The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app
How to get from Riggs Rd+University Bl to Clinton, MD by bus and metro?
Riggs Rd+University Bl to Clinton, MD - Bus Schedule
The M12 bus from Riggs Rd+University Bl to Clinton, MD usually operates 24 hours a day, 7 days a week, running every 10 min-2 hr 15 min. The trip takes about 1 hr 38 min, with regular service throughout the operating hours.
From Riggs Rd+University Bl to Clinton, MD by bus and metro
To get from Riggs Rd+University Bl to Clinton, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the M12 bus from Riggs Rd+University Bl station to Pg Plaza Station station. Next, you’ll have to switch to the GREEN metro and finally take the P85 bus from Branch Ave Station + Bus Bay F station to Piscataway Rd at Brandywine Rd station. The total trip duration for this route is approximately 1 hr 38 min. The ride fare is $3.25. The bus and metro schedule from Riggs Rd+University Bl may change. We recommend you check the updated bus and metro schedule to Clinton, MD on the Moovit app.
98min$3.25
M12
P85
Leaves from Riggs Rd+University Bl
Step by Step
- 1
Start from bus stationRiggs Rd+University Bl - 2M12Wait for busM12East To Hyattsville Xing
- 3
Ride to bus stationPg Plaza Station14 min - 4Walk to metro stationHyattsville Crossing Metro Station20 yd • 1 min
- 5GREENWait for metroGREENBranch Av
- 6Ride to metro stationBranch Avenue41 min
- 7Walk to bus stationBranch Ave Station + Bus Bay FID 300263180 yd • 2 min
- 8P85Wait for busP85Southern Maryland Hospital
- 9Ride to bus stationPiscataway Rd at Brandywine RdID 3806030 min
- 10Walk toClinton, MD120 yd • 2 min
*Duration based on 8am traffic
Public transit directions from Riggs Rd+University Bl to Clinton, MD
The distance between Riggs Rd+University Bl, Prince George's County and Clinton, MD, Prince George's County is approximately 29.65 mi, which can typically be travelled in 98 min. Moovit will show you the directions from Riggs Rd+University Bl to Clinton, MD by bus and metro, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.
Bus And Metro schedule from Riggs Rd+University Bl to Clinton, MD
To check the bus and metro schedule from Riggs Rd+University Bl to Clinton, MD using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Riggs Rd+University Bl) and destination (Clinton, MD), then select the desired date and time of travel. Moovit will show all available bus and metro routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and metro, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and metro schedules.
Related Routes
- Harry S Truman P & R to Clinton, MD
- Shady Grove Station & Bay F to Clinton, MD
- North Bethesda Station & Bay D to Clinton, MD
- 3 - Mary Washington Hospital (Main Entrance) to Clinton, MD
- 402 - Stafford Marketplace (T.J. Maxx) to Clinton, MD
- 234 Commuter Lot Crosswalk to Clinton, MD
- Manassas Dr @ Signal View Dr to Clinton, MD
- Dale Blvd @ Minnieville Rd to Clinton, MD
- Old Bridge Rd @ Oakwood Dr to Clinton, MD
- Route 1 @ Prince William Pkwy to Clinton, MD
- Route 1 @ Dawson Beach Rd to Clinton, MD
- 2200 Opitz Blvd to Clinton, MD
- Center St @ Church St to Clinton, MD
- Dale Blvd @ Kirkdale Dr to Clinton, MD
- Route 234 Commuter Lot Bus Bay to Clinton, MD
- Opitz Blvd @ Daniel Stuart Sq to Clinton, MD
- I St @ 18th St NW to Clinton, MD
- 18th St @ F St NW to Clinton, MD
- H St NW @ Jackson Pl NW to Clinton, MD
- 14th St @ Constitution Ave NW to Clinton, MD
Questions & Answers
What is the fastest way to get from Riggs Rd+University Bl to Clinton, MD?
The fastest way takes 98 minutes, using Bus line M12, Metro line GREEN, Bus line P85.
Is there a direct bus between Riggs Rd+University Bl and Clinton, MD in Prince George's County?
No, you’ll have to take 2 bus lines and one metro line in total. The total travelling time is 1 hr 38 min.
Which bus line goes from Riggs Rd+University Bl to Clinton, MD in Prince George's County?
The M12 bus line goes from Pg Plaza Station near Riggs Rd+University Bl to Hyattsville Crossing Metro Station. From there you’ll have to take one bus line and one metro line till Hyattsville Crossing Metro Station near Clinton, MD in Prince George's County.
How long does it take to travel from Riggs Rd+University Bl to Clinton, MD in Prince George's County by bus and metro?
The total travel time between Riggs Rd+University Bl and Clinton, MD in Prince George's County by bus and metro is about 1 hr 38 min.
Where do I get on the bus near Riggs Rd+University Bl to get to Clinton, MD in Prince George's County?
Get on the M12 bus from the Pg Plaza Station near Riggs Rd+University Bl in Prince George's County.
Where do I get off the bus when travelling between Riggs Rd+University Bl and Clinton, MD in Prince George's County?
Get off the bus at the Hyattsville Crossing Metro Station, which is closest to Clinton, MD in Prince George's County.
How much is the total bus and metro fare from Riggs Rd+University Bl to Clinton, MD?
The ride from Riggs Rd+University Bl to Clinton, MD costs $3.25.
Popular Routes
- Quantico to Langley Park
- Montgomery County to Annapolis
- Washington Dulles International Airport (Iad) to National Mall
- Dumfries to Fort Meade
- Tenleytown Metro Station to Greenbelt
- Catonsville to Aberdeen
- Greenbelt to University Of Maryland Baltimore (Umbc)
- Rockville to College Park
- Downtown Largo Metro Station to Ashburn
- Langley Park to Wheaton
- Baltimore Penn Station to Bowie
- Tysons Corner Metro to Foggy Bottom
- Somerset to Wicomico County
- Bethesda Station to Oriole Park At Camden Yards
- Frederick to College Park–University Of Maryland
- Washington to Solomons
- Silver Spring to Bethesda
- Arbutus to Fairland
- Waldorf to Brandywine
- Washington to Saint Mary's County