How to get from Sansovino to Design Campus by bus and light rail?

From Sansovino to Design Campus by bus and light rail

To get from Sansovino to Design Campus in Calenzano, take the T1 light rail from Sansovino station to Porta Al Prato-Leopolda station. Next, take the 57 bus from Porte Nuove Belfiore station to Pertini Tigli station. The total trip duration for this route is approximately 1 hr 7 min. The ride fare is €1.70.

67min€1.70
Light Rail - T1
Bus - 5757
Walk to Design Campus
Leaves from Sansovino

Step by Step

  • 1
    Start from light rail station
    Start from light rail station
    Sansovino
  • 2
    Light Rail - T1
    Wait for light rail
    T1
    Ospedale
  • 3
    Ride to light rail station
    Ride to light rail station
    Porta Al Prato-Leopolda
    ID FM9026
    5 min
  • 4
    Walk to bus station
    Walk to bus station
    Porte Nuove Belfiore
    ID FI0126
    410 m • 6 min
  • 5
    Bus - 5757
    Wait for bus
    57
    Calenzano Universita'
  • 6
    Ride to bus station
    Ride to bus station
    Pertini Tigli
    ID FM8835
    49 min
  • 7
    Walk to Design Campus
    Walk to
    Design Campus
    Via Sandro Pertini
    140 m • 2 min
*Duration based on 8am traffic

Alternative route from Sansovino to Design Campus by bus and light rail via T1, 301 A and 2

To get from Sansovino to Design Campus in Calenzano, you’ll need to take one light rail line and 2 bus lines: take the T1 light rail from Sansovino station to Strozzi - Fallaci station. Next, you’ll have to switch to the 301 A bus and finally take the 2 bus from Vittorio Emanuele Casello A1 station to Puccini Del Lago station. The total trip duration for this route is approximately 1 hr 3 min.

63min
Light Rail - T1
Bus - 301 A301 A
Bus - 22
Walk to Design Campus
Leaves from Sansovino

Step by Step

  • 1
    Start from light rail station
    Start from light rail station
    Sansovino
  • 2
    Light Rail - T1
    Wait for light rail
    T1
    Ospedale
  • 3
    Ride to light rail station
    Ride to light rail station
    Strozzi - Fallaci
    ID FM9030
    16 min
  • 4
    Walk to bus station
    Walk to bus station
    Fortezza T1 Strozzi
    ID FI8808
    70 m • 1 min
  • 5
    Bus - 301 A301 A
    Wait for bus
    301 A
    Barberino Piazza Cavour
  • 6
    Ride to bus station
    Ride to bus station
    Vittorio Emanuele Casello A1
    ID CAL082
    20 min
  • 7
    Bus - 22
    Wait for bus
    2
    Calenzano
  • 8
    Ride to bus station
    Ride to bus station
    Puccini Del Lago
    ID CAL164
    8 min
  • 9
    Walk to Design Campus
    Walk to
    Design Campus
    Via Sandro Pertini
    290 m • 4 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Florence.
All local mobility options in one app

Public transit directions from Sansovino to Design Campus

The distance between Sansovino, Calenzano and Design Campus, Calenzano is approximately 18.33 km, which can typically be travelled in 67 min. Moovit will show you the directions from Sansovino to Design Campus by bus and light rail, so no matter how you choose to travel in Calenzano – you will always have plenty of easy options.

Public transit stations close to Sansovino

Sansovino is located at Sansovino, Calenzano and the nearest public transit station is Sansovino.

Bus stations close to Sansovino:

  • Francavilla
  • Piazza Batoni
  • Vanni Rosso Fiorentino

Public transit stations close to Design Campus, Calenzano

Design Campus is located at Via Sandro Pertini, Calenzano and the nearest public transit station is Calenzano Parco Della Resistenza.

Train stations close to Design Campus:

  • Il Neto
  • Prato Centrale
  • Calenzano

Bus stations close to Design Campus:

  • Calenzano Parco Della Resistenza
  • Puccini 06
  • Puccini Del Pino

Related Routes

Alternative route from Sansovino to Design Campus by bus and light rail via T1, 301 A and 2

To get from Sansovino to Design Campus in Calenzano, you’ll need to take one light rail line and 2 bus lines: take the T1 light rail from Sansovino station to Strozzi - Fallaci station. Next, you’ll have to switch to the 301 A bus and finally take the 2 bus from Vittorio Emanuele Casello A1 station to Puccini Del Lago station. The total trip duration for this route is approximately 1 hr 3 min.

63min
Light Rail - T1
Bus - 301 A301 A
Bus - 22
Walk to Design Campus
Leaves from Sansovino

Step by Step

  • 1
    Start from light rail station
    Start from light rail station
    Sansovino
  • 2
    Light Rail - T1
    Wait for light rail
    T1
    Ospedale
  • 3
    Ride to light rail station
    Ride to light rail station
    Strozzi - Fallaci
    ID FM9030
    16 min
  • 4
    Walk to bus station
    Walk to bus station
    Fortezza T1 Strozzi
    ID FI8808
    70 m • 1 min
  • 5
    Bus - 301 A301 A
    Wait for bus
    301 A
    Barberino Piazza Cavour
  • 6
    Ride to bus station
    Ride to bus station
    Vittorio Emanuele Casello A1
    ID CAL082
    20 min
  • 7
    Bus - 22
    Wait for bus
    2
    Calenzano
  • 8
    Ride to bus station
    Ride to bus station
    Puccini Del Lago
    ID CAL164
    8 min
  • 9
    Walk to Design Campus
    Walk to
    Design Campus
    Via Sandro Pertini
    290 m • 4 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Sansovino to Design Campus?

    The fastest way takes 67 minutes, using Light Rail line T1, Bus line 57.

  • What is the alternative route to get from Sansovino to Design Campus?

    The alternative route takes 63 minutes, using Light Rail line T1, Bus line 301 A, Bus line 2.

  • Is there a direct light rail between Sansovino and Design Campus?

    No, you’ll have to take one light rail line and one bus line in total. The total travelling time is 1 hr 7 min.

  • Which light rail line goes from Sansovino to Design Campus?

    The T1 light rail line goes from Ospedale station near Sansovino in Firenze to Porta Al Prato-Leopolda station. From there you’ll have to take one bus line till Porta Al Prato-Leopolda station near Design Campus in Calenzano.

  • How long does it take to travel from Sansovino to Design Campus by light rail and bus?

    The total travel time between Sansovino in Firenze and Design Campus in Calenzano by light rail and bus is about 1 hr 7 min.

  • Where do I get on the light rail near Sansovino to get to Design Campus?

    Get on the T1 light rail from the Ospedale station near Sansovino in Firenze.

  • Where do I get off the light rail when travelling between Sansovino and Design Campus?

    Get off the light rail at the Porta Al Prato-Leopolda stop, which is closest to Design Campus in Calenzano.

  • When is the first bus from Sansovino to Design Campus?

    The first bus from Sansovino in Firenze to Design Campus in Calenzano is T2 Belfiore - Calenzano Università. It leaves the Porte Nuove Belfiore stop at 1:37 AM.

  • How much is the light rail fare from Sansovino to Design Campus?

    The ride from Sansovino to Design Campus costs €1.70.

Popular Routes