The Most Popular Urban Mobility App in Florence.
All local mobility options in one app
How to get from Sansovino to Design Campus by bus and light rail?
From Sansovino to Design Campus by bus and light rail
To get from Sansovino to Design Campus in Calenzano, you’ll need to take one light rail line and 2 bus lines: take the T1 light rail from Sansovino station to Porta Al Prato-Leopolda station. Next, you’ll have to switch to the 35 bus and finally take the 57 bus from Puccini Manifattura station to Pertini Tigli station. The total trip duration for this route is approximately 57 min. The ride fare is €1.70.
57min€1.70
3557
Leaves from Sansovino
Step by Step
- 1
Start from light rail stationSansovino - 2Wait for light railT1Careggi
- 3
Ride to light rail stationPorta Al Prato-LeopoldaID FM90265 min - 4Walk to bus stationLeopolda Porta Al PratoID FI7217140 m • 2 min
- 535Wait for bus35Indicatore
- 6Ride to bus stationPiazza PucciniID FI01175 min
- 7Walk to bus stationPuccini ManifatturaID FI184890 m • 2 min
- 857Wait for bus57Calenzano Universita'
- 9Ride to bus stationPertini TigliID FM883540 min
- 10Walk toDesign CampusVia Sandro Pertini140 m • 2 min
*Duration based on 8am traffic
Alternative route from Sansovino to Design Campus by bus and light rail via T1 and 2
To get from Sansovino to Design Campus in Calenzano, take the T1 light rail from Sansovino station to Morgagni-Universita station. Next, take the 2 bus from Santo Stefano In Pane station to Puccini Del Lago station. The total trip duration for this route is approximately 1 hr 7 min. The ride fare is €1.70.
67min€1.70
2Leaves from Sansovino
Step by Step
- 1Start from light rail stationSansovino
- 2Wait for light railT1Careggi
- 3Ride to light rail stationMorgagni-UniversitaID FM903626 min
- 4Walk to bus stationSanto Stefano In PaneID FI0702270 m • 4 min
- 52Wait for bus2Calenzano
- 6Ride to bus stationPuccini Del LagoID CAL16431 min
- 7Walk toDesign CampusVia Sandro Pertini240 m • 4 min
*Duration based on 8am traffic
Public transit directions from Sansovino to Design Campus
The distance between Sansovino, Calenzano and Design Campus, Calenzano is approximately 19.27 km, which can typically be travelled in 57 min. Moovit will show you the directions from Sansovino to Design Campus by bus and light rail, so no matter how you choose to travel in Calenzano – you will always have plenty of easy options.
Public transit stations close to Sansovino
Sansovino is located at Sansovino, Calenzano and the nearest public transit station is Batoni.
Bus stations close to Sansovino:
- Piazza Batoni
- Pollaiolo Ammannati
- Torcicoda Azalee
Public transit stations close to Design Campus, Calenzano
Design Campus is located at Via Sandro Pertini, Calenzano and the nearest public transit station is Calenzano Università .
Train stations close to Design Campus:
- Pratignone
- Il Neto
- Calenzano
Bus stations close to Design Campus:
- Calenzano UniversitÃ
- Pertini Tigli
- Pertini UniversitÃ
Related Routes
- Stazione FS Querceta to Design Campus
- Colle Di Malamerenda to Design Campus
- Baracca Gori to Design Campus
- V. Antonelli Bv Fornaci -> Candeglia to Design Campus
- I Gigli to Design Campus
- Pistoia Piazza Dante to Design Campus
- Via Circonvallazione, 118 to Design Campus
- Viale Dei Mille 15 to Design Campus
- Colonna San Marco to Design Campus
- Lo Stellino to Design Campus
- Montespecchio to Design Campus
- Galliano to Design Campus
- Nave to Design Campus
- Stazione Nazionale to Design Campus
- Togliatti to Design Campus
- Via Del Ghirlandaio to Design Campus
- Arnolfo Orcagna to Design Campus
- Sella Campofiore to Design Campus
- Firenze Autostazione to Design Campus
- T1 Porta Al Prato - Leopolda to Design Campus
Alternative route from Sansovino to Design Campus by bus and light rail via T1 and 2
To get from Sansovino to Design Campus in Calenzano, take the T1 light rail from Sansovino station to Morgagni-Universita station. Next, take the 2 bus from Santo Stefano In Pane station to Puccini Del Lago station. The total trip duration for this route is approximately 1 hr 7 min. The ride fare is €1.70.
67min€1.70
2Leaves from Sansovino
Step by Step
- 1Start from light rail stationSansovino
- 2Wait for light railT1Careggi
- 3Ride to light rail stationMorgagni-UniversitaID FM903626 min
- 4Walk to bus stationSanto Stefano In PaneID FI0702270 m • 4 min
- 52Wait for bus2Calenzano
- 6Ride to bus stationPuccini Del LagoID CAL16431 min
- 7Walk toDesign CampusVia Sandro Pertini240 m • 4 min
*Duration based on 8am traffic
Questions & Answers
What is the fastest way to get from Sansovino to Design Campus?
The fastest way takes 57 minutes, using Bus line T1, Bus line 35, Bus line 57.
What is the alternative route to get from Sansovino to Design Campus?
The alternative route takes 67 minutes, using Bus line T1, Bus line 2.
Is there a direct light rail between Sansovino and Design Campus?
No, you’ll have to take one light rail line and 2 bus lines in total. The total travelling time is 57 min.
Which light rail line goes from Sansovino to Design Campus?
The T1 light rail line goes from Careggi station near Sansovino in Firenze to Porta Al Prato-Leopolda station. From there you’ll have to take 2 bus lines till Porta Al Prato-Leopolda station near Design Campus in Calenzano.
How long does it take to travel from Sansovino to Design Campus by light rail and bus?
The total travel time between Sansovino in Firenze and Design Campus in Calenzano by light rail and bus is about 57 min.
Where do I get on the light rail near Sansovino to get to Design Campus?
Get on the T1 light rail from the Careggi station near Sansovino in Firenze.
Where do I get off the light rail when travelling between Sansovino and Design Campus?
Get off the light rail at the Porta Al Prato-Leopolda stop, which is closest to Design Campus in Calenzano.
How much is the light rail fare from Sansovino to Design Campus?
The ride from Sansovino to Design Campus costs €1.70.