How to get from Kensington to Clarkson by bus and train?
From Kensington to Clarkson by bus and train
To get from Kensington to Clarkson in Perth, you’ll need to take one bus line and 2 train lines: take the 910 bus from Canning Hwy Before Gwenyfred Rd station to Canning Bridge Stn station. Next, you’ll have to switch to the MANDURAH LINE train and finally take the YANCHEP LINE train from Perth Underground Stn station to Clarkson Stn station. The total trip duration for this route is approximately 1 hr 1 min. The ride fare is A$4.59.
Step by Step
- 1Start from bus stationKensington
- 2Wait for bus910Fremantle Stn
- 3Ride to bus stationCanning Bridge StnID 839 min
- 4Wait for trainMANDURAH LINEPerth Underground Stn
- 5Ride to train stationPerth Underground StnID 648 min
- 6Wait for trainYANCHEP LINEYanchep Stn
- 7Ride to train stationClarkson StnID 8532 min
Alternative route from Kensington to Clarkson by bus and train via 910 and YANCHEP LINE
To get from Kensington to Clarkson in Perth, take the 910 bus from Canning Hwy After Berwick St station to St Georges Tce Before Howard St Westbound station. Next, take the YANCHEP LINE train from Perth Underground Stn station to Clarkson Stn station. The total trip duration for this route is approximately 59 min. The ride fare is A$4.59.
Step by Step
- 1Walk to bus stationCanning Hwy After Berwick StID 10342200 m • 3 min
- 2Wait for bus910Perth Busport
- 3Ride to bus stationSt Georges Tce Before Howard St WestboundID 11213 min
- 4Walk to train stationPerth Underground StnID 64590 m • 7 min
- 5Wait for trainYANCHEP LINEYanchep Stn
- 6Ride to train stationClarkson StnID 8532 min
Public transport directions from Kensington to Clarkson
Public transport stations close to Kensington
Kensington is located at Kensington, Perth and the nearest public transport station is Canning Hwy After Berwick St.
Train stations close to Kensington:
- Burswood Stn
- Mciver Stn
- Perth Stadium Stn
Bus stations close to Kensington:
- Canning Hwy After Berwick St
- Lansdowne Rd After Canning Hwy
- Canning Hwy After Way Rd
Ferry stations close to Kensington:
- Ferry Route Mends St Jetty
Public transport stations close to Clarkson, Perth
Clarkson is located at Clarkson, Perth and the nearest public transport station is Clarkson Stn.
Bus stations close to Clarkson:
- Clarkson Stn
- Ocean Keys Bvd After Sidcup L
- Ocean Keys Bvd After Verrado Wy
Related Routes
- Armadale to Clarkson
- Ashfield to Clarkson
- Atwell to Clarkson
- Aubin Grove to Clarkson
- Baldivis to Clarkson
- Balga to Clarkson
- Bassendean to Clarkson
- Beckenham to Clarkson
- Bentley to Clarkson
- Burns Beach to Clarkson
- Busselton to Clarkson
- Carlisle to Clarkson
- Carramar to Clarkson
- Coogee to Clarkson
- Cooloongup to Clarkson
- Dalkeith to Clarkson
- Darch to Clarkson
- Dawesville to Clarkson
- Eglinton to Clarkson
- Ellenbrook to Clarkson
Alternative route from Kensington to Clarkson by bus and train via 910 and YANCHEP LINE
To get from Kensington to Clarkson in Perth, take the 910 bus from Canning Hwy After Berwick St station to St Georges Tce Before Howard St Westbound station. Next, take the YANCHEP LINE train from Perth Underground Stn station to Clarkson Stn station. The total trip duration for this route is approximately 59 min. The ride fare is A$4.59.
Step by Step
- 1Walk to bus stationCanning Hwy After Berwick StID 10342200 m • 3 min
- 2Wait for bus910Perth Busport
- 3Ride to bus stationSt Georges Tce Before Howard St WestboundID 11213 min
- 4Walk to train stationPerth Underground StnID 64590 m • 7 min
- 5Wait for trainYANCHEP LINEYanchep Stn
- 6Ride to train stationClarkson StnID 8532 min
Questions & Answers
What is the fastest way to get from Kensington to Clarkson?
The fastest way takes 61 minutes, using Bus line 910, Bus line MANDURAH LINE, Bus line YANCHEP LINE.
What is the alternative route to get from Kensington to Clarkson?
The alternative route takes 59 minutes, using Bus line 910, Bus line YANCHEP LINE.
Is there a direct bus between Kensington and Clarkson in Perth?
No, you’ll have to take one bus line and 2 train lines in total. The total travelling time is 1 hr 1 min.
Which bus line goes from Kensington to Clarkson in Perth?
The 910 bus line goes from Fremantle Stn station near Kensington to Canning Bridge Stn station. From there you’ll have to take 2 train lines till Canning Bridge Stn station near Clarkson in Perth
How long does it take to travel from Kensington to Clarkson in Perth by bus and train?
The total travel time between Kensington and Clarkson in Perth by bus and train is about 1 hr 1 min.
Where do I get on the bus near Kensington to get to Clarkson in Perth?
Get on the 910 bus from the Fremantle Stn stop near Kensington in Perth.
Where do I get off the bus when travelling between Kensington and Clarkson in Perth?
Get off the bus at the Canning Bridge Stn station, which is closest to Clarkson in Perth.
How much is the bus fare from Kensington to Clarkson?
The ride from Kensington to Clarkson costs A$4.59.