How to get from Culpeper Amtrak to Clinton, MD by bus and train?

From Culpeper Amtrak to Clinton, MD by bus and train

To get from Culpeper Amtrak to Clinton, MD in Prince George's County, you’ll need to take one train line and 2 bus lines: take the NORTHEAST REGIONAL train from Culpeper Amtrak station to Union Station station. Next, you’ll have to switch to the 735 bus and finally take the 30 bus from Suitland Metrorail Station at Bus Bay D station to Piscataway Road at Brandywine Road station. The total trip duration for this route is approximately 4 hr 19 min.

259min
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - 735735
Bus - 3030
Walk to Clinton, MD
Leaves from Culpeper Amtrak

Step by Step

  • 1
    Start from train station
    Start from train station
    Culpeper Amtrak
  • 2
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    New York
  • 3
    Ride to train station
    Ride to train station
    Union Station
    96 min
  • 4
    Walk to bus station
    Walk to bus station
    Massachusetts Ave & Columbus Cir NE Eb
    ID 11562
    260 yd • 4 min
  • 5
    Bus - 735735
    Wait for bus
    735
    735/5 Charlotte Hall
  • 6
    Ride to bus station
    Ride to bus station
    Suitland Metro Station
    ID 11551
    40 min
  • 7
    Walk to bus station
    Walk to bus station
    Suitland Metrorail Station at Bus Bay D
    ID 34219
    200 yd • 3 min
  • 8
    Bus - 3030
    Wait for bus
    30
    Southern Maryland Hospital
  • 9
    Ride to bus station
    Ride to bus station
    Piscataway Road at Brandywine Road
    ID 38060
    40 min
  • 10
    Walk to Clinton, MD
    Walk to
    Clinton, MD
    120 yd • 2 min
*Duration based on 8am traffic

Alternative route from Culpeper Amtrak to Clinton, MD by bus and train via NORTHEAST REGIONAL, 735 and 36

To get from Culpeper Amtrak to Clinton, MD in Prince George's County, you’ll need to take one train line and 2 bus lines: take the NORTHEAST REGIONAL train from Culpeper Amtrak station to Union Station station. Next, you’ll have to switch to the 735 bus and finally take the 36 bus from Brandywine Road at Gwynn Park High School station to Brandywine Road at Horseshoe Road station. The total trip duration for this route is approximately 4 hr 36 min.

276min
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - 735735
Bus - 3636
Walk to Clinton, MD
Leaves from Culpeper Amtrak

Step by Step

  • 1
    Start from train station
    Start from train station
    Culpeper Amtrak
  • 2
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    New York
  • 3
    Ride to train station
    Ride to train station
    Union Station
    96 min
  • 4
    Walk to bus station
    Walk to bus station
    Massachusetts Ave & Columbus Cir NE Eb
    ID 11562
    260 yd • 4 min
  • 5
    Bus - 735735
    Wait for bus
    735
    735/5 Charlotte Hall
  • 6
    Ride to bus station
    Ride to bus station
    Brandywine Park & Ride
    ID 32503
    63 min
  • 7
    Walk to bus station
    Walk to bus station
    Brandywine Road at Gwynn Park High School
    ID 33362
    0.59 mi • 12 min
  • 8
    Bus - 3636
    Wait for bus
    36
    Clinton Fringe Parking Lot
  • 9
    Ride to bus station
    Ride to bus station
    Brandywine Road at Horseshoe Road
    ID 33465
    17 min
  • 10
    Walk to Clinton, MD
    Walk to
    Clinton, MD
    190 yd • 3 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Culpeper Amtrak to Clinton, MD

The distance between Culpeper Amtrak, Prince George's County and Clinton, MD, Prince George's County is approximately 87.99 mi, which can typically be travelled in 259 min. Moovit will show you the directions from Culpeper Amtrak to Clinton, MD by bus and train, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.

Public transit stations close to Culpeper Amtrak

Culpeper Amtrak is located at Culpeper Amtrak, Prince George's County and the nearest public transit station is Culpeper Station.

Bus stations close to Culpeper Amtrak:

  • Culpeper Station
  • Depot
  • Waters Place

Public transit stations close to Clinton, MD, Prince George's County

Clinton, MD is located at Clinton, MD, Prince George's County and the nearest public transit station is Piscataway Road at Absher Lane.

Bus stations close to Clinton, MD:

  • Piscataway Road at Absher Lane
  • Brandywine Road at Clinton Manor Drive
  • Piscataway Road at Hardesty Drive

Related Routes

Alternative route from Culpeper Amtrak to Clinton, MD by bus and train via NORTHEAST REGIONAL, 735 and 36

To get from Culpeper Amtrak to Clinton, MD in Prince George's County, you’ll need to take one train line and 2 bus lines: take the NORTHEAST REGIONAL train from Culpeper Amtrak station to Union Station station. Next, you’ll have to switch to the 735 bus and finally take the 36 bus from Brandywine Road at Gwynn Park High School station to Brandywine Road at Horseshoe Road station. The total trip duration for this route is approximately 4 hr 36 min.

276min
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - 735735
Bus - 3636
Walk to Clinton, MD
Leaves from Culpeper Amtrak

Step by Step

  • 1
    Start from train station
    Start from train station
    Culpeper Amtrak
  • 2
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    New York
  • 3
    Ride to train station
    Ride to train station
    Union Station
    96 min
  • 4
    Walk to bus station
    Walk to bus station
    Massachusetts Ave & Columbus Cir NE Eb
    ID 11562
    260 yd • 4 min
  • 5
    Bus - 735735
    Wait for bus
    735
    735/5 Charlotte Hall
  • 6
    Ride to bus station
    Ride to bus station
    Brandywine Park & Ride
    ID 32503
    63 min
  • 7
    Walk to bus station
    Walk to bus station
    Brandywine Road at Gwynn Park High School
    ID 33362
    0.59 mi • 12 min
  • 8
    Bus - 3636
    Wait for bus
    36
    Clinton Fringe Parking Lot
  • 9
    Ride to bus station
    Ride to bus station
    Brandywine Road at Horseshoe Road
    ID 33465
    17 min
  • 10
    Walk to Clinton, MD
    Walk to
    Clinton, MD
    190 yd • 3 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Culpeper Amtrak to Clinton, MD?

    The fastest way takes 259 minutes, using Bus line NORTHEAST REGIONAL, Bus line 735, Bus line 30.

  • What is the alternative route to get from Culpeper Amtrak to Clinton, MD?

    The alternative route takes 276 minutes, using Bus line NORTHEAST REGIONAL, Bus line 735, Bus line 36.

  • Is there a direct train between Culpeper Amtrak and Clinton, MD?

    No, you’ll have to take one train line and 2 bus lines in total. The total travelling time is 4 hr 19 min.

  • Which train line goes from Culpeper Amtrak to Clinton, MD?

    The NORTHEAST REGIONAL train line goes from New York station near Culpeper Amtrak in Culpeper County to Union Station station. From there you’ll have to take 2 bus lines till Union Station station near Clinton, MD in Prince George's County.

  • How long does it take to travel from Culpeper Amtrak to Clinton, MD by train and bus?

    The total travel time between Culpeper Amtrak in Culpeper County and Clinton, MD in Prince George's County by train and bus is about 4 hr 19 min.

  • Where do I get on the train near Culpeper Amtrak to get to Clinton, MD?

    Get on the NORTHEAST REGIONAL train from the New York station near Culpeper Amtrak in Culpeper County.

  • Where do I get off the train when travelling between Culpeper Amtrak and Clinton, MD?

    Get off the train at the Union Station stop, which is closest to Clinton, MD in Prince George's County.