The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app
How to get from Bethesda to Clinton, MD by bus and metro?
Bethesda to Clinton, MD - Metro Schedule
The RED metro from Bethesda to Clinton, MD runs from 5:17 AM to 11:48 PM, with departures every 5-10 min. The trip takes about 1 hr 23 min, with regular service throughout the operating hours.
From Bethesda to Clinton, MD by bus and metro
To get from Bethesda to Clinton, MD in Prince George's County, you’ll need to take 2 metro lines and one bus line: take the RED metro from Bethesda Metro Station station to Gallery Place-Chinatown station. Next, you’ll have to switch to the GREEN metro and finally take the P84 bus from Branch Ave Station + Bus Bay E station to Brandywine Rd at Opp. Horseshoe Rd station. The total trip duration for this route is approximately 1 hr 23 min. The ride fare is $5.20. The bus and metro schedule from Bethesda may change. We recommend you check the updated bus and metro schedule to Clinton, MD on the Moovit app.
83min$5.20
P84Leaves from Bethesda Metro Station
Step by Step
- 1Walk to metro stationBethesda Metro Station360 yd • 5 min
- 2REDWait for metroREDGlenmont
- 3
Ride to metro stationGallery Place-Chinatown18 min - 4GREENWait for metroGREENBranch Av
- 5Ride to metro stationBranch Avenue23 min
- 6Walk to bus stationBranch Ave Station + Bus Bay EID 3003290100 yd • 2 min
- 7P84Wait for busP84Brandywine Crossing Shopping Center
- 8Ride to bus stationBrandywine Rd at Opp. Horseshoe RdID 3335321 min
- 9Walk toClinton, MD200 yd • 3 min
*Duration based on 8am traffic
Public transit directions from Bethesda to Clinton, MD
The distance between Bethesda, Prince George's County and Clinton, MD, Prince George's County is approximately 25.9 mi, which can typically be traveled in 83 min. Moovit will show you the directions from Bethesda to Clinton, MD by bus and metro, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.
Bus And Metro schedule from Bethesda to Clinton, MD
To check the bus and metro schedule from Bethesda to Clinton, MD using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Bethesda) and destination (Clinton, MD), then select the desired date and time of travel. Moovit will show all available bus and metro routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and metro, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and metro schedules.
Related Routes
- Harry S Truman P & R to Clinton, MD
- Shady Grove Station & Bay F to Clinton, MD
- North Bethesda Station & Bay D to Clinton, MD
- 3 - Mary Washington Hospital (Main Entrance) to Clinton, MD
- 402 - Stafford Marketplace (T.J. Maxx) to Clinton, MD
- 234 Commuter Lot Crosswalk to Clinton, MD
- Manassas Dr @ Signal View Dr to Clinton, MD
- Dale Blvd @ Minnieville Rd to Clinton, MD
- Old Bridge Rd @ Oakwood Dr to Clinton, MD
- Route 1 @ Prince William Pkwy to Clinton, MD
- Route 1 @ Dawson Beach Rd to Clinton, MD
- 2200 Opitz Blvd to Clinton, MD
- Center St @ Church St to Clinton, MD
- Dale Blvd @ Kirkdale Dr to Clinton, MD
- Route 234 Commuter Lot Bus Bay to Clinton, MD
- Opitz Blvd @ Daniel Stuart Sq to Clinton, MD
- I St @ 18th St NW to Clinton, MD
- 18th St @ F St NW to Clinton, MD
- H St NW @ Jackson Pl NW to Clinton, MD
- 14th St @ Constitution Ave NW to Clinton, MD
Questions & Answers
What is the fastest way to get from Bethesda to Clinton, MD?
The fastest way takes 83 minutes, using Metro line RED, Metro line GREEN, Bus line P84.
Is there a direct metro between Bethesda and Clinton, MD?
No, you’ll have to take 2 metro lines and one bus line in total. The total traveling time is 1 hr 23 min.
Which metro line goes from Bethesda to Clinton, MD?
The RED metro line goes from Bethesda Metro Station near Bethesda in Montgomery County to Gallery Place-Chinatown station. From there you’ll have to take one metro line and one bus line till Gallery Place-Chinatown station near Clinton, MD in Prince George's County.
How long does it take to travel from Bethesda to Clinton, MD by metro and bus?
The total travel time between Bethesda in Montgomery County and Clinton, MD in Prince George's County by metro and bus is about 1 hr 23 min.
Where do I get on the metro near Bethesda to get to Clinton, MD?
Get on the RED metro from the Bethesda Metro Station near Bethesda in Montgomery County.
Where do I get off the metro when traveling between Bethesda and Clinton, MD?
Get off the metro at the Gallery Place-Chinatown stop, which is closest to Clinton, MD in Prince George's County.
How much is the total metro and bus fare from Bethesda to Clinton, MD?
The ride from Bethesda to Clinton, MD costs $5.20.
Popular Routes
- Crisfield to Salisbury
- Chevy Chase to Rockville
- Huntington to Alexandria
- Brandywine to Silver Spring
- Oriole Park At Camden Yards to White Marsh
- Brandywine to Greenbelt
- Washington Dulles International Airport (Iad) to Glen Burnie
- Dundalk to Frederick
- Arlington to Great Falls
- Point Of Rocks to Arlington
- Brambleton to Alexandria
- Navy Yard Metro Station to Mount Vernon
- Prince George's County to Annapolis
- Union Station to Herndon, Virginia
- Towson to Essex
- Pocomoke City to Snow Hill
- Brookland-Cua to New Carrollton
- Frederick to College Park–University Of Maryland
- Hyattsville to Bethesda
- Baltimore Penn Station to College Park