The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app
How to get from Morris Rd Se+16 St SE to Clinton, MD by bus and metro?
From Morris Rd Se+16 St SE to Clinton, MD by bus and metro
To get from Morris Rd Se+16 St SE to Clinton, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the C29 bus from Morris Rd Se+16 St SE station to Anacostia Station & Bus Bay A, B, C, D station. Next, you’ll have to switch to the GREEN metro and finally take the P85 bus from Branch Ave Station + Bus Bay F station to Piscataway Road at Brandywine Road station. The total trip duration for this route is approximately 1 hr 14 min. The ride fare is $2.00. The bus and metro schedule from Morris Rd Se+16 St SE may change. We recommend you check the updated bus and metro schedule to Clinton, MD on the Moovit app.
74min$2.00
C29
P85
Leaves from Morris Rd Se+16 St SE
Step by Step
- 1
Start from bus stationMorris Rd Se+16 St SE - 2C29Wait for busC29North To Anacostia
- 3
Ride to bus stationAnacostia Station & Bus Bay A, B, C, D6 min - 4Walk to metro stationAnacostia Metro Station60 yd • 1 min
- 5GREENWait for metroGREENBranch Av
- 6Ride to metro stationBranch Avenue14 min
- 7Walk to bus stationBranch Ave Station + Bus Bay FID 300263180 yd • 2 min
- 8P85Wait for busP85Southern Maryland Hospital
- 9Ride to bus stationPiscataway Road at Brandywine RoadID 3806029 min
- 10Walk toClinton, MD120 yd • 2 min
*Duration based on 8am traffic
Public transit directions from Morris Rd Se+16 St SE to Clinton, MD
The distance between Morris Rd Se+16 St SE, Prince George's County and Clinton, MD, Prince George's County is approximately 16.19 mi, which can typically be travelled in 74 min. Moovit will show you the directions from Morris Rd Se+16 St SE to Clinton, MD by bus and metro, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.
Bus And Metro schedule from Morris Rd Se+16 St SE to Clinton, MD
To check the bus and metro schedule from Morris Rd Se+16 St SE to Clinton, MD using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Morris Rd Se+16 St SE) and destination (Clinton, MD), then select the desired date and time of travel. Moovit will show all available bus and metro routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and metro, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and metro schedules.
Related Routes
- Harry S Truman P & R to Clinton, MD
- Shady Grove Station & Bay F to Clinton, MD
- North Bethesda Station & Bay D to Clinton, MD
- 3 - Mary Washington Hospital (Main Entrance) to Clinton, MD
- 402 - Stafford Marketplace (T.J. Maxx) to Clinton, MD
- 234 Commuter Lot Crosswalk to Clinton, MD
- Manassas Dr @ Signal View Dr to Clinton, MD
- Dale Blvd @ Minnieville Rd to Clinton, MD
- Old Bridge Rd @ Oakwood Dr to Clinton, MD
- Route 1 @ Prince William Pkwy to Clinton, MD
- Route 1 @ Dawson Beach Rd to Clinton, MD
- 2200 Opitz Blvd to Clinton, MD
- Center St @ Church St to Clinton, MD
- Dale Blvd @ Kirkdale Dr to Clinton, MD
- Route 234 Commuter Lot Bus Bay to Clinton, MD
- Opitz Blvd @ Daniel Stuart Sq to Clinton, MD
- I St @ 18th St NW to Clinton, MD
- 18th St @ F St NW to Clinton, MD
- H St NW @ Jackson Pl NW to Clinton, MD
- 14th St @ Constitution Ave NW to Clinton, MD
Questions & Answers
What is the fastest way to get from Morris Rd Se+16 St SE to Clinton, MD?
The fastest way takes 74 minutes, using Bus line C29, Metro line GREEN, Bus line P85.
Is there a direct bus between Morris Rd Se+16 St SE and Clinton, MD?
No, you’ll have to take 2 bus lines and one metro line in total. The total travelling time is 1 hr 14 min.
Which bus line goes from Morris Rd Se+16 St SE to Clinton, MD?
The C29 bus line goes from Anacostia Station & Bus Bay A, B, C, D station near Morris Rd Se+16 St SE in Washington to Anacostia Metro Station station. From there you’ll have to take one bus line and one metro line till Anacostia Metro Station station near Clinton, MD in Prince George's County.
How long does it take to travel from Morris Rd Se+16 St SE to Clinton, MD by bus and metro?
The total travel time between Morris Rd Se+16 St SE in Washington and Clinton, MD in Prince George's County by bus and metro is about 1 hr 14 min.
Where do I get on the bus near Morris Rd Se+16 St SE to get to Clinton, MD?
Get on the C29 bus from the Anacostia Station & Bus Bay A, B, C, D stop near Morris Rd Se+16 St SE in Washington.
Where do I get off the bus when travelling between Morris Rd Se+16 St SE and Clinton, MD?
Get off the bus at the Anacostia Metro Station stop, which is closest to Clinton, MD in Prince George's County.
How much is the total bus and metro fare from Morris Rd Se+16 St SE to Clinton, MD?
The ride from Morris Rd Se+16 St SE to Clinton, MD costs $2.00.
Popular Routes
- Smithsonian Metrorail to Andrews Afb
- Suitland to Laurel
- Greenbelt to Laurel
- Bethesda to Union Station
- College Park–University Of Maryland to Georgetown University Law Center
- Clarendon Metrorail Station to West Falls Church
- Wheaton to Langley Park
- Silver Spring to Georgetown University Law Center
- New Carrollton to Dulles Town Center
- Camden Station to Odenton, MD
- Bel Air to Washington
- Smithsonian Metrorail to Odenton, MD
- Springfield to Alexandria
- Medical Center Metro to Ronald Reagan Washington National Airport
- Manassas Park to Arlington
- Falls Church to Rockville
- Oriole Park At Camden Yards to The Mills at Owings Mills
- Hyattsville to Bethesda
- Washington Dulles International Airport (Iad) to Odenton
- Washington Dulles International Airport (Iad) to White House