How to get from Eastbound Talbot at Kent to Daniel McIntyre by bus?

From Eastbound Talbot at Kent to Daniel McIntyre by bus

To get from Eastbound Talbot at Kent to Daniel McIntyre in Winnipeg, take the FX3 bus from Westbound Nairn at Kent station to Southbound Main at Portage And Main Junction station. Next, take the D12 bus from Westbound Pioneer at Portage And Main Junction station to Westbound Ellice at Banning station. The total trip duration for this route is approximately 42 min. The ride fare is CA$3.45.

42minCA$3.45
Walk to bus station
Bus - FX3FX3
Bus - D12D12
Walk to Daniel McIntyre
Leaves from Westbound Nairn at Kent

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Westbound Nairn at Kent
    ID 40286
    250 m • 4 min
  • 2
    Bus - FX3FX3
    Wait for bus
    FX3
    Sturgeon & Murray Park
  • 3
    Ride to bus station
    Ride to bus station
    Southbound Main at Portage And Main Junction
    ID 10638
    17 min
  • 4
    Walk to bus station
    Walk to bus station
    Westbound Pioneer at Portage And Main Junction
    ID 10761
    60 m • 1 min
  • 5
    Bus - D12D12
    Wait for bus
    D12
    The Airport
  • 6
    Ride to bus station
    Ride to bus station
    Westbound Ellice at Banning
    ID 10517
    13 min
  • 7
    Walk to Daniel McIntyre
    Walk to
    Daniel McIntyre
    180 m • 3 min
*Duration based on 8am traffic

Alternative route from Eastbound Talbot at Kent to Daniel McIntyre by bus via D17, FX4 and D12

To get from Eastbound Talbot at Kent to Daniel McIntyre in Winnipeg, you’ll need to take 3 bus lines: take the D17 bus from Westbound Talbot at Kent station to Westbound Talbot at Watt station. Next, you’ll have to switch to the FX4 bus and finally take the D12 bus from Westbound Pioneer at Portage And Main Junction station to Westbound Ellice at Banning station. The total trip duration for this route is approximately 43 min. The ride fare is CA$3.45.

43minCA$3.45
Walk to bus station
Bus - D17D17
Bus - FX4FX4
Bus - D12D12
Walk to Daniel McIntyre
Leaves from Westbound Talbot at Kent

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Westbound Talbot at Kent
    ID 40284
    50 m • 1 min
  • 2
    Bus - D17D17
    Wait for bus
    D17
    Rrc Polytech
  • 3
    Ride to bus station
    Ride to bus station
    Westbound Talbot at Watt
    ID 41072
    5 min
  • 4
    Walk to bus station
    Walk to bus station
    Southbound Watt at Talbot
    ID 41069
    60 m • 1 min
  • 5
    Bus - FX4FX4
    Wait for bus
    FX4
    Polo Park
  • 6
    Ride to bus station
    Ride to bus station
    Westbound Pioneer at Portage And Main Junction
    ID 10761
    10 min
  • 7
    Bus - D12D12
    Wait for bus
    D12
    The Airport
  • 8
    Ride to bus station
    Ride to bus station
    Westbound Ellice at Banning
    ID 10517
    13 min
  • 9
    Walk to Daniel McIntyre
    Walk to
    Daniel McIntyre
    180 m • 3 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Winnipeg.
All local mobility options in one app

Public transit directions from Eastbound Talbot at Kent to Daniel McIntyre

The distance between Eastbound Talbot at Kent, Winnipeg and Daniel McIntyre, Winnipeg is approximately 8.8 km, which can typically be travelled in 42 min. Moovit will show you the directions from Eastbound Talbot at Kent to Daniel McIntyre by bus, so no matter how you choose to travel in Winnipeg – you will always have plenty of easy options.

Public transit stations close to Eastbound Talbot at Kent

Eastbound Talbot at Kent is located at Eastbound Talbot at Kent, Winnipeg and the nearest public transit station is Eastbound Nairn at Grey.

Bus stations close to Eastbound Talbot at Kent:

  • Eastbound Nairn at Grey
  • Westbound Talbot at Grey
  • Eastbound Talbot at Stapleton

Public transit stations close to Daniel McIntyre, Winnipeg

Daniel McIntyre is located at Daniel McIntyre, Winnipeg and the nearest public transit station is Eastbound Ellice at Banning.

Bus stations close to Daniel McIntyre:

  • Eastbound Ellice at Banning
  • Westbound Ellice at Banning
  • Eastbound Ellice at Ingersoll

Related Routes

Alternative route from Eastbound Talbot at Kent to Daniel McIntyre by bus via D17, FX4 and D12

To get from Eastbound Talbot at Kent to Daniel McIntyre in Winnipeg, you’ll need to take 3 bus lines: take the D17 bus from Westbound Talbot at Kent station to Westbound Talbot at Watt station. Next, you’ll have to switch to the FX4 bus and finally take the D12 bus from Westbound Pioneer at Portage And Main Junction station to Westbound Ellice at Banning station. The total trip duration for this route is approximately 43 min. The ride fare is CA$3.45.

43minCA$3.45
Walk to bus station
Bus - D17D17
Bus - FX4FX4
Bus - D12D12
Walk to Daniel McIntyre
Leaves from Westbound Talbot at Kent

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Westbound Talbot at Kent
    ID 40284
    50 m • 1 min
  • 2
    Bus - D17D17
    Wait for bus
    D17
    Rrc Polytech
  • 3
    Ride to bus station
    Ride to bus station
    Westbound Talbot at Watt
    ID 41072
    5 min
  • 4
    Walk to bus station
    Walk to bus station
    Southbound Watt at Talbot
    ID 41069
    60 m • 1 min
  • 5
    Bus - FX4FX4
    Wait for bus
    FX4
    Polo Park
  • 6
    Ride to bus station
    Ride to bus station
    Westbound Pioneer at Portage And Main Junction
    ID 10761
    10 min
  • 7
    Bus - D12D12
    Wait for bus
    D12
    The Airport
  • 8
    Ride to bus station
    Ride to bus station
    Westbound Ellice at Banning
    ID 10517
    13 min
  • 9
    Walk to Daniel McIntyre
    Walk to
    Daniel McIntyre
    180 m • 3 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Eastbound Talbot at Kent to Daniel McIntyre?

    The fastest way takes 42 minutes, using Bus line FX3, Bus line D12.

  • What is the alternative route to get from Eastbound Talbot at Kent to Daniel McIntyre?

    The alternative route takes 43 minutes, using Bus line D17, Bus line FX4, Bus line D12.

  • Is there a direct bus between Eastbound Talbot at Kent and Daniel McIntyre in Winnipeg?

    No, you’ll have to take 2 bus lines in total. The total travelling time is 42 min.

  • Which bus line goes from Eastbound Talbot at Kent to Daniel McIntyre in Winnipeg?

    The FX3 bus line goes from Westbound Nairn at Kent station near Eastbound Talbot at Kent to Sturgeon & Murray Park station. From there you’ll have to take one bus line till Sturgeon & Murray Park station near Daniel McIntyre in Winnipeg

  • How long does it take to travel from Eastbound Talbot at Kent to Daniel McIntyre in Winnipeg by bus?

    The total travel time between Eastbound Talbot at Kent and Daniel McIntyre in Winnipeg by bus is about 42 min.

  • Where do I get on the bus near Eastbound Talbot at Kent to get to Daniel McIntyre in Winnipeg?

    Get on the FX3 bus from the Westbound Nairn at Kent stop near Eastbound Talbot at Kent in Winnipeg.

  • Where do I get off the bus when travelling between Eastbound Talbot at Kent and Daniel McIntyre in Winnipeg?

    Get off the bus at the Sturgeon & Murray Park stop, which is closest to Daniel McIntyre in Winnipeg.

  • How much is the bus fare from Eastbound Talbot at Kent to Daniel McIntyre?

    The ride from Eastbound Talbot at Kent to Daniel McIntyre costs CA$3.45.

Popular Routes