How to get from Electro to Cusco by bus?

From Electro to Cusco by bus

To get from Electro to Cusco in Wanchaq, take the RTU-10 bus from Electro station to Tecte station. Next, take the RTU-25 bus from Tecte station to Plaza Tupac Amaru station. The total trip duration for this route is approximately 10 min.

10min
Bus - RTU-10RTU-10
Bus - RTU-25RTU-25
Walk to Cusco
Leaves from Electro

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Electro
  • 2
    Bus - RTU-10RTU-10
    Wait for bus
    RTU-10
    Cusco
  • 3
    Ride to bus station
    Ride to bus station
    Tecte
    5 min
  • 4
    Bus - RTU-25RTU-25
    Wait for bus
    RTU-25
    San Antonio Parte Alta
  • 5
    Ride to bus station
    Ride to bus station
    Plaza Tupac Amaru
    3 min
  • 6
    Walk to Cusco
    Walk to
    Cusco
    120 m • 2 min
*Duration based on 8am traffic

Alternative route from Electro to Cusco by bus via RTU-10

Take one direct bus from Electro to Cusco in Wanchaq: take the RTU-10 bus from Electro station to Clorinda station. The total trip duration for this route is approximately 15 min.

15min
Bus - RTU-10RTU-10
Walk to Cusco
Leaves from Electro

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Electro
  • 2
    Bus - RTU-10RTU-10
    Wait for bus
    RTU-10
    Cusco
  • 3
    Ride to bus station
    Ride to bus station
    Clorinda
    10 min
  • 4
    Walk to Cusco
    Walk to
    Cusco
    400 m • 6 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Cusco.
All local mobility options in one app

Public transit directions from Electro to Cusco

The distance between Electro, Wanchaq and Cusco, Wanchaq is approximately 3.66 km, which can typically be travelled in 10 min. Moovit will show you the directions from Electro to Cusco by bus, so no matter how you choose to travel in Wanchaq – you will always have plenty of easy options.

Related Routes

Alternative route from Electro to Cusco by bus via RTU-10

Take one direct bus from Electro to Cusco in Wanchaq: take the RTU-10 bus from Electro station to Clorinda station. The total trip duration for this route is approximately 15 min.

15min
Bus - RTU-10RTU-10
Walk to Cusco
Leaves from Electro

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Electro
  • 2
    Bus - RTU-10RTU-10
    Wait for bus
    RTU-10
    Cusco
  • 3
    Ride to bus station
    Ride to bus station
    Clorinda
    10 min
  • 4
    Walk to Cusco
    Walk to
    Cusco
    400 m • 6 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Electro to Cusco?

    The fastest way takes 10 minutes, using Bus line RTU-10, Bus line RTU-25.

  • What is the alternative route to get from Electro to Cusco?

    The alternative route takes 15 minutes, using Bus line RTU-10.

  • Is there a direct bus between Electro and Cusco?

    No, you’ll have to take 2 bus lines in total. The total travelling time is 10 min.

  • Which bus line goes from Electro to Cusco?

    The RTU-10 bus line goes from Cusco station near Electro in Santiago to Tecte station. From there you’ll have to take one bus line till Tecte station near Cusco in Wanchaq.

  • How long does it take to travel from Electro to Cusco by bus?

    The total travel time between Electro in Santiago and Cusco in Wanchaq by bus is about 10 min.

  • Where do I get on the bus near Electro to get to Cusco?

    Get on the RTU-10 bus from the Cusco stop near Electro in Santiago.

  • Where do I get off the bus when travelling between Electro and Cusco?

    Get off the bus at the Tecte stop, which is closest to Cusco in Wanchaq.

Popular Routes