How to get from San Donato Milanese to Arcore by train?
San Donato Milanese to Arcore - Train Schedule
The S1 train from San Donato Milanese to Arcore runs from 06:17 to 00:17, with departures every 30 min. The trip takes about 1 hr 49 min, with regular service throughout the operating hours.
From San Donato Milanese to Arcore by train
To get from San Donato Milanese to Arcore in Milan and Lombardy, take the S1 train from Borgolombardo station to Milan Porta Garibaldi (Passante) station. Next, take the R13 train from Milano Porta Garibaldi station to Arcore station. The total trip duration for this route is approximately 1 hr 49 min. The ride fare is €3.70. The train schedule from San Donato Milanese may change. We recommend you check the updated train schedule to Arcore on the Moovit app.
Step by Step
- 1Walk to train stationBorgolombardo780 m • 10 min
- 2Wait for trainS1Milan Bovisa Polytechnic
- 3Ride to train stationMilan Porta Garibaldi (Passante)27 min
- 4Walk to train stationMilano Porta Garibaldi100 m • 2 min
- 5Wait for trainR13Sondrio
- 6Ride to train stationArcore21 min
- 7Walk toArcore720 m • 10 min
Public transit directions from San Donato Milanese to Arcore
Train schedule from San Donato Milanese to Arcore
Related Routes
- Bormio to Arcore
- Campodolcino to Arcore
- Collio to Arcore
- Hydro to Arcore
- Gargnano to Arcore
- Lavenone to Arcore
- Limone Sul Garda to Arcore
- Livigno to Arcore
- Grosio to Arcore
- Grosotto to Arcore
- Ponte Di Legno to Arcore
- Temù to Arcore
- Tremosine to Arcore
- Vestone to Arcore
- Sondalo to Arcore
- Valdidentro to Arcore
- Vione to Arcore
- Balerna to Arcore
- Bedano to Arcore
- Bellinzona to Arcore
Questions & Answers
What is the fastest way to get from San Donato Milanese to Arcore?
The fastest way takes 109 minutes, using Train line S1, Train line R13.
Is there a direct train between San Donato Milanese and Arcore in Milan and Lombardy?
No, you’ll have to take 2 train lines in total. The total travelling time is 1 hr 49 min.
Which train line goes from San Donato Milanese to Arcore in Milan and Lombardy?
The S1 train line goes from Borgolombardo station near San Donato Milanese to Milan Porta Garibaldi (Passante) station. From there you’ll have to take one train line till Milan Porta Garibaldi (Passante) station near Arcore in Milan and Lombardy.
How long does it take to travel from San Donato Milanese to Arcore in Milan and Lombardy by train?
The total travel time between San Donato Milanese and Arcore in Milan and Lombardy by train is about 1 hr 49 min.
Where do I get on the train near San Donato Milanese to get to Arcore in Milan and Lombardy?
Get on the S1 train from the Borgolombardo station near San Donato Milanese in Milan and Lombardy.
Where do I get off the train when travelling between San Donato Milanese and Arcore in Milan and Lombardy?
Get off the train at the Milan Porta Garibaldi (Passante) station, which is closest to Arcore in Milan and Lombardy.
How much is the train fare from San Donato Milanese to Arcore?
The ride from San Donato Milanese to Arcore costs €3.70.
Popular Routes
- Brugherio to Cernusco Sul Naviglio
- Milan to Motta Visconti
- Linate Airport M4 to Gaetano Pini Hospital
- Lot to Milan Malpensa Terminal 2
- Milan Bovisa-Polytechnic to Sesto San Giovanni
- Seregno to Desio Hospital
- Central Station to Peschiera Borromeo
- San Fedele Intelvi to Como
- Milan Malpensa Airport (Mxp) to Ferno-Lonate Pozzolo
- Molino Dorino to Rho
- Monza to San Raffaele
- Comezzano-Cizzago to Brescia
- Milan Cadorna to Lampugnano
- Melegnano to Milan Linate Airport "E. Forlanini" (Lin)
- Lampugnano to Como
- Rho Fair to Cinisello Balsamo
- Milan Malpensa Airport (Mxp) to Tremezzo
- Rogoredo Station to Locate di Triulzi
- Central Station to Columbus Clinic
- Lampugnano to Foppolo