How to get from Scotte Junction to Design Campus by bus?
Scotte Junction to Design Campus - Bus Schedule
The S10 bus from Scotte Junction to Design Campus runs from 09:12 to 18:12, with departures every 1 hr-4 hr. The trip takes about 3 hr 12 min, with regular service throughout the operating hours.
From Scotte Junction to Design Campus by bus
To get from Scotte Junction to Design Campus in Calenzano, you’ll need to take 3 bus lines: take the S10 bus from Scotte Junction station to Camollia Gate station. Next, you’ll have to switch to the 131 bus and finally take the 57 bus from Porte Nuove Belfiore station to Pertini Lindens station. The total trip duration for this route is approximately 3 hr 12 min. The bus schedule from Scotte Junction may change. We recommend you check the updated bus schedule to Design Campus on the Moovit app.
Step by Step
- 1Start from bus stationScotte Junction
- 2Wait for busS10San Martino
- 3Ride to bus stationCamollia GateID SI006315 min
- 4Wait for bus131Florence Bus Station
- 5Ride to bus stationLeopolda T1 Porta Al PratoID FI575192 min
- 6Walk to bus stationPorte Nuove BelfioreID FI0126400 m • 6 min
- 7Wait for bus57Calenzano University
- 8Ride to bus stationPertini LindensID FM883545 min
- 9Walk toDesign CampusSandro Pertini Street140 m • 2 min
Public transit directions from Scotte Junction to Design Campus
Bus schedule from Scotte Junction to Design Campus
Related Routes
- Calenzano University to Design Campus
- T2 Belfiore to Design Campus
- Treggiaia I Fabbri 1 to Design Campus
- Aretina Dalla Chiesa to Design Campus
- Antonio Segni Street to Design Campus
- Olmi Montalbano Street to Design Campus
- San Marco Basilica to Design Campus
- San Marco Square to Design Campus
- Cecina Mare to Design Campus
- Marina Di Massa Betti Square to Design Campus
- Pistoia Alighieri Square [AT Ticket Office] to Design Campus
- Pistoia Alighieri Square [Railway Station] to Design Campus
- Barriera Square to Design Campus
- Siena-San Domenico Square to Design Campus
- Siena-Via Tozzi to Design Campus
- Old Station to Design Campus
- Le Lupe to Design Campus
- Siena Bus Station to Design Campus
- San Carlo Thermal Baths to Design Campus
- Old Montevarchi Bus Station to Design Campus
Questions & Answers
What is the fastest way to get from Scotte Junction to Design Campus?
The fastest way takes 192 minutes, using Bus line S10, Bus line 131, Bus line 57.
Is there a direct bus between Scotte Junction and Design Campus?
No, you’ll have to take 3 bus lines in total. The total travelling time is 3 hr 12 min.
Which bus line goes from Scotte Junction to Design Campus?
The S10 bus line goes from Camollia Gate station near Scotte Junction in Florence to Leopolda T1 Porta Al Prato station. From there you’ll have to take one bus line till Leopolda T1 Porta Al Prato station near Design Campus in Calenzano.
How long does it take to travel from Scotte Junction to Design Campus by bus?
The total travel time between Scotte Junction in Florence and Design Campus in Calenzano by bus is about 3 hr 12 min.
Where do I get on the bus near Scotte Junction to get to Design Campus?
Get on the S10 bus from the Camollia Gate stop near Scotte Junction in Florence.
Where do I get off the bus when travelling between Scotte Junction and Design Campus?
Get off the bus at the Leopolda T1 Porta Al Prato stop, which is closest to Design Campus in Calenzano.
Popular Routes
- Figline Valdarno to Poggio A Caiano
- Pisa to Villafranca In Lunigiana
- Barberino Val D'Elsa to Scandicci
- Pisa to Scarperia
- Florence to Gambassi Terme
- Florence Santa Maria Novella to Camaiore
- Pistoia to Scandicci
- Bibbona to Lucca
- Florence Santa Maria Novella to Santa Maria Nuova
- Contea-Londa to Pelago
- Chiesanuova to Scandicci
- Florence Rifredi to Santa Maria Nuova Hospital
- Closed to Radicofani
- Capraia e Limite to Lastra A Signa
- Abbadia San Salvatore to Pienza
- Manciano to Arcidosso
- Scarlino to Barberino Di Mugello
- Florence to Poggibonsi
- Florence to Tavarnelle Val Di Pesa
- Viareggio to Ponte Buggianese