How to get from San Martino to Design Campus by bus?
From San Martino to Design Campus by bus
To get from San Martino to Design Campus in Calenzano, you’ll need to take 3 bus lines: take the S10 bus from San Martino station to Province station. Next, you’ll have to switch to the 131 bus and finally take the 57 bus from Porte Nuove Belfiore station to Pertini Lindens station. The total trip duration for this route is approximately 3 hr 38 min. The bus schedule from San Martino may change. We recommend you check the updated bus schedule to Design Campus on the Moovit app.
Step by Step
- 1Start from bus stationSan Martino
- 2Wait for busS10San Miniato
- 3Ride to bus stationProvinceID SI00395 min
- 4Walk to bus stationFontebecciID SI0382130 m • 2 min
- 5Wait for bus131Florence Bus Station
- 6Ride to bus stationLeopolda T1 Porta Al PratoID FI575188 min
- 7Walk to bus stationPorte Nuove BelfioreID FI0126410 m • 6 min
- 8Wait for bus57Calenzano University
- 9Ride to bus stationPertini LindensID CAL83545 min
- 10Walk toDesign CampusSandro Pertini Street140 m • 2 min
Public transit directions from San Martino to Design Campus
Bus schedule from San Martino to Design Campus
Related Routes
- Calenzano University to Design Campus
- T2 Belfiore to Design Campus
- Treggiaia I Fabbri 1 to Design Campus
- Aretina Dalla Chiesa to Design Campus
- Antonio Segni Street to Design Campus
- Olmi Montalbano Street to Design Campus
- San Marco Basilica to Design Campus
- San Marco Square to Design Campus
- Cecina Mare to Design Campus
- Marina Di Massa Betti Square to Design Campus
- Pistoia Alighieri Square [AT Ticket Office] to Design Campus
- Pistoia Alighieri Square [Railway Station] to Design Campus
- Barriera Square to Design Campus
- Siena-San Domenico Square to Design Campus
- Siena-Via Tozzi to Design Campus
- Old Station to Design Campus
- Le Lupe to Design Campus
- Siena Bus Station to Design Campus
- San Carlo Thermal Baths to Design Campus
- Old Montevarchi Bus Station to Design Campus
Questions & Answers
What is the fastest way to get from San Martino to Design Campus?
The fastest way takes 218 minutes, using bus line S10, bus line 131, bus line 57.
Is there a direct bus between San Martino and Design Campus?
No, you’ll have to take 3 bus lines in total. The total traveling time is 3 hr 38 min.
Which bus line goes from San Martino to Design Campus?
The S10 bus line goes from Province station near San Martino in Monteriggioni to Fontebecci station. From there you’ll have to take one bus line till Fontebecci station near Design Campus in Calenzano.
How long does it take to travel from San Martino to Design Campus by bus?
The total travel time between San Martino in Monteriggioni and Design Campus in Calenzano by bus is about 3 hr 38 min.
Where do I get on the bus near San Martino to get to Design Campus?
Get on the S10 bus from the Province stop near San Martino in Monteriggioni.
Where do I get off the bus when traveling between San Martino and Design Campus?
Get off the bus at the Fontebecci stop, which is closest to Design Campus in Calenzano.
Popular Routes
- Borgo San Lorenzo to Montopoli In Val D' Arno
- Figline Valdarno to Tavarnelle Val Di Pesa
- Collesalvetti to Volterra
- Forte Dei Marmi to San Romano in Garfagnana
- Florence Campo Di Marte to Careggi University Hospital
- Prato Centrale to San Jacopo Hospital
- Prato Centrale to Santa Maria Nuova Hospital
- Viareggio to Cecina
- Campiglia Marittima to Cortona
- Pieve A Nievole to Camaiore
- Orbetello to Monte Argentario
- Florence Rifredi to Barberino Di Mugello
- Scandicci to Pisa
- Sinalunga to Foiano Della Chiana
- Florence to Sinalunga
- Montecatini-Terme to Scandicci
- Cortona to Rapolano Terme
- Grosseto to Castelfiorentino
- Florence Rifredi to Collesalvetti
- Florence Campo Di Marte to Santa Croce sull' Arno