How to get from Southbound Molson at Concordia to Daniel McIntyre by bus?

From Southbound Molson at Concordia to Daniel McIntyre by bus

To get from Southbound Molson at Concordia to Daniel McIntyre in Winnipeg, you’ll need to take 3 bus lines: take the 442 bus from Westbound Concordia at Molson station to Northbound Gateway at Kimberly station. Next, you’ll have to switch to the FX4 bus and finally take the D12 bus from Westbound Pioneer at Portage And Main Junction station to Westbound Ellice at Banning station. The total trip duration for this route is approximately 53 min. The ride fare is CA$3.45. The bus schedule from Southbound Molson at Concordia may change. We recommend you check the updated bus schedule to Daniel McIntyre on the Moovit app.

53minCA$3.45
Walk to bus station
Bus - 442442
Bus - FX4FX4
Bus - D12D12
Walk to Daniel McIntyre
Leaves from Westbound Concordia at Molson

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Westbound Concordia at Molson
    ID 40675
    60 m • 1 min
  • 2
    Bus - 442442
    Wait for bus
    442
    Springfield Loop
  • 3
    Ride to bus station
    Ride to bus station
    Northbound Gateway at Kimberly
    ID 40351
    6 min
  • 4
    Walk to bus station
    Walk to bus station
    Southbound Gateway at Bronx
    ID 40400
    40 m • 1 min
  • 5
    Bus - FX4FX4
    Wait for bus
    FX4
    Downtown
  • 6
    Ride to bus station
    Ride to bus station
    Westbound Pioneer at Portage And Main Junction
    ID 10761
    18 min
  • 7
    Bus - D12D12
    Wait for bus
    D12
    The Airport
  • 8
    Ride to bus station
    Ride to bus station
    Westbound Ellice at Banning
    ID 10517
    13 min
  • 9
    Walk to Daniel McIntyre
    Walk to
    Daniel McIntyre
    180 m • 3 min
*Duration based on 8am traffic

Alternative route from Southbound Molson at Concordia to Daniel McIntyre by bus via D10, FX3 and D12

To get from Southbound Molson at Concordia to Daniel McIntyre in Winnipeg, you’ll need to take 3 bus lines: take the D10 bus from Southbound Molson at Concordia station to Eastbound Regent at Stapon station. Next, you’ll have to switch to the FX3 bus and finally take the D12 bus from Westbound Pioneer at Portage And Main Junction station to Westbound Ellice at Banning station. The total trip duration for this route is approximately 59 min. The ride fare is CA$3.45. The bus schedule from Southbound Molson at Concordia may change. We recommend you check the updated bus schedule to Daniel McIntyre on the Moovit app.

59minCA$3.45
Bus - D10D10
Bus - FX3FX3
Bus - D12D12
Walk to Daniel McIntyre
Leaves from Southbound Molson at Concordia

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Southbound Molson at Concordia
  • 2
    Bus - D10D10
    Wait for bus
    D10
    Kildonan Place
  • 3
    Ride to bus station
    Ride to bus station
    Eastbound Regent at Stapon
    ID 40196
    7 min
  • 4
    Walk to bus station
    Walk to bus station
    Westbound Regent at Stapon
    ID 40195
    90 m • 2 min
  • 5
    Bus - FX3FX3
    Wait for bus
    FX3
    Sturgeon & Murray Park
  • 6
    Ride to bus station
    Ride to bus station
    Southbound Main at Portage And Main Junction
    ID 10638
    21 min
  • 7
    Walk to bus station
    Walk to bus station
    Westbound Pioneer at Portage And Main Junction
    ID 10761
    60 m • 1 min
  • 8
    Bus - D12D12
    Wait for bus
    D12
    The Airport
  • 9
    Ride to bus station
    Ride to bus station
    Westbound Ellice at Banning
    ID 10517
    13 min
  • 10
    Walk to Daniel McIntyre
    Walk to
    Daniel McIntyre
    180 m • 3 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Winnipeg.
All local mobility options in one app

Public transit directions from Southbound Molson at Concordia to Daniel McIntyre

The distance between Southbound Molson at Concordia, Winnipeg and Daniel McIntyre, Winnipeg is approximately 11.3 km, which can typically be travelled in 53 min. Moovit will show you the directions from Southbound Molson at Concordia to Daniel McIntyre by bus, so no matter how you choose to travel in Winnipeg – you will always have plenty of easy options.

Bus schedule from Southbound Molson at Concordia to Daniel McIntyre

To check the bus schedule from Southbound Molson at Concordia to Daniel McIntyre using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Southbound Molson at Concordia) and destination (Daniel McIntyre), then select the desired date and time of travel. Moovit will show all available bus routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus schedules.

Related Routes

Alternative route from Southbound Molson at Concordia to Daniel McIntyre by bus via D10, FX3 and D12

To get from Southbound Molson at Concordia to Daniel McIntyre in Winnipeg, you’ll need to take 3 bus lines: take the D10 bus from Southbound Molson at Concordia station to Eastbound Regent at Stapon station. Next, you’ll have to switch to the FX3 bus and finally take the D12 bus from Westbound Pioneer at Portage And Main Junction station to Westbound Ellice at Banning station. The total trip duration for this route is approximately 59 min. The ride fare is CA$3.45. The bus schedule from Southbound Molson at Concordia may change. We recommend you check the updated bus schedule to Daniel McIntyre on the Moovit app.

59minCA$3.45
Bus - D10D10
Bus - FX3FX3
Bus - D12D12
Walk to Daniel McIntyre
Leaves from Southbound Molson at Concordia

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Southbound Molson at Concordia
  • 2
    Bus - D10D10
    Wait for bus
    D10
    Kildonan Place
  • 3
    Ride to bus station
    Ride to bus station
    Eastbound Regent at Stapon
    ID 40196
    7 min
  • 4
    Walk to bus station
    Walk to bus station
    Westbound Regent at Stapon
    ID 40195
    90 m • 2 min
  • 5
    Bus - FX3FX3
    Wait for bus
    FX3
    Sturgeon & Murray Park
  • 6
    Ride to bus station
    Ride to bus station
    Southbound Main at Portage And Main Junction
    ID 10638
    21 min
  • 7
    Walk to bus station
    Walk to bus station
    Westbound Pioneer at Portage And Main Junction
    ID 10761
    60 m • 1 min
  • 8
    Bus - D12D12
    Wait for bus
    D12
    The Airport
  • 9
    Ride to bus station
    Ride to bus station
    Westbound Ellice at Banning
    ID 10517
    13 min
  • 10
    Walk to Daniel McIntyre
    Walk to
    Daniel McIntyre
    180 m • 3 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Southbound Molson at Concordia to Daniel McIntyre?

    The fastest way takes 53 minutes, using Bus line 442, Bus line FX4, Bus line D12.

  • What is the alternative route to get from Southbound Molson at Concordia to Daniel McIntyre?

    The alternative route takes 59 minutes, using Bus line D10, Bus line FX3, Bus line D12.

  • Is there a direct bus between Southbound Molson at Concordia and Daniel McIntyre in Winnipeg?

    No, you’ll have to take 3 bus lines in total. The total travelling time is 53 min.

  • Which bus line goes from Southbound Molson at Concordia to Daniel McIntyre in Winnipeg?

    The 442 bus line goes from Westbound Concordia at Molson station near Southbound Molson at Concordia to Springfield Loop station. From there you’ll have to take one bus line till Springfield Loop station near Daniel McIntyre in Winnipeg.

  • How long does it take to travel from Southbound Molson at Concordia to Daniel McIntyre in Winnipeg by bus?

    The total travel time between Southbound Molson at Concordia and Daniel McIntyre in Winnipeg by bus is about 53 min.

  • Where do I get on the bus near Southbound Molson at Concordia to get to Daniel McIntyre in Winnipeg?

    Get on the 442 bus from the Westbound Concordia at Molson stop near Southbound Molson at Concordia in Winnipeg.

  • Where do I get off the bus when travelling between Southbound Molson at Concordia and Daniel McIntyre in Winnipeg?

    Get off the bus at the Springfield Loop stop, which is closest to Daniel McIntyre in Winnipeg.

  • When is the last bus from Southbound Molson at Concordia to Daniel McIntyre in Winnipeg?

    The last bus from Southbound Molson at Concordia to Daniel McIntyre in Winnipeg is the Gateway - Portage line. It leaves the Southbound Gateway at Bronx stop at 8:11 PM.

  • How much is the bus fare from Southbound Molson at Concordia to Daniel McIntyre?

    The ride from Southbound Molson at Concordia to Daniel McIntyre costs CA$3.45.

Popular Routes