How to get from San Giuliano Milanese to Arcore by bus and train?

From San Giuliano Milanese to Arcore by bus and train

To get from San Giuliano Milanese to Arcore in Milan and Lombardy, you’ll need to take one bus line and 2 train lines: take the E038 bus from Via Emilia Via Tolstoi (S. Giuliano) station to San Giuliano Milanese SS 9 Via Roma /Sp 164 station. Next, you’ll have to switch to the S1 train and finally take the S8 train from Milano Porta Garibaldi station to Arcore station. The total trip duration for this route is approximately 1 hr 35 min.

95min
Walk to bus station
Bus - E038E038
Train - S1
Train - S8
Walk to Arcore
Leaves from Via Emilia Via Tolstoi (S. Giuliano)

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Via Emilia Via Tolstoi (S. Giuliano)
    ID 16264
    110 m • 2 min
  • 2
    Bus - E038E038
    Wait for bus
    E038
    Milano M3-Corsia1 Stallo1
  • 3
    Ride to bus station
    Ride to bus station
    San Giuliano Milanese SS 9 Via Roma /Sp 164
    ID SGN073
    3 min
  • 4
    Walk to train station
    Walk to train station
    San Giuliano Milanese
    160 m • 3 min
  • 5
    Train - S1
    Wait for train
    S1
    Saronno
  • 6
    Ride to train station
    Ride to train station
    Milano Porta Garibaldi (Passante)
    31 min
  • 7
    Walk to train station
    Walk to train station
    Milano Porta Garibaldi
    20 m • 1 min
  • 8
    Train - S8
    Wait for train
    S8
    Lecco
  • 9
    Ride to train station
    Ride to train station
    Arcore
    32 min
  • 10
    Walk to Arcore
    Walk to
    Arcore
    710 m • 10 min
*Duration based on 8am traffic

Alternative route from San Giuliano Milanese to Arcore by bus and train via E060, S1 and S8

To get from San Giuliano Milanese to Arcore in Milan and Lombardy, you’ll need to take one bus line and 2 train lines: take the E060 bus from San Giuliano Milanese SS 9 Via Emilia /Tolstoj station to Melegnano-Vle Repubblica/Via Per Carpiano station. Next, you’ll have to switch to the S1 train and finally take the S8 train from Milano Porta Garibaldi station to Arcore station. The total trip duration for this route is approximately 1 hr 33 min.

93min
Bus - E060E060
Train - S1
Train - S8
Walk to Arcore
Leaves from San Giuliano Milanese SS 9 Via Emilia /Tolstoj

Step by Step

  • 1
    Start from bus station
    Start from bus station
    San Giuliano Milanese
  • 2
    Bus - E060E060
    Wait for bus
    E060
    Sant'Angelo Lodigiano-Ospedale
  • 3
    Ride to bus station
    Ride to bus station
    Melegnano-Vle Repubblica/Via Per Carpiano
    ID mg3004
    9 min
  • 4
    Walk to train station
    Walk to train station
    Melegnano
    110 m • 2 min
  • 5
    Train - S1
    Wait for train
    S1
    Saronno
  • 6
    Ride to train station
    Ride to train station
    Milano Porta Garibaldi (Passante)
    36 min
  • 7
    Walk to train station
    Walk to train station
    Milano Porta Garibaldi
    20 m • 1 min
  • 8
    Train - S8
    Wait for train
    S8
    Lecco
  • 9
    Ride to train station
    Ride to train station
    Arcore
    21 min
  • 10
    Walk to Arcore
    Walk to
    Arcore
    710 m • 10 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Milan and Lombardy.
All local mobility options in one app

Public transit directions from San Giuliano Milanese to Arcore

The distance between San Giuliano Milanese, Milan and Lombardy and Arcore, Milan and Lombardy is approximately 36.12 km, which can typically be travelled in 95 min. Moovit will show you the directions from San Giuliano Milanese to Arcore by bus and train, so no matter how you choose to travel in Milan and Lombardy – you will always have plenty of easy options.

Related Routes

Alternative route from San Giuliano Milanese to Arcore by bus and train via E060, S1 and S8

To get from San Giuliano Milanese to Arcore in Milan and Lombardy, you’ll need to take one bus line and 2 train lines: take the E060 bus from San Giuliano Milanese SS 9 Via Emilia /Tolstoj station to Melegnano-Vle Repubblica/Via Per Carpiano station. Next, you’ll have to switch to the S1 train and finally take the S8 train from Milano Porta Garibaldi station to Arcore station. The total trip duration for this route is approximately 1 hr 33 min.

93min
Bus - E060E060
Train - S1
Train - S8
Walk to Arcore
Leaves from San Giuliano Milanese SS 9 Via Emilia /Tolstoj

Step by Step

  • 1
    Start from bus station
    Start from bus station
    San Giuliano Milanese
  • 2
    Bus - E060E060
    Wait for bus
    E060
    Sant'Angelo Lodigiano-Ospedale
  • 3
    Ride to bus station
    Ride to bus station
    Melegnano-Vle Repubblica/Via Per Carpiano
    ID mg3004
    9 min
  • 4
    Walk to train station
    Walk to train station
    Melegnano
    110 m • 2 min
  • 5
    Train - S1
    Wait for train
    S1
    Saronno
  • 6
    Ride to train station
    Ride to train station
    Milano Porta Garibaldi (Passante)
    36 min
  • 7
    Walk to train station
    Walk to train station
    Milano Porta Garibaldi
    20 m • 1 min
  • 8
    Train - S8
    Wait for train
    S8
    Lecco
  • 9
    Ride to train station
    Ride to train station
    Arcore
    21 min
  • 10
    Walk to Arcore
    Walk to
    Arcore
    710 m • 10 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from San Giuliano Milanese to Arcore?

    The fastest way takes 95 minutes, using Bus line E038, Train line S1, Train line S8.

  • What is the alternative route to get from San Giuliano Milanese to Arcore?

    The alternative route takes 93 minutes, using Bus line E060, Train line S1, Train line S8.

  • Is there a direct bus between San Giuliano Milanese and Arcore in Milan and Lombardy?

    No, you’ll have to take one bus line and 2 train lines in total. The total travelling time is 1 hr 35 min.

  • Which bus line goes from San Giuliano Milanese to Arcore in Milan and Lombardy?

    The E038 bus line goes from Via Emilia Via Tolstoi (S. Giuliano) station near San Giuliano Milanese to Milano M3-Corsia1 Stallo1 station. From there you’ll have to take 2 train lines till Milano M3-Corsia1 Stallo1 station near Arcore in Milan and Lombardy.

  • How long does it take to travel from San Giuliano Milanese to Arcore in Milan and Lombardy by bus and train?

    The total travel time between San Giuliano Milanese and Arcore in Milan and Lombardy by bus and train is about 1 hr 35 min.

  • Where do I get on the bus near San Giuliano Milanese to get to Arcore in Milan and Lombardy?

    Get on the E038 bus from the Via Emilia Via Tolstoi (S. Giuliano) stop near San Giuliano Milanese in Milan and Lombardy.

  • Where do I get off the bus when travelling between San Giuliano Milanese and Arcore in Milan and Lombardy?

    Get off the bus at the Milano M3-Corsia1 Stallo1 station, which is closest to Arcore in Milan and Lombardy.

Popular Routes