How to get from Canova Santa Maria a Cintoia to Design Campus by bus and light rail?

From Canova Santa Maria a Cintoia to Design Campus by bus and light rail

To get from Canova Santa Maria a Cintoia to Design Campus in Calenzano, you’ll need to take 2 bus lines and one light rail line: take the 77 bus from Canova Nigetti station to Foggini Baccio Da Montelupo station. Next, you’ll have to switch to the T1 light rail and finally take the 57 bus from Porte Nuove Belfiore station to Pertini Lindens station. The total trip duration for this route is approximately 1 hr 21 min. The ride fare is €1.70. The bus and light rail schedule from Canova Santa Maria a Cintoia may change. We recommend you check the updated bus and light rail schedule to Design Campus on the Moovit app.

81min€1.70
Walk to bus station
Bus - 7777
Light Rail - T1
Bus - 5757
Walk to Design Campus
Leaves from Canova Nigetti

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Canova Nigetti
    ID FI0058
    60 m • 1 min
  • 2
    Bus - 7777
    Wait for bus
    77
    Foggini Baccio Da Montelupo
  • 3
    Ride to bus station
    Ride to bus station
    Foggini Baccio Da Montelupo
    ID FI1818
    7 min
  • 4
    Walk to light rail station
    Walk to light rail station
    Federiga
    ID FM9014
    80 m • 1 min
  • 5
    Light Rail - T1
    Wait for light rail
    T1
    Hospital
  • 6
    Ride to light rail station
    Ride to light rail station
    Porta Al Prato-Leopolda
    ID FM9026
    8 min
  • 7
    Walk to bus station
    Walk to bus station
    Porte Nuove Belfiore
    ID FI0126
    410 m • 6 min
  • 8
    Bus - 5757
    Wait for bus
    57
    Calenzano University
  • 9
    Ride to bus station
    Ride to bus station
    Pertini Lindens
    ID CAL835
    42 min
  • 10
    Walk to Design Campus
    Walk to
    Design Campus
    Sandro Pertini Street
    140 m • 2 min
*Duration based on 8am traffic

Alternative route from Canova Santa Maria a Cintoia to Design Campus by bus and light rail via 9, T1 and 57

To get from Canova Santa Maria a Cintoia to Design Campus in Calenzano, you’ll need to take 2 bus lines and one light rail line: take the 9 bus from Canova Santa Maria a Cintoia station to Batoni Square station. Next, you’ll have to switch to the T1 light rail and finally take the 57 bus from Porte Nuove Belfiore station to Pertini Lindens station. The total trip duration for this route is approximately 1 hr 29 min. The ride fare is €1.70. The bus and light rail schedule from Canova Santa Maria a Cintoia may change. We recommend you check the updated bus and light rail schedule to Design Campus on the Moovit app.

89min€1.70
Walk to bus station
Bus - 99
Light Rail - T1
Bus - 5757
Walk to Design Campus
Leaves from Canova Santa Maria a Cintoia

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Canova Santa Maria a Cintoia
    ID FI0045
    20 m • 1 min
  • 2
    Bus - 99
    Wait for bus
    9
    Batoni Square
  • 3
    Ride to bus station
    Ride to bus station
    Batoni Square
    ID FI0027
    10 min
  • 4
    Walk to light rail station
    Walk to light rail station
    Batoni
    ID FM9018
    80 m • 2 min
  • 5
    Light Rail - T1
    Wait for light rail
    T1
    Hospital
  • 6
    Ride to light rail station
    Ride to light rail station
    Porta Al Prato-Leopolda
    ID FM9026
    5 min
  • 7
    Walk to bus station
    Walk to bus station
    Porte Nuove Belfiore
    ID FI0126
    410 m • 6 min
  • 8
    Bus - 5757
    Wait for bus
    57
    Calenzano University
  • 9
    Ride to bus station
    Ride to bus station
    Pertini Lindens
    ID CAL835
    42 min
  • 10
    Walk to Design Campus
    Walk to
    Design Campus
    Sandro Pertini Street
    140 m • 2 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Florence.
All local mobility options in one app

Public transit directions from Canova Santa Maria a Cintoia to Design Campus

The distance between Canova Santa Maria a Cintoia, Calenzano and Design Campus, Calenzano is approximately 21.77 km, which can typically be travelled in 81 min. Moovit will show you the directions from Canova Santa Maria a Cintoia to Design Campus by bus and light rail, so no matter how you choose to travel in Calenzano – you will always have plenty of easy options.

Bus And Light Rail schedule from Canova Santa Maria a Cintoia to Design Campus

To check the bus and light rail schedule from Canova Santa Maria a Cintoia to Design Campus using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Canova Santa Maria a Cintoia) and destination (Design Campus), then select the desired date and time of travel. Moovit will show all available bus and light rail routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and light rail, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and light rail schedules.

Related Routes

Alternative route from Canova Santa Maria a Cintoia to Design Campus by bus and light rail via 9, T1 and 57

To get from Canova Santa Maria a Cintoia to Design Campus in Calenzano, you’ll need to take 2 bus lines and one light rail line: take the 9 bus from Canova Santa Maria a Cintoia station to Batoni Square station. Next, you’ll have to switch to the T1 light rail and finally take the 57 bus from Porte Nuove Belfiore station to Pertini Lindens station. The total trip duration for this route is approximately 1 hr 29 min. The ride fare is €1.70. The bus and light rail schedule from Canova Santa Maria a Cintoia may change. We recommend you check the updated bus and light rail schedule to Design Campus on the Moovit app.

89min€1.70
Walk to bus station
Bus - 99
Light Rail - T1
Bus - 5757
Walk to Design Campus
Leaves from Canova Santa Maria a Cintoia

Step by Step

  • 1
    Walk to bus station
    Walk to bus station
    Canova Santa Maria a Cintoia
    ID FI0045
    20 m • 1 min
  • 2
    Bus - 99
    Wait for bus
    9
    Batoni Square
  • 3
    Ride to bus station
    Ride to bus station
    Batoni Square
    ID FI0027
    10 min
  • 4
    Walk to light rail station
    Walk to light rail station
    Batoni
    ID FM9018
    80 m • 2 min
  • 5
    Light Rail - T1
    Wait for light rail
    T1
    Hospital
  • 6
    Ride to light rail station
    Ride to light rail station
    Porta Al Prato-Leopolda
    ID FM9026
    5 min
  • 7
    Walk to bus station
    Walk to bus station
    Porte Nuove Belfiore
    ID FI0126
    410 m • 6 min
  • 8
    Bus - 5757
    Wait for bus
    57
    Calenzano University
  • 9
    Ride to bus station
    Ride to bus station
    Pertini Lindens
    ID CAL835
    42 min
  • 10
    Walk to Design Campus
    Walk to
    Design Campus
    Sandro Pertini Street
    140 m • 2 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Canova Santa Maria a Cintoia to Design Campus?

    The fastest way takes 81 minutes, using Bus line 77, Light Rail line Leonardo | Villa Costanza - Careggi Hospital, Bus line T2 Belfiore - Calenzano University.

  • What is the alternative route to get from Canova Santa Maria a Cintoia to Design Campus?

    The alternative route takes 89 minutes, using Bus line 9, Light Rail line Leonardo | Villa Costanza - Careggi Hospital, Bus line T2 Belfiore - Calenzano University.

  • Is there a direct bus between Canova Santa Maria a Cintoia and Design Campus?

    No, you’ll have to take 2 bus lines and one light rail line in total. The total travelling time is 1 hr 21 min.

  • Which bus line goes from Canova Santa Maria a Cintoia to Design Campus?

    The 77 bus line goes from Canova Nigetti station near Canova Santa Maria a Cintoia in Florence to Foggini Baccio Da Montelupo station. From there you’ll have to take one bus line and one light rail line till Foggini Baccio Da Montelupo station near Design Campus in Calenzano.

  • How long does it take to travel from Canova Santa Maria a Cintoia to Design Campus by bus and light rail?

    The total travel time between Canova Santa Maria a Cintoia in Florence and Design Campus in Calenzano by bus and light rail is about 1 hr 21 min.

  • Where do I get on the bus near Canova Santa Maria a Cintoia to get to Design Campus?

    Get on the 77 bus from the Canova Nigetti stop near Canova Santa Maria a Cintoia in Florence.

  • Where do I get off the bus when travelling between Canova Santa Maria a Cintoia and Design Campus?

    Get off the bus at the Foggini Baccio Da Montelupo stop, which is closest to Design Campus in Calenzano.

  • How much is the total bus and light rail fare from Canova Santa Maria a Cintoia to Design Campus?

    The ride from Canova Santa Maria a Cintoia to Design Campus costs €1.70.

Popular Routes