How to get from Riggs Rd Ne+Nicholson St NE to Clinton, MD by bus and metro?

Riggs Rd Ne+Nicholson St NE to Clinton, MD - Bus Schedule

The P15 bus from Riggs Rd Ne+Nicholson St NE to Clinton, MD runs from 4:55 AM to 9:40 AM, with departures every 20-25 min. The trip takes about 1 hr 22 min, with regular service throughout the operating hours.

From Riggs Rd Ne+Nicholson St NE to Clinton, MD by bus and metro

To get from Riggs Rd Ne+Nicholson St NE to Clinton, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the P15 bus from Riggs Rd Ne+Nicholson St NE station to Fort Totten+Bay D station. Next, you’ll have to switch to the GREEN metro and finally take the P84 bus from Branch Ave Station + Bus Bay E station to Brandywine Rd at Opp. Horseshoe Rd station. The total trip duration for this route is approximately 1 hr 22 min. The ride fare is $3.25. The bus and metro schedule from Riggs Rd Ne+Nicholson St NE may change. We recommend you check the updated bus and metro schedule to Clinton, MD on the Moovit app.

82min$3.25
Bus - P15P15
Metro - GREEN
Bus - P84P84
Walk to Clinton, MD
Leaves from Riggs Rd Ne+Nicholson St NE

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Riggs Rd Ne+Nicholson St NE
  • 2
    Bus - P15P15
    Wait for bus
    P15
    South To Fort Totten
  • 3
    Ride to bus station
    Ride to bus station
    Fort Totten+Bay D
    ID 1003237
    5 min
  • 4
    Walk to metro station
    Walk to metro station
    Fort Totten
    60 yd • 1 min
  • 5
    Metro - GREENGREEN
    Wait for metro
    GREEN
    Branch Av
  • 6
    Ride to metro station
    Ride to metro station
    Branch Avenue
    35 min
  • 7
    Walk to bus station
    Walk to bus station
    Branch Ave Station + Bus Bay E
    ID 3003290
    100 yd • 2 min
  • 8
    Bus - P84P84
    Wait for bus
    P84
    Brandywine Crossing Shopping Center
  • 9
    Ride to bus station
    Ride to bus station
    Brandywine Rd at Opp. Horseshoe Rd
    ID 33353
    21 min
  • 10
    Walk to Clinton, MD
    Walk to
    Clinton, MD
    200 yd • 3 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Riggs Rd Ne+Nicholson St NE to Clinton, MD

The distance between Riggs Rd Ne+Nicholson St NE, Prince George's County and Clinton, MD, Prince George's County is approximately 23.56 mi, which can typically be traveled in 82 min. Moovit will show you the directions from Riggs Rd Ne+Nicholson St NE to Clinton, MD by bus and metro, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.

Bus And Metro schedule from Riggs Rd Ne+Nicholson St NE to Clinton, MD

To check the bus and metro schedule from Riggs Rd Ne+Nicholson St NE to Clinton, MD using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Riggs Rd Ne+Nicholson St NE) and destination (Clinton, MD), then select the desired date and time of travel. Moovit will show all available bus and metro routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and metro, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and metro schedules.

Related Routes

Questions & Answers

  • What is the fastest way to get from Riggs Rd Ne+Nicholson St NE to Clinton, MD?

    The fastest way takes 82 minutes, using Bus line P15, Metro line GREEN, Bus line P84.

  • Is there a direct bus between Riggs Rd Ne+Nicholson St NE and Clinton, MD?

    No, you’ll have to take 2 bus lines and one metro line in total. The total traveling time is 1 hr 22 min.

  • Which bus line goes from Riggs Rd Ne+Nicholson St NE to Clinton, MD?

    The P15 bus line goes from Fort Totten+Bay D station near Riggs Rd Ne+Nicholson St NE in Washington to Fort Totten station. From there you’ll have to take one bus line and one metro line till Fort Totten station near Clinton, MD in Prince George's County.

  • How long does it take to travel from Riggs Rd Ne+Nicholson St NE to Clinton, MD by bus and metro?

    The total travel time between Riggs Rd Ne+Nicholson St NE in Washington and Clinton, MD in Prince George's County by bus and metro is about 1 hr 22 min.

  • Where do I get on the bus near Riggs Rd Ne+Nicholson St NE to get to Clinton, MD?

    Get on the P15 bus from the Fort Totten+Bay D stop near Riggs Rd Ne+Nicholson St NE in Washington.

  • Where do I get off the bus when traveling between Riggs Rd Ne+Nicholson St NE and Clinton, MD?

    Get off the bus at the Fort Totten stop, which is closest to Clinton, MD in Prince George's County.

  • How much is the total bus and metro fare from Riggs Rd Ne+Nicholson St NE to Clinton, MD?

    The ride from Riggs Rd Ne+Nicholson St NE to Clinton, MD costs $3.25.

Popular Routes