How to get from Belgrave Station/Belgrave-Gembrook Rd to RMIT University by train and tram?

From Belgrave Station/Belgrave-Gembrook Rd to RMIT University by train and tram

To get from Belgrave Station/Belgrave-Gembrook Rd to RMIT University in Melbourne, you’ll need to take 2 train lines and one tram line: take the REPLACEMENT BUS train from Belgrave Railway Station station to Ringwood Railway Station station. Next, you’ll have to switch to the LILYDALE train and finally take the 16 tram from Federation Square/Swanston St #13 station to RMIT University/Swanston St #7 station. The total trip duration for this route is approximately 1 hr 53 min.

113min
Walk to train stationTrain - REPLACEMENT BUS
REPLACEMENT BUS
Train - LILYDALE
LILYDALE
Tram - 16
16
Walk to RMIT University
Leaves from Belgrave Railway Station

Step by Step

  • 1
    Walk to train station
    Walk to train station
    Belgrave Railway Station
    ID vic:rail:BEG
    90 m • 2 min
  • 2
    Train - REPLACEMENT BUSREPLACEMENT BUS
    Wait for train
    REPLACEMENT BUS
    Ringwood
  • 3
    Ride to train station
    Ride to train station
    Ringwood Railway Station
    ID vic:rail:RWD
    51 min
  • 4
    Walk to train station
    Walk to train station
    Ringwood Railway Station
    ID vic:rail:RWD
    230 m • 4 min
  • 5
    Train - LILYDALELILYDALE
    Wait for train
    LILYDALE
    Flinders Street
  • 6
    Ride to train station
    Ride to train station
    Flinders Street Railway Station
    ID vic:rail:FSS
    42 min
  • 7
    Walk to tram station
    Walk to tram station
    Federation Square/Swanston St #13
    ID 19685
    140 m • 2 min
  • 8
    Tram - 1616
    Wait for tram
    16
    Melbourne University
  • 9
    Ride to tram station
    Ride to tram station
    RMIT University/Swanston St #7
    ID 19691
    7 min
  • 10
    Walk to RMIT University
    Walk to
    RMIT University
    Elizabeth Street
    240 m • 4 min
*Duration based on 8am traffic

Alternative route from Belgrave Station/Belgrave-Gembrook Rd to RMIT University by train and tram via REPLACEMENT BUS, LILYDALE and 67

To get from Belgrave Station/Belgrave-Gembrook Rd to RMIT University in Melbourne, you’ll need to take 2 train lines and one tram line: take the REPLACEMENT BUS train from Belgrave Railway Station station to Ringwood Railway Station station. Next, you’ll have to switch to the LILYDALE train and finally take the 67 tram from Federation Square/Swanston St #13 station to RMIT University/Swanston St #7 station. The total trip duration for this route is approximately 1 hr 54 min.

114min
Walk to train stationTrain - REPLACEMENT BUS
REPLACEMENT BUS
Train - LILYDALE
LILYDALE
Tram - 67
67
Walk to RMIT University
Leaves from Belgrave Railway Station

Step by Step

  • 1
    Walk to train station
    Walk to train station
    Belgrave Railway Station
    ID vic:rail:BEG
    90 m • 2 min
  • 2
    Train - REPLACEMENT BUSREPLACEMENT BUS
    Wait for train
    REPLACEMENT BUS
    Ringwood
  • 3
    Ride to train station
    Ride to train station
    Ringwood Railway Station
    ID vic:rail:RWD
    51 min
  • 4
    Walk to train station
    Walk to train station
    Ringwood Railway Station
    ID vic:rail:RWD
    230 m • 4 min
  • 5
    Train - LILYDALELILYDALE
    Wait for train
    LILYDALE
    Flinders Street
  • 6
    Ride to train station
    Ride to train station
    Flinders Street Railway Station
    ID vic:rail:FSS
    42 min
  • 7
    Walk to tram station
    Walk to tram station
    Federation Square/Swanston St #13
    ID 19685
    140 m • 2 min
  • 8
    Tram - 6767
    Wait for tram
    67
    Melbourne University
  • 9
    Ride to tram station
    Ride to tram station
    RMIT University/Swanston St #7
    ID 19691
    7 min
  • 10
    Walk to RMIT University
    Walk to
    RMIT University
    Elizabeth Street
    240 m • 4 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Melbourne.
All local mobility options in one app

Public transport directions from Belgrave Station/Belgrave-Gembrook Rd to RMIT University

The distance between Belgrave Station/Belgrave-Gembrook Rd, Melbourne and RMIT University, Melbourne is approximately 46.47 km, which can typically be travelled in 113 min. Moovit will show you the directions from Belgrave Station/Belgrave-Gembrook Rd to RMIT University by train and tram, so no matter how you choose to travel in Melbourne – you will always have plenty of easy options.

Related Routes

Alternative route from Belgrave Station/Belgrave-Gembrook Rd to RMIT University by train and tram via REPLACEMENT BUS, LILYDALE and 67

To get from Belgrave Station/Belgrave-Gembrook Rd to RMIT University in Melbourne, you’ll need to take 2 train lines and one tram line: take the REPLACEMENT BUS train from Belgrave Railway Station station to Ringwood Railway Station station. Next, you’ll have to switch to the LILYDALE train and finally take the 67 tram from Federation Square/Swanston St #13 station to RMIT University/Swanston St #7 station. The total trip duration for this route is approximately 1 hr 54 min.

114min
Walk to train stationTrain - REPLACEMENT BUS
REPLACEMENT BUS
Train - LILYDALE
LILYDALE
Tram - 67
67
Walk to RMIT University
Leaves from Belgrave Railway Station

Step by Step

  • 1
    Walk to train station
    Walk to train station
    Belgrave Railway Station
    ID vic:rail:BEG
    90 m • 2 min
  • 2
    Train - REPLACEMENT BUSREPLACEMENT BUS
    Wait for train
    REPLACEMENT BUS
    Ringwood
  • 3
    Ride to train station
    Ride to train station
    Ringwood Railway Station
    ID vic:rail:RWD
    51 min
  • 4
    Walk to train station
    Walk to train station
    Ringwood Railway Station
    ID vic:rail:RWD
    230 m • 4 min
  • 5
    Train - LILYDALELILYDALE
    Wait for train
    LILYDALE
    Flinders Street
  • 6
    Ride to train station
    Ride to train station
    Flinders Street Railway Station
    ID vic:rail:FSS
    42 min
  • 7
    Walk to tram station
    Walk to tram station
    Federation Square/Swanston St #13
    ID 19685
    140 m • 2 min
  • 8
    Tram - 6767
    Wait for tram
    67
    Melbourne University
  • 9
    Ride to tram station
    Ride to tram station
    RMIT University/Swanston St #7
    ID 19691
    7 min
  • 10
    Walk to RMIT University
    Walk to
    RMIT University
    Elizabeth Street
    240 m • 4 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Belgrave Station/Belgrave-Gembrook Rd to RMIT University?

    The fastest way takes 113 minutes, using Train line REPLACEMENT BUS, Train line LILYDALE, Tram line 16.

  • What is the alternative route to get from Belgrave Station/Belgrave-Gembrook Rd to RMIT University?

    The alternative route takes 114 minutes, using Train line REPLACEMENT BUS, Train line LILYDALE, Tram line 67.

  • Is there a direct train between Belgrave Station/Belgrave-Gembrook Rd and RMIT University?

    No, you’ll have to take 2 train lines and one tram line in total. The total travelling time is 1 hr 53 min.

  • Which train line goes from Belgrave Station/Belgrave-Gembrook Rd to RMIT University?

    The REPLACEMENT BUS train line goes from Belgrave Railway Station station near Belgrave Station/Belgrave-Gembrook Rd in Belgrave to Ringwood station. From there you’ll have to take one train line and one tram line till Ringwood station near RMIT University in Melbourne.

  • How long does it take to travel from Belgrave Station/Belgrave-Gembrook Rd to RMIT University by train and tram?

    The total travel time between Belgrave Station/Belgrave-Gembrook Rd in Belgrave and RMIT University in Melbourne by train and tram is about 1 hr 53 min.

  • Where do I get on the train near Belgrave Station/Belgrave-Gembrook Rd to get to RMIT University?

    Get on the REPLACEMENT BUS train from the Belgrave Railway Station station near Belgrave Station/Belgrave-Gembrook Rd in Belgrave.

  • Where do I get off the train when travelling between Belgrave Station/Belgrave-Gembrook Rd and RMIT University?

    Get off the train at the Ringwood station, which is closest to RMIT University in Melbourne.

  • When is the first train from Belgrave Station/Belgrave-Gembrook Rd to RMIT University?

    The first train from Belgrave Station/Belgrave-Gembrook Rd in Belgrave to RMIT University in Melbourne is Belgrave - City. It leaves the Belgrave Railway Station station at 15:27.

Popular Routes