How to get from Hardware St/Lonsdale St to Deepdene by bus and tram?

From Hardware St/Lonsdale St to Deepdene by bus and tram

To get from Hardware St/Lonsdale St to Deepdene in Balwyn, take the 907 bus from Hardware St/Lonsdale St station to Australian Catholic University/Victoria Pde station. Next, take the 109 tram from Lansdowne St/Victoria Pde #13 station to Deepdene Shopping Centre/Whitehorse Rd #43 station. The total trip duration for this route is approximately 35 min. The ride fare is A$5.30.

35minA$5.30
Bus - 907
907
Tram - 109
109
Walk to Deepdene
Leaves from Hardware St/Lonsdale St

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Hardware St/Lonsdale St
  • 2
    Bus - 907907
    Wait for bus
    907
    Mitcham Station
  • 3
    Ride to bus station
    Ride to bus station
    Australian Catholic University/Victoria Pde
    ID 47718
    6 min
  • 4
    Walk to tram station
    Walk to tram station
    Lansdowne St/Victoria Pde #13
    ID 19374
    30 m • 1 min
  • 5
    Tram - 109109
    Wait for tram
    109
    Box Hill
  • 6
    Ride to tram station
    Ride to tram station
    Deepdene Shopping Centre/Whitehorse Rd #43
    ID 19405
    22 min
  • 7
    Walk to Deepdene
    Walk to
    Deepdene
    Walsh Street
    240 m • 4 min
*Duration based on 8am traffic

From Hardware St/Lonsdale St to Deepdene by bus

Take one direct bus from Hardware St/Lonsdale St to Deepdene in Balwyn: take the 302 bus from Hardware St/Lonsdale St station to Lawson St/Belmore Rd station. The total trip duration for this route is approximately 43 min. The ride fare is A$5.30.

43minA$5.30
Bus - 302
302
Walk to Deepdene
Leaves from Hardware St/Lonsdale St

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Hardware St/Lonsdale St
  • 2
    Bus - 302302
    Wait for bus
    302
    Box Hill Station
  • 3
    Ride to bus station
    Ride to bus station
    Lawson St/Belmore Rd
    ID 4643
    25 min
  • 4
    Walk to Deepdene
    Walk to
    Deepdene
    Walsh Street
    1.46 km • 19 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Melbourne.
All local mobility options in one app

Public transport directions from Hardware St/Lonsdale St to Deepdene

The distance between Hardware St/Lonsdale St, Balwyn and Deepdene, Balwyn is approximately 10.15 km, which can typically be travelled in 35 min. Moovit will show you the directions from Hardware St/Lonsdale St to Deepdene by bus and tram, so no matter how you choose to travel in Balwyn – you will always have plenty of easy options.

Related Routes

From Hardware St/Lonsdale St to Deepdene by bus

Take one direct bus from Hardware St/Lonsdale St to Deepdene in Balwyn: take the 302 bus from Hardware St/Lonsdale St station to Lawson St/Belmore Rd station. The total trip duration for this route is approximately 43 min. The ride fare is A$5.30.

43minA$5.30
Bus - 302
302
Walk to Deepdene
Leaves from Hardware St/Lonsdale St

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Hardware St/Lonsdale St
  • 2
    Bus - 302302
    Wait for bus
    302
    Box Hill Station
  • 3
    Ride to bus station
    Ride to bus station
    Lawson St/Belmore Rd
    ID 4643
    25 min
  • 4
    Walk to Deepdene
    Walk to
    Deepdene
    Walsh Street
    1.46 km • 19 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Hardware St/Lonsdale St to Deepdene?

    The fastest way takes 35 minutes, using Bus line 907, Tram line 109.

  • What is the alternative route to get from Hardware St/Lonsdale St to Deepdene?

    The alternative route takes 43 minutes, using Bus line 302.

  • Is there a direct bus between Hardware St/Lonsdale St and Deepdene?

    No, you’ll have to take one bus line and one tram line in total. The total travelling time is 35 min.

  • Which bus line goes from Hardware St/Lonsdale St to Deepdene?

    The 907 bus line goes from Mitcham Station station near Hardware St/Lonsdale St in Melbourne to Australian Catholic University/Victoria Pde station. From there you’ll have to take one tram line till Australian Catholic University/Victoria Pde station near Deepdene in Balwyn.

  • How long does it take to travel from Hardware St/Lonsdale St to Deepdene by bus and tram?

    The total travel time between Hardware St/Lonsdale St in Melbourne and Deepdene in Balwyn by bus and tram is about 35 min.

  • Where do I get on the bus near Hardware St/Lonsdale St to get to Deepdene?

    Get on the 907 bus from the Mitcham Station stop near Hardware St/Lonsdale St in Melbourne.

  • Where do I get off the bus when travelling between Hardware St/Lonsdale St and Deepdene?

    Get off the bus at the Australian Catholic University/Victoria Pde station, which is closest to Deepdene in Balwyn.

  • When is the first bus from Hardware St/Lonsdale St to Deepdene?

    The first bus from Hardware St/Lonsdale St in Melbourne to Deepdene in Balwyn is Doncaster SC - City (Queen St). It leaves the Hardware St/Lonsdale St stop at 11:07.

  • When is the first train from Hardware St/Lonsdale St to Deepdene?

    The first train from Hardware St/Lonsdale St in Melbourne to Deepdene in Balwyn is Lilydale - City. It leaves the Flinders Street Railway Station station at 16:02.

  • How much is the bus fare from Hardware St/Lonsdale St to Deepdene?

    The ride from Hardware St/Lonsdale St to Deepdene costs A$5.30.

Popular Routes