The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app
How to get from Parklawn Bldg;Parklawn & Twinbrook to Clinton, MD by bus and metro?
From Parklawn Bldg;Parklawn & Twinbrook to Clinton, MD by bus and metro
To get from Parklawn Bldg;Parklawn & Twinbrook to Clinton, MD in Prince George's County, you’ll need to take 2 bus lines and one metro line: take the M12 bus from Parklawn Dr+Fda station to Pg Plaza Station station. Next, you’ll have to switch to the GREEN metro and finally take the P85 bus from Branch Ave Station + Bus Bay F station to Piscataway Rd at Brandywine Rd station. The total trip duration for this route is approximately 2 hr 53 min. The ride fare is $3.25. The bus and metro schedule from Parklawn Bldg;Parklawn & Twinbrook may change. We recommend you check the updated bus and metro schedule to Clinton, MD on the Moovit app.
173min$3.25
M12
P85Leaves from Parklawn Dr+Fda
Step by Step
- 1Walk to bus stationParklawn Dr+FdaID 2000707120 yd • 2 min
- 2M12Wait for busM12East To Hyattsville Xing
- 3
Ride to bus stationPg Plaza Station73 min - 4Walk to metro stationHyattsville Crossing Metro Station20 yd • 1 min
- 5GREENWait for metroGREENBranch Av
- 6Ride to metro stationBranch Avenue41 min
- 7Walk to bus stationBranch Ave Station + Bus Bay FID 300263180 yd • 2 min
- 8P85Wait for busP85Southern Maryland Hospital
- 9Ride to bus stationPiscataway Rd at Brandywine RdID 3806030 min
- 10Walk toClinton, MD120 yd • 2 min
*Duration based on 8am traffic
Public transit directions from Parklawn Bldg;Parklawn & Twinbrook to Clinton, MD
The distance between Parklawn Bldg;Parklawn & Twinbrook, Prince George's County and Clinton, MD, Prince George's County is approximately 40.84 mi, which can typically be travelled in 173 min. Moovit will show you the directions from Parklawn Bldg;Parklawn & Twinbrook to Clinton, MD by bus and metro, so no matter how you choose to travel in Prince George's County – you will always have plenty of easy options.
Bus And Metro schedule from Parklawn Bldg;Parklawn & Twinbrook to Clinton, MD
To check the bus and metro schedule from Parklawn Bldg;Parklawn & Twinbrook to Clinton, MD using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Parklawn Bldg;Parklawn & Twinbrook) and destination (Clinton, MD), then select the desired date and time of travel. Moovit will show all available bus and metro routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and metro, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and metro schedules.
Related Routes
- Harry S Truman P & R to Clinton, MD
- Shady Grove Station & Bay F to Clinton, MD
- North Bethesda Station & Bay D to Clinton, MD
- 3 - Mary Washington Hospital (Main Entrance) to Clinton, MD
- 402 - Stafford Marketplace (T.J. Maxx) to Clinton, MD
- 234 Commuter Lot Crosswalk to Clinton, MD
- Manassas Dr @ Signal View Dr to Clinton, MD
- Dale Blvd @ Minnieville Rd to Clinton, MD
- Old Bridge Rd @ Oakwood Dr to Clinton, MD
- Route 1 @ Prince William Pkwy to Clinton, MD
- Route 1 @ Dawson Beach Rd to Clinton, MD
- 2200 Opitz Blvd to Clinton, MD
- Center St @ Church St to Clinton, MD
- Dale Blvd @ Kirkdale Dr to Clinton, MD
- Route 234 Commuter Lot Bus Bay to Clinton, MD
- Opitz Blvd @ Daniel Stuart Sq to Clinton, MD
- I St @ 18th St NW to Clinton, MD
- 18th St @ F St NW to Clinton, MD
- H St NW @ Jackson Pl NW to Clinton, MD
- 14th St @ Constitution Ave NW to Clinton, MD
Questions & Answers
What is the fastest way to get from Parklawn Bldg;Parklawn & Twinbrook to Clinton, MD?
The fastest way takes 173 minutes, using Bus line M12, Metro line GREEN, Bus line P85.
Is there a direct bus between Parklawn Bldg;Parklawn & Twinbrook and Clinton, MD?
No, you’ll have to take 2 bus lines and one metro line in total. The total travelling time is 2 hr 53 min.
Which bus line goes from Parklawn Bldg;Parklawn & Twinbrook to Clinton, MD?
The M12 bus line goes from Parklawn Dr+Fda station near Parklawn Bldg;Parklawn & Twinbrook in Montgomery County to Pg Plaza Station station. From there you’ll have to take one bus line and one metro line till Pg Plaza Station station near Clinton, MD in Prince George's County.
How long does it take to travel from Parklawn Bldg;Parklawn & Twinbrook to Clinton, MD by bus and metro?
The total travel time between Parklawn Bldg;Parklawn & Twinbrook in Montgomery County and Clinton, MD in Prince George's County by bus and metro is about 2 hr 53 min.
Where do I get on the bus near Parklawn Bldg;Parklawn & Twinbrook to get to Clinton, MD?
Get on the M12 bus from the Parklawn Dr+Fda stop near Parklawn Bldg;Parklawn & Twinbrook in Montgomery County.
Where do I get off the bus when travelling between Parklawn Bldg;Parklawn & Twinbrook and Clinton, MD?
Get off the bus at the Pg Plaza Station stop, which is closest to Clinton, MD in Prince George's County.
How much is the total bus and metro fare from Parklawn Bldg;Parklawn & Twinbrook to Clinton, MD?
The ride from Parklawn Bldg;Parklawn & Twinbrook to Clinton, MD costs $3.25.
Popular Routes
- Union Station to MedStar Washington Hospital Ctr (Washington Hospital Center)
- Navy Yard Metro Station to Suitland
- Camden Yards to Timonium, MD
- Herndon to Alexandria
- Washington Dulles International Airport (Iad) to Woodley Park-Zoo/Adams Morgan
- Tysons Corner Metro to Foggy Bottom
- Rockville to Tysons Corner
- Cromwell Station / Glen Burnie to Washington
- Glen Burnie to Oriole Park At Camden Yards
- Stafford County to Fort Belvoir
- Culpeper to Washington
- Georgetown University to Bethesda
- Ellicott City to Alexandria
- Reston to White House
- Dunkirk to Annapolis
- Pentagon City Metro Station to Tysons Corner
- New Carrollton to Odenton
- Pentagon to Bethesda
- Aberdeen to Bethesda
- Adelphi to Silver Spring