How to get from Paul Coe Cr After Noongale Cct to Bruce by bus and light rail?

From Paul Coe Cr After Noongale Cct to Bruce by bus and light rail

To get from Paul Coe Cr After Noongale Cct to Bruce in Canberra, you’ll need to take 2 bus lines and one light rail line: take the 27 bus from Mirrabei Dr Before Shoalhaven Av station to Gungahlin Place Plt 3 Arrivals station. Next, you’ll have to switch to the 1 light rail and finally take the 9 bus from Northbourne Av Opp Dickson Interchange station to Watkin St After Battye St station. The total trip duration for this route is approximately 1 hr 2 min. The bus and light rail schedule from Paul Coe Cr After Noongale Cct may change. We recommend you check the updated bus and light rail schedule to Bruce on the Moovit app.

62min
Walk to bus station
Bus - 2727
Light rail - 11
Bus - 99
Walk to Bruce
Leaves from Mirrabei Dr Before Shoalhaven Av

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Mirrabei Dr Before Shoalhaven Av
    ID 4712
    360 m • 5 min
  • 2
    Bus - 2727
    Wait for bus
    27
    Gungahlin
  • 3
    Ride to bus station
    Ride to bus station
    Gungahlin Place Plt 3 Arrivals
    ID 1801
    5 min
  • 4
    Walk to light rail station
    Walk to light rail station
    Gungahlin Place
    100 m • 2 min
  • 5
    Light rail - 11
    Wait for light rail
    1
    Alinga St
  • 6
    Ride to light rail station
    Ride to light rail station
    Dickson Interchange
    18 min
  • 7
    Walk to bus station
    Walk to bus station
    Northbourne Av Opp Dickson Interchange
    ID 4552
    70 m • 1 min
  • 8
    Bus - 99
    Wait for bus
    9
    Belconnen
  • 9
    Ride to bus station
    Ride to bus station
    Watkin St After Battye St
    ID 3460
    8 min
  • 10
    Walk to Bruce
    Walk to
    Bruce
    Haydon Drive
    370 m • 5 min
*Duration based on 8am traffic

From Paul Coe Cr After Noongale Cct to Bruce by bus

To get from Paul Coe Cr After Noongale Cct to Bruce in Canberra, you’ll need to take 3 bus lines: take the 27 bus from Mirrabei Dr Before Shoalhaven Av station to Gungahlin Place Plt 3 Arrivals station. Next, you’ll have to switch to the 18 bus and finally take the 9 bus from Dickson Interchange Plt 2 station to Watkin St After Battye St station. The total trip duration for this route is approximately 1 hr 6 min. The bus and light rail schedule from Paul Coe Cr After Noongale Cct may change. We recommend you check the updated bus and light rail schedule to Bruce on the Moovit app.

66min
Walk to bus station
Bus - 2727
Bus - 1818
Bus - 99
Walk to Bruce
Leaves from Mirrabei Dr Before Shoalhaven Av

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Mirrabei Dr Before Shoalhaven Av
    ID 4712
    360 m • 5 min
  • 2
    Bus - 2727
    Wait for bus
    27
    Gungahlin
  • 3
    Ride to bus station
    Ride to bus station
    Gungahlin Place Plt 3 Arrivals
    ID 1801
    5 min
  • 4
    Bus - 1818
    Wait for bus
    18
    Dickson Via Bimberi
  • 5
    Ride to bus station
    Ride to bus station
    Dickson Interchange Plt 1
    ID 945
    32 min
  • 6
    Walk to bus station
    Walk to bus station
    Dickson Interchange Plt 2
    ID 946
    50 m • 1 min
  • 7
    Bus - 99
    Wait for bus
    9
    Belconnen
  • 8
    Ride to bus station
    Ride to bus station
    Watkin St After Battye St
    ID 3460
    11 min
  • 9
    Walk to Bruce
    Walk to
    Bruce
    Haydon Drive
    370 m • 5 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Canberra.
All local mobility options in one app

Public transport directions from Paul Coe Cr After Noongale Cct to Bruce

The distance between Paul Coe Cr After Noongale Cct, Canberra and Bruce, Canberra is approximately 16.69 km, which can typically be travelled in 62 min. Moovit will show you the directions from Paul Coe Cr After Noongale Cct to Bruce by bus and light rail, so no matter how you choose to travel in Canberra – you will always have plenty of easy options.

Bus And Light Rail schedule from Paul Coe Cr After Noongale Cct to Bruce

To check the bus and light rail schedule from Paul Coe Cr After Noongale Cct to Bruce using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Paul Coe Cr After Noongale Cct) and destination (Bruce), then select the desired date and time of travel. Moovit will show all available bus and light rail routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and light rail, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and light rail schedules.

Related Routes

From Paul Coe Cr After Noongale Cct to Bruce by bus

To get from Paul Coe Cr After Noongale Cct to Bruce in Canberra, you’ll need to take 3 bus lines: take the 27 bus from Mirrabei Dr Before Shoalhaven Av station to Gungahlin Place Plt 3 Arrivals station. Next, you’ll have to switch to the 18 bus and finally take the 9 bus from Dickson Interchange Plt 2 station to Watkin St After Battye St station. The total trip duration for this route is approximately 1 hr 6 min. The bus and light rail schedule from Paul Coe Cr After Noongale Cct may change. We recommend you check the updated bus and light rail schedule to Bruce on the Moovit app.

66min
Walk to bus station
Bus - 2727
Bus - 1818
Bus - 99
Walk to Bruce
Leaves from Mirrabei Dr Before Shoalhaven Av

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Mirrabei Dr Before Shoalhaven Av
    ID 4712
    360 m • 5 min
  • 2
    Bus - 2727
    Wait for bus
    27
    Gungahlin
  • 3
    Ride to bus station
    Ride to bus station
    Gungahlin Place Plt 3 Arrivals
    ID 1801
    5 min
  • 4
    Bus - 1818
    Wait for bus
    18
    Dickson Via Bimberi
  • 5
    Ride to bus station
    Ride to bus station
    Dickson Interchange Plt 1
    ID 945
    32 min
  • 6
    Walk to bus station
    Walk to bus station
    Dickson Interchange Plt 2
    ID 946
    50 m • 1 min
  • 7
    Bus - 99
    Wait for bus
    9
    Belconnen
  • 8
    Ride to bus station
    Ride to bus station
    Watkin St After Battye St
    ID 3460
    11 min
  • 9
    Walk to Bruce
    Walk to
    Bruce
    Haydon Drive
    370 m • 5 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Paul Coe Cr After Noongale Cct to Bruce?

    The fastest way takes 62 minutes, using Bus line 27, Light Rail line 1, Bus line 9.

  • What is the alternative route to get from Paul Coe Cr After Noongale Cct to Bruce?

    The alternative route takes 66 minutes, using Bus line 27, Bus line 18, Bus line 9.

  • Is there a direct bus between Paul Coe Cr After Noongale Cct and Bruce in Canberra?

    No, you’ll have to take 2 bus lines and one light rail line in total. The total travelling time is 1 hr 2 min.

  • Which bus line goes from Paul Coe Cr After Noongale Cct to Bruce in Canberra?

    The 27 bus line goes from Mirrabei Dr Before Shoalhaven Av station near Paul Coe Cr After Noongale Cct to Gungahlin station. From there you’ll have to take one bus line and one light rail line till Gungahlin station near Bruce in Canberra.

  • How long does it take to travel from Paul Coe Cr After Noongale Cct to Bruce in Canberra by bus and light rail?

    The total travel time between Paul Coe Cr After Noongale Cct and Bruce in Canberra by bus and light rail is about 1 hr 2 min.

  • Where do I get on the bus near Paul Coe Cr After Noongale Cct to get to Bruce in Canberra?

    Get on the 27 bus from the Mirrabei Dr Before Shoalhaven Av stop near Paul Coe Cr After Noongale Cct in Canberra.

  • Where do I get off the bus when travelling between Paul Coe Cr After Noongale Cct and Bruce in Canberra?

    Get off the bus at the Gungahlin stop, which is closest to Bruce in Canberra.

Popular Routes