How to get from Wilson Blvd @ N Kent St to Clinton, MD by bus and metro?

From Wilson Blvd @ N Kent St to Clinton, MD by bus and metro

To get from Wilson Blvd @ N Kent St to Clinton, MD in Prince George's County, you’ll need to take 2 metro lines and one bus line: take the BLUE metro from Rosslyn Metro Station station to L'Enfant Plaza station. Next, you’ll have to switch to the GREEN metro and finally take the P84 bus from Branch Ave Station + Bus Bay E station to Brandywine Road at Opp. Horseshoe Road station. The total trip duration for this route is approximately 1 hr 23 min. The ride fare is $3.40.

83min$3.40
Walk to metro station
Metro - BLUE
Metro - GREEN
Bus - P84P84
Walk to Clinton, MD
Leaves from Rosslyn Metro Station

Step by Step

  • 1
    Walk to metro station
    Walk to metro station
    Rosslyn Metro Station
    230 yd • 3 min
  • 2
    Metro - BLUEBLUE
    Wait for metro
    BLUE
    Largo
  • 3
    Ride to metro station
    Ride to metro station
    L'Enfant Plaza
    11 min
  • 4
    Metro - GREENGREEN
    Wait for metro
    GREEN
    Branch Ave
  • 5
    Ride to metro station
    Ride to metro station
    Branch Avenue
    20 min
  • 6
    Walk to bus station
    Walk to bus station
    Branch Ave Station + Bus Bay E
    ID 3003290
    90 yd • 2 min
  • 7
    Bus - P84P84
    Wait for bus
    P84
    Brandywine Crossing Shopping Center
  • 8
    Ride to bus station
    Ride to bus station
    Brandywine Road at Opp. Horseshoe Road
    ID 33353
    21 min
  • 9
    Walk to Clinton, MD
    Walk to
    Clinton, MD
    200 yd • 3 min
*Duration based on 8am traffic

Alternative route from Wilson Blvd @ N Kent St to Clinton, MD by bus and metro via SILVER, GREEN and P85

To get from Wilson Blvd @ N Kent St to Clinton, MD in Prince George's County, you’ll need to take 2 metro lines and one bus line: take the SILVER metro from Rosslyn Metro Station station to L'Enfant Plaza station. Next, you’ll have to switch to the GREEN metro and finally take the P85 bus from Branch Ave Station + Bus Bay F station to Piscataway Road at Brandywine Road station. The total trip duration for this route is approximately 1 hr 20 min. The ride fare is $3.40.

80min$3.40
Walk to metro station
Metro - SILVER
Metro - GREEN
Bus - P85P85
Walk to Clinton, MD
Leaves from Rosslyn Metro Station

Step by Step

  • 1
    Walk to metro station
    Walk to metro station
    Rosslyn Metro Station
    230 yd • 3 min
  • 2
    Metro - SILVERSILVER
    Wait for metro
    SILVER
    Largo
  • 3
    Ride to metro station
    Ride to metro station
    L'Enfant Plaza
    11 min
  • 4
    Metro - GREENGREEN
    Wait for metro
    GREEN
    Branch Ave
  • 5
    Ride to metro station
    Ride to metro station
    Branch Avenue
    20 min
  • 6
    Walk to bus station
    Walk to bus station
    Branch Ave Station + Bus Bay F
    ID 3002631
    70 yd • 1 min
  • 7
    Bus - P85P85
    Wait for bus
    P85
    Southern Maryland Hospital
  • 8
    Ride to bus station
    Ride to bus station
    Piscataway Road at Brandywine Road
    ID 38060
    29 min
  • 9
    Walk to Clinton, MD
    Walk to
    Clinton, MD
    120 yd • 2 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Wilson Blvd @ N Kent St to Clinton, MD

The distance between Wilson Blvd @ N Kent St, Prince George's County and Clinton, MD, Prince George's County is approximately 20.75 mi, which can typically be travelled in 83 min. Moovit will show you the directions from Wilson Blvd @ N Kent St to Clinton, MD by bus and metro, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.

Public transit stations close to Wilson Blvd @ N Kent St

Wilson Blvd @ N Kent St is located at Wilson Blvd @ N Kent St, Prince George's County and the nearest public transit station is N Moore St & Rosslyn Station.

Metro stations close to Wilson Blvd @ N Kent St:

  • Clarendon
  • Court House Metro Station
  • Foggy Bottom Gwu Kennedy Center Metro Station

Bus stations close to Wilson Blvd @ N Kent St:

  • N Moore St & Rosslyn Station
  • N Moore St Sb at Rosslyn Station Bay A
  • Rosslyn+Bay C

Public transit stations close to Clinton, MD, Prince George's County

Clinton, MD is located at Clinton, MD, Prince George's County and the nearest public transit station is Piscataway Road at Gwynndale Drive.

Bus stations close to Clinton, MD:

  • Piscataway Road at Gwynndale Drive
  • Piscataway Road at Hardesty Drive
  • Piscataway Road at Brandywine Road

Related Routes

Alternative route from Wilson Blvd @ N Kent St to Clinton, MD by bus and metro via SILVER, GREEN and P85

To get from Wilson Blvd @ N Kent St to Clinton, MD in Prince George's County, you’ll need to take 2 metro lines and one bus line: take the SILVER metro from Rosslyn Metro Station station to L'Enfant Plaza station. Next, you’ll have to switch to the GREEN metro and finally take the P85 bus from Branch Ave Station + Bus Bay F station to Piscataway Road at Brandywine Road station. The total trip duration for this route is approximately 1 hr 20 min. The ride fare is $3.40.

80min$3.40
Walk to metro station
Metro - SILVER
Metro - GREEN
Bus - P85P85
Walk to Clinton, MD
Leaves from Rosslyn Metro Station

Step by Step

  • 1
    Walk to metro station
    Walk to metro station
    Rosslyn Metro Station
    230 yd • 3 min
  • 2
    Metro - SILVERSILVER
    Wait for metro
    SILVER
    Largo
  • 3
    Ride to metro station
    Ride to metro station
    L'Enfant Plaza
    11 min
  • 4
    Metro - GREENGREEN
    Wait for metro
    GREEN
    Branch Ave
  • 5
    Ride to metro station
    Ride to metro station
    Branch Avenue
    20 min
  • 6
    Walk to bus station
    Walk to bus station
    Branch Ave Station + Bus Bay F
    ID 3002631
    70 yd • 1 min
  • 7
    Bus - P85P85
    Wait for bus
    P85
    Southern Maryland Hospital
  • 8
    Ride to bus station
    Ride to bus station
    Piscataway Road at Brandywine Road
    ID 38060
    29 min
  • 9
    Walk to Clinton, MD
    Walk to
    Clinton, MD
    120 yd • 2 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Wilson Blvd @ N Kent St to Clinton, MD?

    The fastest way takes 83 minutes, using Metro line BLUE, Metro line GREEN, Bus line P84.

  • What is the alternative route to get from Wilson Blvd @ N Kent St to Clinton, MD?

    The alternative route takes 80 minutes, using Metro line SILVER, Metro line GREEN, Bus line P85.

  • Is there a direct metro between Wilson Blvd @ N Kent St and Clinton, MD?

    No, you’ll have to take 2 metro lines and one bus line in total. The total travelling time is 1 hr 23 min.

  • Which metro line goes from Wilson Blvd @ N Kent St to Clinton, MD?

    The BLUE metro line goes from Rosslyn Metro Station station near Wilson Blvd @ N Kent St in Arlington County to Largo station. From there you’ll have to take one metro line and one bus line till Largo station near Clinton, MD in Prince George's County.

  • How long does it take to travel from Wilson Blvd @ N Kent St to Clinton, MD by metro and bus?

    The total travel time between Wilson Blvd @ N Kent St in Arlington County and Clinton, MD in Prince George's County by metro and bus is about 1 hr 23 min.

  • Where do I get on the metro near Wilson Blvd @ N Kent St to get to Clinton, MD?

    Get on the BLUE metro from the Rosslyn Metro Station station near Wilson Blvd @ N Kent St in Arlington County.

  • Where do I get off the metro when travelling between Wilson Blvd @ N Kent St and Clinton, MD?

    Get off the metro at the Largo stop, which is closest to Clinton, MD in Prince George's County.

  • How much is the total metro and bus fare from Wilson Blvd @ N Kent St to Clinton, MD?

    The ride from Wilson Blvd @ N Kent St to Clinton, MD costs $3.40.

Popular Routes