How to get from Canopus Cr After Hirst Pl to Farrer by bus?

Canopus Cr After Hirst Pl to Farrer - Bus Timetable

The 8 bus from Canopus Cr After Hirst Pl to Farrer runs from 05:54 to 22:54, with departures every 5-30 min. The journey takes about 1 hr 35 min, with regular service throughout the operating hours.

From Canopus Cr After Hirst Pl to Farrer by bus

To get from Canopus Cr After Hirst Pl to Farrer in Canberra, take the 8 bus from Gundaroo Dr After Chuculba Cr station to Belconnen Interchange Arrivals station. Next, take the 4 bus from Belconnen Interchange Plt 1 station to Athllon Dr at Beasley St station. The total trip duration for this route is approximately 1 hr 35 min. The bus schedule from Canopus Cr After Hirst Pl may change. We recommend you check the updated bus schedule to Farrer on the Moovit app.

95min
Walk to bus station
Bus - 88
Bus - 44
Walk to Farrer
Leaves from Gundaroo Dr After Chuculba Cr

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Gundaroo Dr After Chuculba Cr
    ID 4792
    1.5 km • 19 min
  • 2
    Bus - 88
    Wait for bus
    8
    Belconnen
  • 3
    Ride to bus station
    Ride to bus station
    Belconnen Interchange Arrivals
    ID 5517
    8 min
  • 4
    Walk to bus station
    Walk to bus station
    Belconnen Interchange Plt 1
    ID 5511
    150 m • 2 min
  • 5
    Bus - 44
    Wait for bus
    4
    Tuggeranong
  • 6
    Ride to bus station
    Ride to bus station
    Athllon Dr at Beasley St
    ID 2673
    40 min
  • 7
    Walk to Farrer
    Walk to
    Farrer
    Longerenong Street
    1.4 km • 18 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Canberra.
All local mobility options in one app

Public transport directions from Canopus Cr After Hirst Pl to Farrer

The distance between Canopus Cr After Hirst Pl, Canberra and Farrer, Canberra is approximately 31.5 km, which can typically be travelled in 95 min. Moovit will show you the directions from Canopus Cr After Hirst Pl to Farrer by bus, so no matter how you choose to travel in Canberra – you will always have plenty of easy options.

Bus timetable from Canopus Cr After Hirst Pl to Farrer

To check the bus timetable from Canopus Cr After Hirst Pl to Farrer using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Canopus Cr After Hirst Pl) and destination (Farrer), then select the desired date and time of travel. Moovit will show all available bus routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus, as well as real-time updates for delays or changes. Use this information to plan your journey and stay up to date with the latest bus timetables.

Related Routes

Questions & Answers

  • What is the fastest way to get from Canopus Cr After Hirst Pl to Farrer?

    The fastest way takes 95 minutes, using Bus line 8, Bus line 4.

  • Is there a direct bus between Canopus Cr After Hirst Pl and Farrer in Canberra?

    No, you’ll have to take 2 bus lines in total. The total travelling time is 1 hr 35 min.

  • Which bus line goes from Canopus Cr After Hirst Pl to Farrer in Canberra?

    The 8 bus line goes from Gundaroo Dr After Chuculba Cr station near Canopus Cr After Hirst Pl to Belconnen Interchange Arrivals station. From there you’ll have to take one bus line till Belconnen Interchange Arrivals station near Farrer in Canberra.

  • How long does it take to travel from Canopus Cr After Hirst Pl to Farrer in Canberra by bus?

    The total travel time between Canopus Cr After Hirst Pl and Farrer in Canberra by bus is about 1 hr 35 min.

  • Where do I get on the bus near Canopus Cr After Hirst Pl to get to Farrer in Canberra?

    Get on the 8 bus from the Gundaroo Dr After Chuculba Cr stop near Canopus Cr After Hirst Pl in Canberra.

  • Where do I get off the bus when travelling between Canopus Cr After Hirst Pl and Farrer in Canberra?

    Get off the bus at the Belconnen Interchange Arrivals stop, which is closest to Farrer in Canberra.

Popular Routes