to
    Bennett Springs
    Yarrow Drive
    90 m • 2 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Perth.
All local mobility options in one app

Public transport directions from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs

The distance between Queen Victoria St - Fremantle Traffic Bridge, Beechboro and Bennett Springs, Beechboro is approximately 36.86 km, which can typically be travelled in 86 min. Moovit will show you the directions from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs by bus and train, so no matter how you choose to travel in Beechboro – you will always have plenty of easy options.

Bus And Train schedule from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs

To check the bus and train schedule from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Queen Victoria St - Fremantle Traffic Bridge) and destination (Bennett Springs), then select the desired date and time of travel. Moovit will show all available bus and train routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and train, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and train schedules.

Related Routes

Alternative route from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs by bus and train via 910, MIDLAND LINE and 356

To get from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs in Beechboro, you’ll need to take 2 bus lines and one train line: take the 910 bus from Queen Victoria St - Fremantle Traffic Bridge station to St Georges Tce Before Howard St Westbound station. Next, you’ll have to switch to the MIDLAND LINE train and finally take the 356 bus from Bassendean Stn station to Bennett Springs Dr After Albatross Loop station. The total trip duration for this route is approximately 1 hr 48 min. The ride fare is A$4.59. The bus and train schedule from Queen Victoria St - Fremantle Traffic Bridge may change. We recommend you check the updated bus and train schedule to Bennett Springs on the Moovit app.

108minA$4.59
Walk to bus station
Bus - 910910
Train - MIDLAND LINEMIDLAND LINE
Bus - 356356
Walk to Bennett Springs
Leaves from Queen Victoria St - Fremantle Traffic Bridge

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Queen Victoria St - Fremantle Traffic Bridge
    200 m • 3 min
  • 2
    Bus - 910910
    Wait for bus
    910
    Perth Busport
  • 3
    Ride to bus station
    Ride to bus station
    St Georges Tce Before Howard St Westbound
    ID 112
    46 min
  • 4
    Walk to train station
    Walk to train station
    Perth Stn
    ID 56
    480 m • 7 min
  • 5
    Train - MIDLAND LINEMIDLAND LINE
    Wait for train
    MIDLAND LINE
    Midland Stn
  • 6
    Ride to train station
    Ride to train station
    Bassendean Stn
    ID 39
    16 min
  • 7
    Bus - 356356
    Wait for bus
    356
    Ballajura Stn
  • 8
    Ride to bus station
    Ride to bus station
    Bennett Springs Dr After Albatross Loop
    ID 15670
    19 min
  • 9
    Walk to Bennett Springs
    Walk to
    Bennett Springs
    Yarrow Drive
    90 m • 2 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs?

    The fastest way takes 86 minutes, using Train line FREMANTLE LINE, Train line MIDLAND LINE, Bus line 355.

  • What is the alternative route to get from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs?

    The alternative route takes 108 minutes, using Bus line 910, Train line MIDLAND LINE, Bus line 356.

  • Is there a direct train between Queen Victoria St - Fremantle Traffic Bridge and Bennett Springs?

    No, you’ll have to take 2 train lines and one bus line in total. The total travelling time is 1 hr 26 min.

  • Which train line goes from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs?

    The FREMANTLE LINE train line goes from Fremantle Stn station near Queen Victoria St - Fremantle Traffic Bridge in Fremantle to Perth Stn station. From there you’ll have to take one train line and one bus line till Perth Stn station near Bennett Springs in Beechboro.

  • How long does it take to travel from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs by train and bus?

    The total travel time between Queen Victoria St - Fremantle Traffic Bridge in Fremantle and Bennett Springs in Beechboro by train and bus is about 1 hr 26 min.

  • Where do I get on the train near Queen Victoria St - Fremantle Traffic Bridge to get to Bennett Springs?

    Get on the FREMANTLE LINE train from the Fremantle Stn station near Queen Victoria St - Fremantle Traffic Bridge in Fremantle.

  • Where do I get off the train when travelling between Queen Victoria St - Fremantle Traffic Bridge and Bennett Springs?

    Get off the train at the Perth Stn stop, which is closest to Bennett Springs in Beechboro.

  • How much is the total train and bus fare from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs?

    The ride from Queen Victoria St - Fremantle Traffic Bridge to Bennett Springs costs A$4.59.

Popular Routes