The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app
How to get from Randolph Rd & Dalewood Dr to Clinton, MD by bus and metro?
Randolph Rd & Dalewood Dr to Clinton, MD - Metro Schedule
The RED metro from Randolph Rd & Dalewood Dr to Clinton, MD runs from 5:00 AM to 11:36 PM, with departures every 5-10 min. The trip takes about 1 hr 54 min, with regular service throughout the operating hours.
From Randolph Rd & Dalewood Dr to Clinton, MD by bus and metro
To get from Randolph Rd & Dalewood Dr to Clinton, MD in Prince George's County, you’ll need to take 2 metro lines and one bus line: take the RED metro from Glenmont station to Fort Totten station. Next, you’ll have to switch to the GREEN metro and finally take the P85 bus from Branch Ave Station + Bus Bay F station to Piscataway Rd at Brandywine Rd station. The total trip duration for this route is approximately 1 hr 54 min. The ride fare is $5.60. The bus and metro schedule from Randolph Rd & Dalewood Dr may change. We recommend you check the updated bus and metro schedule to Clinton, MD on the Moovit app.
114min$5.60
P85Leaves from Glenmont
Step by Step
- 1Walk to metro stationGlenmont0.99 mi • 21 min
- 2REDWait for metroREDShady Grove
- 3
Ride to metro stationFort Totten15 min - 4GREENWait for metroGREENBranch Av
- 5Ride to metro stationBranch Avenue35 min
- 6Walk to bus stationBranch Ave Station + Bus Bay FID 300263180 yd • 2 min
- 7P85Wait for busP85Southern Maryland Hospital
- 8Ride to bus stationPiscataway Rd at Brandywine RdID 3806030 min
- 9Walk toClinton, MD120 yd • 2 min
*Duration based on 8am traffic
Public transit directions from Randolph Rd & Dalewood Dr to Clinton, MD
The distance between Randolph Rd & Dalewood Dr, Prince George's County and Clinton, MD, Prince George's County is approximately 33.31 mi, which can typically be traveled in 114 min. Moovit will show you the directions from Randolph Rd & Dalewood Dr to Clinton, MD by bus and metro, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.
Bus And Metro schedule from Randolph Rd & Dalewood Dr to Clinton, MD
To check the bus and metro schedule from Randolph Rd & Dalewood Dr to Clinton, MD using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Randolph Rd & Dalewood Dr) and destination (Clinton, MD), then select the desired date and time of travel. Moovit will show all available bus and metro routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and metro, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and metro schedules.
Related Routes
- Harry S Truman P & R to Clinton, MD
- Shady Grove Station & Bay F to Clinton, MD
- North Bethesda Station & Bay D to Clinton, MD
- 3 - Mary Washington Hospital (Main Entrance) to Clinton, MD
- 402 - Stafford Marketplace (T.J. Maxx) to Clinton, MD
- 234 Commuter Lot Crosswalk to Clinton, MD
- Manassas Dr @ Signal View Dr to Clinton, MD
- Dale Blvd @ Minnieville Rd to Clinton, MD
- Old Bridge Rd @ Oakwood Dr to Clinton, MD
- Route 1 @ Prince William Pkwy to Clinton, MD
- Route 1 @ Dawson Beach Rd to Clinton, MD
- 2200 Opitz Blvd to Clinton, MD
- Center St @ Church St to Clinton, MD
- Dale Blvd @ Kirkdale Dr to Clinton, MD
- Route 234 Commuter Lot Bus Bay to Clinton, MD
- Opitz Blvd @ Daniel Stuart Sq to Clinton, MD
- I St @ 18th St NW to Clinton, MD
- 18th St @ F St NW to Clinton, MD
- H St NW @ Jackson Pl NW to Clinton, MD
- 14th St @ Constitution Ave NW to Clinton, MD
Questions & Answers
What is the fastest way to get from Randolph Rd & Dalewood Dr to Clinton, MD?
The fastest way takes 114 minutes, using Metro line RED, Metro line GREEN, Bus line P85.
Is there a direct metro between Randolph Rd & Dalewood Dr and Clinton, MD?
No, you’ll have to take 2 metro lines and one bus line in total. The total traveling time is 1 hr 54 min.
Which metro line goes from Randolph Rd & Dalewood Dr to Clinton, MD?
The RED metro line goes from Glenmont station near Randolph Rd & Dalewood Dr in Montgomery County to Fort Totten station. From there you’ll have to take one metro line and one bus line till Fort Totten station near Clinton, MD in Prince George's County.
How long does it take to travel from Randolph Rd & Dalewood Dr to Clinton, MD by metro and bus?
The total travel time between Randolph Rd & Dalewood Dr in Montgomery County and Clinton, MD in Prince George's County by metro and bus is about 1 hr 54 min.
Where do I get on the metro near Randolph Rd & Dalewood Dr to get to Clinton, MD?
Get on the RED metro from the Glenmont station near Randolph Rd & Dalewood Dr in Montgomery County.
Where do I get off the metro when traveling between Randolph Rd & Dalewood Dr and Clinton, MD?
Get off the metro at the Fort Totten stop, which is closest to Clinton, MD in Prince George's County.
How much is the total metro and bus fare from Randolph Rd & Dalewood Dr to Clinton, MD?
The ride from Randolph Rd & Dalewood Dr to Clinton, MD costs $5.60.
Popular Routes
- Silver Spring to Capitol Heights
- Baltimore Penn Station to Bowie
- Eisenhower Ave Metrorail Station to Dca - Ronald Reagan National Airport
- Bethesda to Forest Glen
- Severn to Fort Washington
- College Park to Annapolis
- Bethesda to Severn
- Hyattsville to Baltimore
- Bethesda to Mclean
- Bethesda to Wheaton
- Manassas to National Harbor
- Silver Spring to Woodbridge
- Lusby to Washington
- Princess Anne to Easton
- Landover to Annapolis
- College Park–University Of Maryland to Georgetown University
- Gaithersburg to Oriole Park At Camden Yards
- Lexington Park to Washington
- Baltimore to Reston
- Cromwell Station / Glen Burnie to Oriole Park At Camden Yards