How to get from Clarksville Park & Ride to Clinton, MD by bus and metro?

From Clarksville Park & Ride to Clinton, MD by bus and metro

To get from Clarksville Park & Ride to Clinton, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the 335 bus from Clarksville Park & Ride station to Sw 7th St & Sw Independence Av station. Next, you’ll have to switch to the GREEN metro and finally take the P84 bus from Branch Ave Station + Bus Bay E station to Brandywine Road at Opp. Horseshoe Road station. The total trip duration for this route is approximately 2 hr 18 min. The ride fare is $3.00.

138min$3.00
Bus - 335335
Metro - GREEN
Bus - P84P84
Walk to Clinton, MD
Leaves from Clarksville Park & Ride

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Clarksville Park & Ride
  • 2
    Bus - 335335
    Wait for bus
    335
    335/1 Washington Dc
  • 3
    Ride to bus station
    Ride to bus station
    Sw 7th St & Sw Independence Av
    59 min
  • 4
    Walk to metro station
    Walk to metro station
    L'Enfant Plaza
    270 yd • 4 min
  • 5
    Metro - GREENGREEN
    Wait for metro
    GREEN
    Branch Ave
  • 6
    Ride to metro station
    Ride to metro station
    Branch Avenue
    20 min
  • 7
    Walk to bus station
    Walk to bus station
    Branch Ave Station + Bus Bay E
    ID 3003290
    90 yd • 2 min
  • 8
    Bus - P84P84
    Wait for bus
    P84
    Brandywine Crossing Shopping Center
  • 9
    Ride to bus station
    Ride to bus station
    Brandywine Road at Opp. Horseshoe Road
    ID 33353
    21 min
  • 10
    Walk to Clinton, MD
    Walk to
    Clinton, MD
    200 yd • 3 min
*Duration based on 8am traffic

Alternative route from Clarksville Park & Ride to Clinton, MD by bus and metro via 335, GREEN and P85

To get from Clarksville Park & Ride to Clinton, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the 335 bus from Clarksville Park & Ride station to Sw 7th St & Sw Independence Av station. Next, you’ll have to switch to the GREEN metro and finally take the P85 bus from Branch Ave Station + Bus Bay F station to Piscataway Road at Brandywine Road station. The total trip duration for this route is approximately 2 hr 29 min. The ride fare is $3.00.

149min$3.00
Bus - 335335
Metro - GREEN
Bus - P85P85
Walk to Clinton, MD
Leaves from Clarksville Park & Ride

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Clarksville Park & Ride
  • 2
    Bus - 335335
    Wait for bus
    335
    335/1 Washington Dc
  • 3
    Ride to bus station
    Ride to bus station
    Sw 7th St & Sw Independence Av
    59 min
  • 4
    Walk to metro station
    Walk to metro station
    L'Enfant Plaza
    270 yd • 4 min
  • 5
    Metro - GREENGREEN
    Wait for metro
    GREEN
    Branch Ave
  • 6
    Ride to metro station
    Ride to metro station
    Branch Avenue
    20 min
  • 7
    Walk to bus station
    Walk to bus station
    Branch Ave Station + Bus Bay F
    ID 3002631
    70 yd • 1 min
  • 8
    Bus - P85P85
    Wait for bus
    P85
    Southern Maryland Hospital
  • 9
    Ride to bus station
    Ride to bus station
    Piscataway Road at Brandywine Road
    ID 38060
    29 min
  • 10
    Walk to Clinton, MD
    Walk to
    Clinton, MD
    120 yd • 2 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Clarksville Park & Ride to Clinton, MD

The distance between Clarksville Park & Ride, Prince George's County and Clinton, MD, Prince George's County is approximately 54.21 mi, which can typically be travelled in 138 min. Moovit will show you the directions from Clarksville Park & Ride to Clinton, MD by bus and metro, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.

Public transit stations close to Clinton, MD, Prince George's County

Clinton, MD is located at Clinton, MD, Prince George's County and the nearest public transit station is Piscataway Road at Hardesty Drive.

Bus stations close to Clinton, MD:

  • Piscataway Road at Hardesty Drive
  • Piscataway Road at Gwynndale Drive
  • Piscataway Road at Absher Lane

Related Routes

Alternative route from Clarksville Park & Ride to Clinton, MD by bus and metro via 335, GREEN and P85

To get from Clarksville Park & Ride to Clinton, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the 335 bus from Clarksville Park & Ride station to Sw 7th St & Sw Independence Av station. Next, you’ll have to switch to the GREEN metro and finally take the P85 bus from Branch Ave Station + Bus Bay F station to Piscataway Road at Brandywine Road station. The total trip duration for this route is approximately 2 hr 29 min. The ride fare is $3.00.

149min$3.00
Bus - 335335
Metro - GREEN
Bus - P85P85
Walk to Clinton, MD
Leaves from Clarksville Park & Ride

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Clarksville Park & Ride
  • 2
    Bus - 335335
    Wait for bus
    335
    335/1 Washington Dc
  • 3
    Ride to bus station
    Ride to bus station
    Sw 7th St & Sw Independence Av
    59 min
  • 4
    Walk to metro station
    Walk to metro station
    L'Enfant Plaza
    270 yd • 4 min
  • 5
    Metro - GREENGREEN
    Wait for metro
    GREEN
    Branch Ave
  • 6
    Ride to metro station
    Ride to metro station
    Branch Avenue
    20 min
  • 7
    Walk to bus station
    Walk to bus station
    Branch Ave Station + Bus Bay F
    ID 3002631
    70 yd • 1 min
  • 8
    Bus - P85P85
    Wait for bus
    P85
    Southern Maryland Hospital
  • 9
    Ride to bus station
    Ride to bus station
    Piscataway Road at Brandywine Road
    ID 38060
    29 min
  • 10
    Walk to Clinton, MD
    Walk to
    Clinton, MD
    120 yd • 2 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Clarksville Park & Ride to Clinton, MD?

    The fastest way takes 138 minutes, using Bus line 335, Metro line GREEN, Bus line P84.

  • What is the alternative route to get from Clarksville Park & Ride to Clinton, MD?

    The alternative route takes 149 minutes, using Bus line 335, Metro line GREEN, Bus line P85.

  • Is there a direct bus between Clarksville Park & Ride and Clinton, MD?

    No, you’ll have to take 2 bus lines and one metro line in total. The total travelling time is 2 hr 18 min.

  • Which bus line goes from Clarksville Park & Ride to Clinton, MD?

    The 335 bus line goes from 335/1 Washington Dc station near Clarksville Park & Ride in Howard County to Sw 7th St & Sw Independence Av station. From there you’ll have to take one bus line and one metro line till Sw 7th St & Sw Independence Av station near Clinton, MD in Prince George's County.

  • How long does it take to travel from Clarksville Park & Ride to Clinton, MD by bus and metro?

    The total travel time between Clarksville Park & Ride in Howard County and Clinton, MD in Prince George's County by bus and metro is about 2 hr 18 min.

  • Where do I get on the bus near Clarksville Park & Ride to get to Clinton, MD?

    Get on the 335 bus from the 335/1 Washington Dc stop near Clarksville Park & Ride in Howard County.

  • Where do I get off the bus when travelling between Clarksville Park & Ride and Clinton, MD?

    Get off the bus at the Sw 7th St & Sw Independence Av stop, which is closest to Clinton, MD in Prince George's County.

  • How much is the total bus and metro fare from Clarksville Park & Ride to Clinton, MD?

    The ride from Clarksville Park & Ride to Clinton, MD costs $3.00.

Popular Routes