Skip to main content

How to get from Danville to Buffalo by bus and train?

Danville to Buffalo - Bus Schedule

The 1 bus from Danville to Buffalo runs from 6:40 AM to 5:45 PM, with departures every 1 hr 20 min-2 hr 35 min. The trip takes about 17 hr 8 min, with regular service throughout the operating hours.

From Danville to Buffalo by bus and train

To get from Danville to Buffalo in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and 2 train lines: take the 1 bus from Danville Transit System Hub station to Craghead & Deboe station. Next, you’ll have to switch to the CRESCENT train, then the ACELA train and finally take the FLIXBUS N2685 bus from Newark (Nj) station to Buffalo station. The total trip duration for this route is approximately 17 hr 8 min. The bus and train schedule from Danville may change. We recommend you check the updated bus and train schedule to Buffalo on the Moovit app.

1028min
Bus - 11
Train - CRESCENTCRESCENT
Train - ACELAACELA
Bus - FLIXBUS N2685FLIXBUS N2685
Walk to Buffalo
Leaves from Danville Transit System Hub

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Danville
  • 2
    Bus - 11
    Wait for bus
    1
    Kemper Road - Dcc
  • 3
    Ride to bus station
    Ride to bus station
    Craghead & Deboe
    3 min
  • 4
    Walk to train station
    Walk to train station
    Danville Amtrak Station
    ID DAN
    170 yd • 2 min
  • 5
    Train - CRESCENTCRESCENT
    Wait for train
    CRESCENT
    New York
  • 6
    Ride to train station
    Ride to train station
    Washington Union Station
    ID WAS
    319 min
  • 7
    Train - ACELAACELA
    Wait for train
    ACELA
    New York
  • 8
    Ride to train station
    Ride to train station
    Newark
    ID NWK
    162 min
  • 9
    Walk to bus station
    Walk to bus station
    Newark (Nj)
    ID NWK6
    50 yd • 1 min
  • 10
    Bus - FLIXBUS N2685FLIXBUS N2685
    Wait for bus
    FLIXBUS N2685
    Toronto (Union Station Bus Terminal)
  • 11
    Ride to bus station
    Ride to bus station
    Buffalo
    ID BUF
    495 min
  • 12
    Walk to Buffalo
    Walk to
    Buffalo
    620 yd • 8 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Danville to Buffalo

The distance between Danville, Washington, D.C. - Baltimore, MD and Buffalo, Washington, D.C. - Baltimore, MD is approximately 809.83 mi, which can typically be traveled in 1028 min. Moovit will show you the directions from Danville to Buffalo by bus and train, so no matter how you choose to travel in Washington, D.C. - Baltimore, MD – you will always have plenty of easy options.

Bus And Train schedule from Danville to Buffalo

To check the bus and train schedule from Danville to Buffalo using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Danville) and destination (Buffalo), then select the desired date and time of travel. Moovit will show all available bus and train routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and train, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and train schedules.

Questions & Answers

  • What is the fastest way to get from Danville to Buffalo?

    The fastest way takes 1028 minutes, using bus line 1, train line CRESCENT, train line ACELA, bus line FLIXBUS N2685.

  • Is there a direct bus between Danville and Buffalo in Washington, D.C. - Baltimore, MD?

    No, you’ll have to take 2 bus lines and 2 train lines in total. The total traveling time is 17 hr 8 min.

  • Which bus line goes from Danville to Buffalo in Washington, D.C. - Baltimore, MD?

    The 1 bus line goes from Craghead & Deboe station near Danville to Danville Amtrak Station. From there you’ll have to take one bus line and 2 train lines till Danville Amtrak Station near Buffalo in Washington, D.C. - Baltimore, MD.

  • How long does it take to travel from Danville to Buffalo in Washington, D.C. - Baltimore, MD by bus and train?

    The total travel time between Danville and Buffalo in Washington, D.C. - Baltimore, MD by bus and train is about 17 hr 8 min.

  • Where do I get on the bus near Danville to get to Buffalo in Washington, D.C. - Baltimore, MD?

    Get on the 1 bus from the Craghead & Deboe stop near Danville in Washington, D.C. - Baltimore, MD.

  • Where do I get off the bus when traveling between Danville and Buffalo in Washington, D.C. - Baltimore, MD?

    Get off the bus at the Danville Amtrak Station, which is closest to Buffalo in Washington, D.C. - Baltimore, MD.