How to get from Beerwah Station to Margate QLD Australia by bus and train?

From Beerwah Station to Margate QLD Australia by bus and train

To get from Beerwah Station to Margate QLD Australia you’ll need to take 2 train lines and one bus line: take the NAIP train from Beerwah Station station to Petrie Station station. Next, you’ll have to switch to the RWRP train and finally take the 694 bus from Kippa-Ring Stations, Stop B station to Oxley Ave at Margate Shopping Centre station. The total trip duration for this route is approximately 1 hr 41 min. The ride fare is A$5.30.

101minA$5.30
Train - NAIPNAIP
Train - RWRPRWRP
Bus - 694694
Walk to Margate QLD Australia
Leaves from Beerwah Station

Step by Step

  • 1
    Start from train station
    Start from train station
    Beerwah Station
  • 2
    Train - NAIPNAIP
    Wait for train
    NAIP
    Ipswich Station
  • 3
    Ride to train station
    Ride to train station
    Petrie Station
    45 min
  • 4
    Train - RWRPRWRP
    Wait for train
    RWRP
    Kippa-Ring Station
  • 5
    Ride to train station
    Ride to train station
    Kippa-Ring Station
    17 min
  • 6
    Walk to bus station
    Walk to bus station
    Kippa-Ring Stations, Stop B
    ID 319796
    130 m • 2 min
  • 7
    Bus - 694694
    Wait for bus
    694
    Redcliffe
  • 8
    Ride to bus station
    Ride to bus station
    Oxley Ave at Margate Shopping Centre
    ID 310713
    27 min
  • 9
    Walk to Margate QLD Australia
    Walk to
    Margate QLD Australia
    170 m • 3 min
*Duration based on 8am traffic

Alternative route from Beerwah Station to Margate QLD Australia by bus and train via NAIP, RWRP and 696

To get from Beerwah Station to Margate QLD Australia you’ll need to take 2 train lines and one bus line: take the NAIP train from Beerwah Station station to Petrie Station station. Next, you’ll have to switch to the RWRP train and finally take the 696 bus from Kippa-Ring Stations, Stop B station to Victoria Ave at Duffield Road station. The total trip duration for this route is approximately 1 hr 37 min. The ride fare is A$5.30.

97minA$5.30
Train - NAIPNAIP
Train - RWRPRWRP
Bus - 696696
Walk to Margate QLD Australia
Leaves from Beerwah Station

Step by Step

  • 1
    Start from train station
    Start from train station
    Beerwah Station
  • 2
    Train - NAIPNAIP
    Wait for train
    NAIP
    Ipswich Station
  • 3
    Ride to train station
    Ride to train station
    Petrie Station
    45 min
  • 4
    Train - RWRPRWRP
    Wait for train
    RWRP
    Kippa-Ring Station
  • 5
    Ride to train station
    Ride to train station
    Kippa-Ring Station
    17 min
  • 6
    Walk to bus station
    Walk to bus station
    Kippa-Ring Stations, Stop B
    ID 319796
    130 m • 2 min
  • 7
    Bus - 696696
    Wait for bus
    696
    Kippa-Ring Loop
  • 8
    Ride to bus station
    Ride to bus station
    Victoria Ave at Duffield Road
    ID 310719
    9 min
  • 9
    Walk to Margate QLD Australia
    Walk to
    Margate QLD Australia
    750 m • 10 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Brisbane.
All local mobility options in one app

Public transport directions from Beerwah Station to Margate QLD Australia

The distance between Beerwah Station and Margate QLD Australia is approximately 72.53 km, which can typically be travelled in 101 min. Moovit will show you the directions from Beerwah Station to Margate QLD Australia by bus and train, so no matter how you choose to travel in Margate – you will always have plenty of easy options.

Related Routes

Alternative route from Beerwah Station to Margate QLD Australia by bus and train via NAIP, RWRP and 696

To get from Beerwah Station to Margate QLD Australia you’ll need to take 2 train lines and one bus line: take the NAIP train from Beerwah Station station to Petrie Station station. Next, you’ll have to switch to the RWRP train and finally take the 696 bus from Kippa-Ring Stations, Stop B station to Victoria Ave at Duffield Road station. The total trip duration for this route is approximately 1 hr 37 min. The ride fare is A$5.30.

97minA$5.30
Train - NAIPNAIP
Train - RWRPRWRP
Bus - 696696
Walk to Margate QLD Australia
Leaves from Beerwah Station

Step by Step

  • 1
    Start from train station
    Start from train station
    Beerwah Station
  • 2
    Train - NAIPNAIP
    Wait for train
    NAIP
    Ipswich Station
  • 3
    Ride to train station
    Ride to train station
    Petrie Station
    45 min
  • 4
    Train - RWRPRWRP
    Wait for train
    RWRP
    Kippa-Ring Station
  • 5
    Ride to train station
    Ride to train station
    Kippa-Ring Station
    17 min
  • 6
    Walk to bus station
    Walk to bus station
    Kippa-Ring Stations, Stop B
    ID 319796
    130 m • 2 min
  • 7
    Bus - 696696
    Wait for bus
    696
    Kippa-Ring Loop
  • 8
    Ride to bus station
    Ride to bus station
    Victoria Ave at Duffield Road
    ID 310719
    9 min
  • 9
    Walk to Margate QLD Australia
    Walk to
    Margate QLD Australia
    750 m • 10 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Beerwah Station to Margate QLD Australia?

    The fastest way takes 101 minutes, using Train line NAIP, Train line RWRP, Bus line 694.

  • What is the alternative route to get from Beerwah Station to Margate QLD Australia?

    The alternative route takes 97 minutes, using Train line NAIP, Train line RWRP, Bus line 696.

  • Is there a direct train between Beerwah Station and Margate QLD Australia?

    No, you’ll have to take 2 train lines and one bus line in total. The total travelling time is 1 hr 41 min.

  • Which train line goes from Beerwah Station to Margate QLD Australia?

    The NAIP train line goes from Ipswich Station station near Beerwah Station in Beerwah to Petrie Station station. From there you’ll have to take one train line and one bus line till Petrie Station station near Margate QLD Australia.

  • How long does it take to travel from Beerwah Station to Margate QLD Australia by train and bus?

    The total travel time between Beerwah Station and Margate QLD Australia by train and bus is about 1 hr 41 min.

  • Where do I get on the train near Beerwah Station to get to Margate QLD Australia?

    Get on the NAIP train from the Ipswich Station station near Beerwah Station in Beerwah.

  • Where do I get off the train when travelling between Beerwah Station and Margate QLD Australia?

    Get off the train at the Petrie Station stop, which is closest to Margate QLD Australia.

  • How much is the total train and bus fare from Beerwah Station to Margate QLD Australia?

    The ride from Beerwah Station to Margate QLD Australia costs A$5.30.

Popular Routes