How to get from Southbound Molson at Antrim to Daniel McIntyre by bus?

From Southbound Molson at Antrim to Daniel McIntyre by bus

To get from Southbound Molson at Antrim to Daniel McIntyre in Winnipeg, you’ll need to take 3 bus lines: take the D10 bus from Southbound Molson at Antrim station to Southbound Panet at Talbot station. Next, you’ll have to switch to the D17 bus and finally take the 28 bus from Southbound Arlington at Selkirk station to Southbound Arlington at Ellice station. The total trip duration for this route is approximately 1 hr 1 min. The ride fare is CA$3.45. The bus schedule from Southbound Molson at Antrim may change. We recommend you check the updated bus schedule to Daniel McIntyre on the Moovit app.

61minCA$3.45
Bus - D10D10
Bus - D17D17
Bus - 2828
Walk to Daniel McIntyre
Leaves from Southbound Molson at Antrim

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Southbound Molson at Antrim
  • 2
    Bus - D10D10
    Wait for bus
    D10
    Kildonan Place
  • 3
    Ride to bus station
    Ride to bus station
    Southbound Panet at Talbot
    ID 40226
    6 min
  • 4
    Bus - D17D17
    Wait for bus
    D17
    Rrc Polytech
  • 5
    Ride to bus station
    Ride to bus station
    Westbound Selkirk at Arlington
    ID 30296
    23 min
  • 6
    Walk to bus station
    Walk to bus station
    Southbound Arlington at Selkirk
    ID 30312
    50 m • 1 min
  • 7
    Bus - 2828
    Wait for bus
    28
    Seel Station
  • 8
    Ride to bus station
    Ride to bus station
    Southbound Arlington at Ellice
    ID 10276
    13 min
  • 9
    Walk to Daniel McIntyre
    Walk to
    Daniel McIntyre
    400 m • 6 min
*Duration based on 8am traffic

Alternative route from Southbound Molson at Antrim to Daniel McIntyre by bus via D10, FX3 and D12

To get from Southbound Molson at Antrim to Daniel McIntyre in Winnipeg, you’ll need to take 3 bus lines: take the D10 bus from Southbound Molson at Antrim station to Southbound Kildonan Place at Kildonan Place Hub (D10) station. Next, you’ll have to switch to the FX3 bus and finally take the D12 bus from Westbound Pioneer at Portage And Main Junction station to Westbound Ellice at Banning station. The total trip duration for this route is approximately 1 hr 15 min. The ride fare is CA$3.45. The bus schedule from Southbound Molson at Antrim may change. We recommend you check the updated bus schedule to Daniel McIntyre on the Moovit app.

75minCA$3.45
Bus - D10D10
Bus - FX3FX3
Bus - D12D12
Walk to Daniel McIntyre
Leaves from Southbound Molson at Antrim

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Southbound Molson at Antrim
  • 2
    Bus - D10D10
    Wait for bus
    D10
    Kildonan Place
  • 3
    Ride to bus station
    Ride to bus station
    Southbound Kildonan Place at Kildonan Place Hub (D10)
    ID 40788
    9 min
  • 4
    Walk to bus station
    Walk to bus station
    Westbound Regent at Kildonan Place Hub
    ID 40186
    40 m • 1 min
  • 5
    Bus - FX3FX3
    Wait for bus
    FX3
    Sturgeon & Murray Park
  • 6
    Ride to bus station
    Ride to bus station
    Southbound Main at Portage And Main Junction
    ID 10638
    19 min
  • 7
    Walk to bus station
    Walk to bus station
    Westbound Pioneer at Portage And Main Junction
    ID 10761
    60 m • 1 min
  • 8
    Bus - D12D12
    Wait for bus
    D12
    The Airport
  • 9
    Ride to bus station
    Ride to bus station
    Westbound Ellice at Banning
    ID 10517
    11 min
  • 10
    Walk to Daniel McIntyre
    Walk to
    Daniel McIntyre
    180 m • 3 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Winnipeg.
All local mobility options in one app

Public transit directions from Southbound Molson at Antrim to Daniel McIntyre

The distance between Southbound Molson at Antrim, Winnipeg and Daniel McIntyre, Winnipeg is approximately 14.32 km, which can typically be travelled in 61 min. Moovit will show you the directions from Southbound Molson at Antrim to Daniel McIntyre by bus, so no matter how you choose to travel in Winnipeg – you will always have plenty of easy options.

Bus schedule from Southbound Molson at Antrim to Daniel McIntyre

To check the bus schedule from Southbound Molson at Antrim to Daniel McIntyre using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Southbound Molson at Antrim) and destination (Daniel McIntyre), then select the desired date and time of travel. Moovit will show all available bus routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus schedules.

Related Routes

Alternative route from Southbound Molson at Antrim to Daniel McIntyre by bus via D10, FX3 and D12

To get from Southbound Molson at Antrim to Daniel McIntyre in Winnipeg, you’ll need to take 3 bus lines: take the D10 bus from Southbound Molson at Antrim station to Southbound Kildonan Place at Kildonan Place Hub (D10) station. Next, you’ll have to switch to the FX3 bus and finally take the D12 bus from Westbound Pioneer at Portage And Main Junction station to Westbound Ellice at Banning station. The total trip duration for this route is approximately 1 hr 15 min. The ride fare is CA$3.45. The bus schedule from Southbound Molson at Antrim may change. We recommend you check the updated bus schedule to Daniel McIntyre on the Moovit app.

75minCA$3.45
Bus - D10D10
Bus - FX3FX3
Bus - D12D12
Walk to Daniel McIntyre
Leaves from Southbound Molson at Antrim

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Southbound Molson at Antrim
  • 2
    Bus - D10D10
    Wait for bus
    D10
    Kildonan Place
  • 3
    Ride to bus station
    Ride to bus station
    Southbound Kildonan Place at Kildonan Place Hub (D10)
    ID 40788
    9 min
  • 4
    Walk to bus station
    Walk to bus station
    Westbound Regent at Kildonan Place Hub
    ID 40186
    40 m • 1 min
  • 5
    Bus - FX3FX3
    Wait for bus
    FX3
    Sturgeon & Murray Park
  • 6
    Ride to bus station
    Ride to bus station
    Southbound Main at Portage And Main Junction
    ID 10638
    19 min
  • 7
    Walk to bus station
    Walk to bus station
    Westbound Pioneer at Portage And Main Junction
    ID 10761
    60 m • 1 min
  • 8
    Bus - D12D12
    Wait for bus
    D12
    The Airport
  • 9
    Ride to bus station
    Ride to bus station
    Westbound Ellice at Banning
    ID 10517
    11 min
  • 10
    Walk to Daniel McIntyre
    Walk to
    Daniel McIntyre
    180 m • 3 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Southbound Molson at Antrim to Daniel McIntyre?

    The fastest way takes 61 minutes, using Bus line D10, Bus line D17, Bus line 28.

  • What is the alternative route to get from Southbound Molson at Antrim to Daniel McIntyre?

    The alternative route takes 75 minutes, using Bus line D10, Bus line FX3, Bus line D12.

  • Is there a direct bus between Southbound Molson at Antrim and Daniel McIntyre in Winnipeg?

    No, you’ll have to take 3 bus lines in total. The total travelling time is 1 hr 1 min.

  • Which bus line goes from Southbound Molson at Antrim to Daniel McIntyre in Winnipeg?

    The D10 bus line goes from Southbound Panet at Talbot station near Southbound Molson at Antrim to Westbound Selkirk at Arlington station. From there you’ll have to take one bus line till Westbound Selkirk at Arlington station near Daniel McIntyre in Winnipeg.

  • How long does it take to travel from Southbound Molson at Antrim to Daniel McIntyre in Winnipeg by bus?

    The total travel time between Southbound Molson at Antrim and Daniel McIntyre in Winnipeg by bus is about 1 hr 1 min.

  • Where do I get on the bus near Southbound Molson at Antrim to get to Daniel McIntyre in Winnipeg?

    Get on the D10 bus from the Southbound Panet at Talbot stop near Southbound Molson at Antrim in Winnipeg.

  • Where do I get off the bus when travelling between Southbound Molson at Antrim and Daniel McIntyre in Winnipeg?

    Get off the bus at the Westbound Selkirk at Arlington stop, which is closest to Daniel McIntyre in Winnipeg.

  • How much is the bus fare from Southbound Molson at Antrim to Daniel McIntyre?

    The ride from Southbound Molson at Antrim to Daniel McIntyre costs CA$3.45.

Popular Routes