How to get from Northbound Redonda at Redonda Loop to Daniel McIntyre by bus?

From Northbound Redonda at Redonda Loop to Daniel McIntyre by bus

To get from Northbound Redonda at Redonda Loop to Daniel McIntyre in Winnipeg, take the FX3 bus from Northbound Redonda at Redonda Loop station to Southbound Main at Portage And Main Junction station. Next, take the D12 bus from Westbound Pioneer at Portage And Main Junction station to Westbound Ellice at Banning station. The total trip duration for this route is approximately 60 min. The ride fare is CA$3.45.

60minCA$3.45
Bus - FX3FX3
Bus - D12D12
Walk to Daniel McIntyre
Leaves from Northbound Redonda at Redonda Loop

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Northbound Redonda at Redonda Loop
  • 2
    Bus - FX3FX3
    Wait for bus
    FX3
    Downtown
  • 3
    Ride to bus station
    Ride to bus station
    Southbound Main at Portage And Main Junction
    ID 10638
    36 min
  • 4
    Walk to bus station
    Walk to bus station
    Westbound Pioneer at Portage And Main Junction
    ID 10761
    60 m • 1 min
  • 5
    Bus - D12D12
    Wait for bus
    D12
    The Airport
  • 6
    Ride to bus station
    Ride to bus station
    Westbound Ellice at Banning
    ID 10517
    13 min
  • 7
    Walk to Daniel McIntyre
    Walk to
    Daniel McIntyre
    180 m • 3 min
*Duration based on 8am traffic

Alternative route from Northbound Redonda at Redonda Loop to Daniel McIntyre by bus via FX3 and D13

To get from Northbound Redonda at Redonda Loop to Daniel McIntyre in Winnipeg, take the FX3 bus from Northbound Redonda at Redonda Loop station to Southbound Main at Portage And Main Junction station. Next, take the D13 bus from Westbound Pioneer at Portage And Main Junction station to Westbound Sargent at Banning station. The total trip duration for this route is approximately 1 hr 2 min. The ride fare is CA$3.45.

62minCA$3.45
Bus - FX3FX3
Bus - D13D13
Walk to Daniel McIntyre
Leaves from Northbound Redonda at Redonda Loop

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Northbound Redonda at Redonda Loop
  • 2
    Bus - FX3FX3
    Wait for bus
    FX3
    Sturgeon & Murray Park
  • 3
    Ride to bus station
    Ride to bus station
    Southbound Main at Portage And Main Junction
    ID 10638
    36 min
  • 4
    Walk to bus station
    Walk to bus station
    Westbound Pioneer at Portage And Main Junction
    ID 10761
    60 m • 1 min
  • 5
    Bus - D13D13
    Wait for bus
    D13
    The Airport
  • 6
    Ride to bus station
    Ride to bus station
    Westbound Sargent at Banning
    ID 10470
    15 min
  • 7
    Walk to Daniel McIntyre
    Walk to
    Daniel McIntyre
    540 m • 7 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Winnipeg.
All local mobility options in one app

Public transit directions from Northbound Redonda at Redonda Loop to Daniel McIntyre

The distance between Northbound Redonda at Redonda Loop, Winnipeg and Daniel McIntyre, Winnipeg is approximately 16.46 km, which can typically be travelled in 60 min. Moovit will show you the directions from Northbound Redonda at Redonda Loop to Daniel McIntyre by bus, so no matter how you choose to travel in Winnipeg – you will always have plenty of easy options.

Public transit stations close to Northbound Redonda at Redonda Loop

Northbound Redonda at Redonda Loop is located at Northbound Redonda at Redonda Loop, Winnipeg and the nearest public transit station is Southbound Redonda at Pandora.

Bus stations close to Northbound Redonda at Redonda Loop:

  • Southbound Redonda at Pandora
  • Southbound Redonda at Victoria
  • Northbound Redonda at Victoria

Public transit stations close to Daniel McIntyre, Winnipeg

Daniel McIntyre is located at Daniel McIntyre, Winnipeg and the nearest public transit station is Eastbound Ellice at Banning.

Bus stations close to Daniel McIntyre:

  • Eastbound Ellice at Banning
  • Westbound Ellice at Banning
  • Eastbound Ellice at Ingersoll

Related Routes

Alternative route from Northbound Redonda at Redonda Loop to Daniel McIntyre by bus via FX3 and D13

To get from Northbound Redonda at Redonda Loop to Daniel McIntyre in Winnipeg, take the FX3 bus from Northbound Redonda at Redonda Loop station to Southbound Main at Portage And Main Junction station. Next, take the D13 bus from Westbound Pioneer at Portage And Main Junction station to Westbound Sargent at Banning station. The total trip duration for this route is approximately 1 hr 2 min. The ride fare is CA$3.45.

62minCA$3.45
Bus - FX3FX3
Bus - D13D13
Walk to Daniel McIntyre
Leaves from Northbound Redonda at Redonda Loop

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Northbound Redonda at Redonda Loop
  • 2
    Bus - FX3FX3
    Wait for bus
    FX3
    Sturgeon & Murray Park
  • 3
    Ride to bus station
    Ride to bus station
    Southbound Main at Portage And Main Junction
    ID 10638
    36 min
  • 4
    Walk to bus station
    Walk to bus station
    Westbound Pioneer at Portage And Main Junction
    ID 10761
    60 m • 1 min
  • 5
    Bus - D13D13
    Wait for bus
    D13
    The Airport
  • 6
    Ride to bus station
    Ride to bus station
    Westbound Sargent at Banning
    ID 10470
    15 min
  • 7
    Walk to Daniel McIntyre
    Walk to
    Daniel McIntyre
    540 m • 7 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Northbound Redonda at Redonda Loop to Daniel McIntyre?

    The fastest way takes 60 minutes, using Bus line FX3, Bus line D12.

  • What is the alternative route to get from Northbound Redonda at Redonda Loop to Daniel McIntyre?

    The alternative route takes 62 minutes, using Bus line FX3, Bus line D13.

  • Is there a direct bus between Northbound Redonda at Redonda Loop and Daniel McIntyre in Winnipeg?

    No, you’ll have to take 2 bus lines in total. The total travelling time is 60 min.

  • Which bus line goes from Northbound Redonda at Redonda Loop to Daniel McIntyre in Winnipeg?

    The FX3 bus line goes from Downtown station near Northbound Redonda at Redonda Loop to Southbound Main at Portage And Main Junction station. From there you’ll have to take one bus line till Southbound Main at Portage And Main Junction station near Daniel McIntyre in Winnipeg

  • How long does it take to travel from Northbound Redonda at Redonda Loop to Daniel McIntyre in Winnipeg by bus?

    The total travel time between Northbound Redonda at Redonda Loop and Daniel McIntyre in Winnipeg by bus is about 60 min.

  • Where do I get on the bus near Northbound Redonda at Redonda Loop to get to Daniel McIntyre in Winnipeg?

    Get on the FX3 bus from the Downtown stop near Northbound Redonda at Redonda Loop in Winnipeg.

  • Where do I get off the bus when travelling between Northbound Redonda at Redonda Loop and Daniel McIntyre in Winnipeg?

    Get off the bus at the Southbound Main at Portage And Main Junction stop, which is closest to Daniel McIntyre in Winnipeg.

  • How much is the bus fare from Northbound Redonda at Redonda Loop to Daniel McIntyre?

    The ride from Northbound Redonda at Redonda Loop to Daniel McIntyre costs CA$3.45.

Popular Routes