• Australia
  • Melbourne
  • Melbourne Central Station/Swanston St #8 - Monash University Building 72 Faculty of Engineering

How to get from Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering by bus and tram?

From Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering by bus and tram

To get from Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering in Clayton, you’ll need to take one tram line and one bus line: take the 1 tram from 8-Melbourne Central Station/Swanston St (Melbourne City) station to 13-Federation Square/Swanston St (Melbourne City) station. Next, you’ll have to switch to the and finally take the 601 bus from Huntingdale Station/Haughton Rd (Oakleigh) station to Monash University (Clayton) station. The total trip duration for this route is approximately 56 min.

56min
Tram - 1
1
PAKENHAM
1
Bus - 601
601
Walk to Monash University Building 72 Faculty of Engineering
Leaves from 8-Melbourne Central Station/Swanston St (Melbourne City)

Step by Step

  • 1
    Start from tram station
    Start from tram station
    Melbourne Central Station/Swanston St #8
  • 2
    Tram - 11
    Wait for tram
    1
    South Melbourne Beach
  • 3
    Ride to tram station
    Ride to tram station
    13-Federation Square/Swanston St (Melbourne City)
    ID 19499
    6 min
  • 4
    Walk to
    Walk to
    Flinders Street Railway Station
    ID Parentvic:rail:FSS
    180 m • 3 min
  • 5
    PAKENHAM1
    Wait for
    PAKENHAM
    East Pakenham
  • 6
    Travel to
    Travel to
    Huntingdale Railway Station
    ID Parentvic:rail:HUN
    25 min
  • 7
    Walk to bus station
    Walk to bus station
    Huntingdale Station/Haughton Rd (Oakleigh)
    ID 51587
    40 m • 1 min
  • 8
    Bus - 601601
    Wait for bus
    601
    Monash University (Clayton)
  • 9
    Ride to bus station
    Ride to bus station
    Monash University (Clayton)
    ID 21611
    7 min
  • 10
    Walk to Monash University Building 72 Faculty of Engineering
    Walk to
    Monash University Building 72 Faculty of Engineering
    Alliance Ln
    660 m • 9 min
*Duration based on 8am traffic

From Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering by , bus and tram

To get from Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering in Clayton, you’ll need to take one tram line and one bus line: take the 72 tram from 8-Melbourne Central Station/Swanston St (Melbourne City) station to 13-Federation Square/Swanston St (Melbourne City) station. Next, you’ll have to switch to the and finally take the 601 bus from Huntingdale Station/Haughton Rd (Oakleigh) station to Monash University (Clayton) station. The total trip duration for this route is approximately 57 min.

57min
Tram - 72
72
Bus - 601
601
Walk to Monash University Building 72 Faculty of Engineering
Leaves from 8-Melbourne Central Station/Swanston St (Melbourne City)

Step by Step

  • 1
    Start from tram station
    Start from tram station
    Melbourne Central Station/Swanston St #8
  • 2
    Tram - 7272
    Wait for tram
    72
    Camberwell
  • 3
    Ride to tram station
    Ride to tram station
    13-Federation Square/Swanston St (Melbourne City)
    ID 19499
    6 min
  • 4
    Walk to
    Walk to
    Flinders Street Railway Station
    ID Parentvic:rail:FSS
    180 m • 3 min
  • 5
    Wait for
    PAKENHAM
    East Pakenham
  • 6
    Travel to
    Travel to
    Huntingdale Railway Station
    ID Parentvic:rail:HUN
    25 min
  • 7
    Walk to bus station
    Walk to bus station
    Huntingdale Station/Haughton Rd (Oakleigh)
    ID 51587
    40 m • 1 min
  • 8
    Bus - 601601
    Wait for bus
    601
    Monash University (Clayton)
  • 9
    Ride to bus station
    Ride to bus station
    Monash University (Clayton)
    ID 21611
    7 min
  • 10
    Walk to Monash University Building 72 Faculty of Engineering
    Walk to
    Monash University Building 72 Faculty of Engineering
    Alliance Ln
    660 m • 9 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Melbourne.
All local mobility options in one app

Public transport directions from Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering

The distance between Melbourne Central Station/Swanston St #8, Clayton and Monash University Building 72 Faculty of Engineering, Clayton is approximately 21.75 km, which can typically be travelled in 56 min. Moovit will show you the directions from Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering by bus and tram, so no matter how you choose to travel in Clayton – you will always have plenty of easy options.

Related Routes

From Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering by , bus and tram

To get from Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering in Clayton, you’ll need to take one tram line and one bus line: take the 72 tram from 8-Melbourne Central Station/Swanston St (Melbourne City) station to 13-Federation Square/Swanston St (Melbourne City) station. Next, you’ll have to switch to the and finally take the 601 bus from Huntingdale Station/Haughton Rd (Oakleigh) station to Monash University (Clayton) station. The total trip duration for this route is approximately 57 min.

57min
Tram - 72
72
Bus - 601
601
Walk to Monash University Building 72 Faculty of Engineering
Leaves from 8-Melbourne Central Station/Swanston St (Melbourne City)

Step by Step

  • 1
    Start from tram station
    Start from tram station
    Melbourne Central Station/Swanston St #8
  • 2
    Tram - 7272
    Wait for tram
    72
    Camberwell
  • 3
    Ride to tram station
    Ride to tram station
    13-Federation Square/Swanston St (Melbourne City)
    ID 19499
    6 min
  • 4
    Walk to
    Walk to
    Flinders Street Railway Station
    ID Parentvic:rail:FSS
    180 m • 3 min
  • 5
    Wait for
    PAKENHAM
    East Pakenham
  • 6
    Travel to
    Travel to
    Huntingdale Railway Station
    ID Parentvic:rail:HUN
    25 min
  • 7
    Walk to bus station
    Walk to bus station
    Huntingdale Station/Haughton Rd (Oakleigh)
    ID 51587
    40 m • 1 min
  • 8
    Bus - 601601
    Wait for bus
    601
    Monash University (Clayton)
  • 9
    Ride to bus station
    Ride to bus station
    Monash University (Clayton)
    ID 21611
    7 min
  • 10
    Walk to Monash University Building 72 Faculty of Engineering
    Walk to
    Monash University Building 72 Faculty of Engineering
    Alliance Ln
    660 m • 9 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering?

    The fastest way takes 56 minutes, using Tram line 1, , Bus line 601.

  • What is the alternative route to get from Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering?

    The alternative route takes 57 minutes, using Tram line 72, , Bus line 601.

  • Is there a direct tram between Melbourne Central Station/Swanston St #8 and Monash University Building 72 Faculty of Engineering?

    No, you’ll have to take one tram line and one bus line in total. The total travelling time is 56 min.

  • Which tram line goes from Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering?

    The 1 tram line goes from South Melbourne Beach station near Melbourne Central Station/Swanston St #8 in Melbourne to 13-Federation Square/Swanston St (Melbourne City) station. From there you’ll have to take one bus line till 13-Federation Square/Swanston St (Melbourne City) station near Monash University Building 72 Faculty of Engineering in Clayton.

  • How long does it take to travel from Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering by tram and bus?

    The total travel time between Melbourne Central Station/Swanston St #8 in Melbourne and Monash University Building 72 Faculty of Engineering in Clayton by tram and bus is about 56 min.

  • Where do I get on the tram near Melbourne Central Station/Swanston St #8 to get to Monash University Building 72 Faculty of Engineering?

    Get on the 1 tram from the South Melbourne Beach station near Melbourne Central Station/Swanston St #8 in Melbourne.

  • Where do I get off the tram when travelling between Melbourne Central Station/Swanston St #8 and Monash University Building 72 Faculty of Engineering?

    Get off the tram at the 13-Federation Square/Swanston St (Melbourne City) stop, which is closest to Monash University Building 72 Faculty of Engineering in Clayton.

  • When is the last train from Melbourne Central Station/Swanston St #8 to Monash University Building 72 Faculty of Engineering?

    The last train from Melbourne Central Station/Swanston St #8 in Melbourne to Monash University Building 72 Faculty of Engineering in Clayton is the Pakenham - City line. It leaves the Flinders Street Railway Station station at 11:17.

Popular Routes