How to get from Whitby to Welshpool by bus and train?

From Whitby to Welshpool by bus and train

To get from Whitby to Welshpool in Perth, you’ll need to take 2 bus lines and one train line: take the 262 bus from Tinspar Av After Skyline Bvd station to Hammermill Dr After Sansimeon Bvd station. Next, you’ll have to switch to the ARMADALE LINE train and finally take the 282 bus from Oats Street Stn station to Orrong Rd Before Felspar St station. The total trip duration for this route is approximately 1 hr 28 min. The ride fare is A$4.59.

88minA$4.59
Bus - 262262
Train - ARMADALE LINEARMADALE LINE
Bus - 282282
Leaves from Tinspar Av After Skyline Bvd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Whitby
  • 2
    Bus - 262262
    Wait for bus
    262
    Byford Stn
  • 3
    Ride to bus station
    Ride to bus station
    Hammermill Dr After Sansimeon Bvd
    ID 29695
    25 min
  • 4
    Walk to train station
    Walk to train station
    Byford Stn
    ID 164
    440 m • 6 min
  • 5
    Train - ARMADALE LINEARMADALE LINE
    Wait for train
    ARMADALE LINE
    Perth Stn
  • 6
    Ride to train station
    Ride to train station
    Oats Street Stn
    ID 73
    31 min
  • 7
    Bus - 282282
    Wait for bus
    282
    Kalamunda Bus Stn
  • 8
    Ride to bus station Orrong Rd Before Felspar St
    Ride to bus station
    Orrong Rd Before Felspar St
    ID 21844
    9 min
*Duration based on 8am traffic

Alternative route from Whitby to Welshpool by bus and train via 262, ARMADALE LINE and 280

To get from Whitby to Welshpool in Perth, you’ll need to take 2 bus lines and one train line: take the 262 bus from Tinspar Av After Skyline Bvd station to Hammermill Dr After Sansimeon Bvd station. Next, you’ll have to switch to the ARMADALE LINE train and finally take the 280 bus from Cannington Stn station to Orrong Rd Before Felspar St station. The total trip duration for this route is approximately 1 hr 33 min. The ride fare is A$4.59.

93minA$4.59
Bus - 262262
Train - ARMADALE LINEARMADALE LINE
Bus - 280280
Leaves from Tinspar Av After Skyline Bvd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Whitby
  • 2
    Bus - 262262
    Wait for bus
    262
    Byford Stn
  • 3
    Ride to bus station
    Ride to bus station
    Hammermill Dr After Sansimeon Bvd
    ID 29695
    25 min
  • 4
    Walk to train station
    Walk to train station
    Byford Stn
    ID 164
    440 m • 6 min
  • 5
    Train - ARMADALE LINEARMADALE LINE
    Wait for train
    ARMADALE LINE
    Perth Stn
  • 6
    Ride to train station
    Ride to train station
    Cannington Stn
    ID 84
    27 min
  • 7
    Walk to bus station
    Walk to bus station
    Cannington Stn
    ID 84
    210 m • 3 min
  • 8
    Bus - 280280
    Wait for bus
    280
    High Wycombe Stn
  • 9
    Ride to bus station Orrong Rd Before Felspar St
    Ride to bus station
    Orrong Rd Before Felspar St
    ID 21844
    15 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Perth.
All local mobility options in one app

Public transport directions from Whitby to Welshpool

The distance between Whitby, Perth and Welshpool, Perth is approximately 46.99 km, which can typically be travelled in 88 min. Moovit will show you the directions from Whitby to Welshpool by bus and train, so no matter how you choose to travel in Perth – you will always have plenty of easy options.

Public transport stations close to Whitby

Whitby is located at Whitby, Perth and the nearest public transport station is Paterson St After Keirnan St.

Bus stations close to Whitby:

  • Paterson St After Keirnan St
  • Paterson St Before Keirnan St
  • Paterson St Before Tonkin St

Public transport stations close to Welshpool, Perth

Welshpool is located at Welshpool, Perth and the nearest public transport station is Elizabeth St After Crawford St.

Train stations close to Welshpool:

  • Beckenham Stn
  • Kenwick Stn

Bus stations close to Welshpool:

  • Elizabeth St After Crawford St
  • Elizabeth St After Station St
  • Station St After Luyer Av

Related Routes

Alternative route from Whitby to Welshpool by bus and train via 262, ARMADALE LINE and 280

To get from Whitby to Welshpool in Perth, you’ll need to take 2 bus lines and one train line: take the 262 bus from Tinspar Av After Skyline Bvd station to Hammermill Dr After Sansimeon Bvd station. Next, you’ll have to switch to the ARMADALE LINE train and finally take the 280 bus from Cannington Stn station to Orrong Rd Before Felspar St station. The total trip duration for this route is approximately 1 hr 33 min. The ride fare is A$4.59.

93minA$4.59
Bus - 262262
Train - ARMADALE LINEARMADALE LINE
Bus - 280280
Leaves from Tinspar Av After Skyline Bvd

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Whitby
  • 2
    Bus - 262262
    Wait for bus
    262
    Byford Stn
  • 3
    Ride to bus station
    Ride to bus station
    Hammermill Dr After Sansimeon Bvd
    ID 29695
    25 min
  • 4
    Walk to train station
    Walk to train station
    Byford Stn
    ID 164
    440 m • 6 min
  • 5
    Train - ARMADALE LINEARMADALE LINE
    Wait for train
    ARMADALE LINE
    Perth Stn
  • 6
    Ride to train station
    Ride to train station
    Cannington Stn
    ID 84
    27 min
  • 7
    Walk to bus station
    Walk to bus station
    Cannington Stn
    ID 84
    210 m • 3 min
  • 8
    Bus - 280280
    Wait for bus
    280
    High Wycombe Stn
  • 9
    Ride to bus station Orrong Rd Before Felspar St
    Ride to bus station
    Orrong Rd Before Felspar St
    ID 21844
    15 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Whitby to Welshpool?

    The fastest way takes 88 minutes, using Bus line 262, Train line ARMADALE LINE, Bus line 282.

  • What is the alternative route to get from Whitby to Welshpool?

    The alternative route takes 93 minutes, using Bus line 262, Train line ARMADALE LINE, Bus line 280.

  • Is there a direct bus between Whitby and Welshpool in Perth?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 1 hr 28 min.

  • Which bus line goes from Whitby to Welshpool in Perth?

    The 262 bus line goes from Byford Stn station near Whitby to Hammermill Dr After Sansimeon Bvd station. From there you’ll have to take one bus line and one train line till Hammermill Dr After Sansimeon Bvd station near Welshpool in Perth

  • How long does it take to travel from Whitby to Welshpool in Perth by bus and train?

    The total travel time between Whitby and Welshpool in Perth by bus and train is about 1 hr 28 min.

  • Where do I get on the bus near Whitby to get to Welshpool in Perth?

    Get on the 262 bus from the Byford Stn stop near Whitby in Perth.

  • Where do I get off the bus when travelling between Whitby and Welshpool in Perth?

    Get off the bus at the Hammermill Dr After Sansimeon Bvd stop, which is closest to Welshpool in Perth.

  • How much is the total bus and train fare from Whitby to Welshpool?

    The ride from Whitby to Welshpool costs A$4.59.

Popular Routes