How to get from Antella Ponte A Niccheri to Design Campus by bus?

From Antella Ponte A Niccheri to Design Campus by bus

To get from Antella Ponte A Niccheri to Design Campus in Calenzano, you’ll need to take 3 bus lines: take the 32 bus from Antella Ponte A Niccheri station to XXVII April San Zanobi station. Next, you’ll have to switch to the 23 bus and finally take the 57 bus from Porte Nuove Belfiore station to Pertini Lindens station. The total trip duration for this route is approximately 1 hr 29 min. The ride fare is €1.70. The bus schedule from Antella Ponte A Niccheri may change. We recommend you check the updated bus schedule to Design Campus on the Moovit app.

89min€1.70
Bus - 3232
Bus - 2323
Bus - 5757
Walk to Design Campus
Leaves from Antella Ponte A Niccheri

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Antella Ponte A Niccheri
  • 2
    Bus - 3232
    Wait for bus
    32
    Montelungo Station
  • 3
    Ride to bus station
    Ride to bus station
    XXVII April San Zanobi
    ID FI0131
    26 min
  • 4
    Bus - 2323
    Wait for bus
    23
    Florence T2 Guidoni
  • 5
    Ride to bus station
    Ride to bus station
    Porte Nuove Belfiore
    ID FI0126
    7 min
  • 6
    Bus - 5757
    Wait for bus
    57
    Calenzano University
  • 7
    Ride to bus station
    Ride to bus station
    Pertini Lindens
    ID CAL835
    42 min
  • 8
    Walk to Design Campus
    Walk to
    Design Campus
    Sandro Pertini Street
    140 m • 2 min
*Duration based on 8am traffic

Alternative route from Antella Ponte A Niccheri to Design Campus by bus via 32, 17 and 57

To get from Antella Ponte A Niccheri to Design Campus in Calenzano, you’ll need to take 3 bus lines: take the 32 bus from Antella Ponte A Niccheri station to Segni station. Next, you’ll have to switch to the 17 bus and finally take the 57 bus from Porte Nuove Belfiore station to Pertini Lindens station. The total trip duration for this route is approximately 1 hr 29 min. The ride fare is €1.70. The bus schedule from Antella Ponte A Niccheri may change. We recommend you check the updated bus schedule to Design Campus on the Moovit app.

89min€1.70
Bus - 3232
Bus - 1717
Bus - 5757
Walk to Design Campus
Leaves from Antella Ponte A Niccheri

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Antella Ponte A Niccheri
  • 2
    Bus - 3232
    Wait for bus
    32
    Montelungo Station
  • 3
    Ride to bus station
    Ride to bus station
    Segni
    ID FI0322
    21 min
  • 4
    Bus - 1717
    Wait for bus
    17
    Cascine Kennedy Square
  • 5
    Ride to bus station
    Ride to bus station
    Porte Nuove Belfiore
    ID FI0126
    14 min
  • 6
    Bus - 5757
    Wait for bus
    57
    Calenzano University
  • 7
    Ride to bus station
    Ride to bus station
    Pertini Lindens
    ID CAL835
    42 min
  • 8
    Walk to Design Campus
    Walk to
    Design Campus
    Sandro Pertini Street
    140 m • 2 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Florence.
All local mobility options in one app

Public transit directions from Antella Ponte A Niccheri to Design Campus

The distance between Antella Ponte A Niccheri, Calenzano and Design Campus, Calenzano is approximately 28.02 km, which can typically be travelled in 89 min. Moovit will show you the directions from Antella Ponte A Niccheri to Design Campus by bus, so no matter how you choose to travel in Calenzano – you will always have plenty of easy options.

Bus schedule from Antella Ponte A Niccheri to Design Campus

To check the bus schedule from Antella Ponte A Niccheri to Design Campus using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Antella Ponte A Niccheri) and destination (Design Campus), then select the desired date and time of travel. Moovit will show all available bus routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus schedules.

Related Routes

Alternative route from Antella Ponte A Niccheri to Design Campus by bus via 32, 17 and 57

To get from Antella Ponte A Niccheri to Design Campus in Calenzano, you’ll need to take 3 bus lines: take the 32 bus from Antella Ponte A Niccheri station to Segni station. Next, you’ll have to switch to the 17 bus and finally take the 57 bus from Porte Nuove Belfiore station to Pertini Lindens station. The total trip duration for this route is approximately 1 hr 29 min. The ride fare is €1.70. The bus schedule from Antella Ponte A Niccheri may change. We recommend you check the updated bus schedule to Design Campus on the Moovit app.

89min€1.70
Bus - 3232
Bus - 1717
Bus - 5757
Walk to Design Campus
Leaves from Antella Ponte A Niccheri

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Antella Ponte A Niccheri
  • 2
    Bus - 3232
    Wait for bus
    32
    Montelungo Station
  • 3
    Ride to bus station
    Ride to bus station
    Segni
    ID FI0322
    21 min
  • 4
    Bus - 1717
    Wait for bus
    17
    Cascine Kennedy Square
  • 5
    Ride to bus station
    Ride to bus station
    Porte Nuove Belfiore
    ID FI0126
    14 min
  • 6
    Bus - 5757
    Wait for bus
    57
    Calenzano University
  • 7
    Ride to bus station
    Ride to bus station
    Pertini Lindens
    ID CAL835
    42 min
  • 8
    Walk to Design Campus
    Walk to
    Design Campus
    Sandro Pertini Street
    140 m • 2 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Antella Ponte A Niccheri to Design Campus?

    The fastest way takes 89 minutes, using Bus line 32, Bus line T2 Guidoni - Sorgane/Bagno A Ripoli, Bus line T2 Belfiore - Calenzano University.

  • What is the alternative route to get from Antella Ponte A Niccheri to Design Campus?

    The alternative route takes 89 minutes, using Bus line 32, Bus line Viale Verga - Via Boito/Cascine, Bus line T2 Belfiore - Calenzano University.

  • Is there a direct bus between Antella Ponte A Niccheri and Design Campus?

    No, you’ll have to take 3 bus lines in total. The total travelling time is 1 hr 29 min.

  • Which bus line goes from Antella Ponte A Niccheri to Design Campus?

    The 32 bus line goes from Montelungo Station station near Antella Ponte A Niccheri in Bagno a Ripoli to XXVII April San Zanobi station. From there you’ll have to take one bus line till XXVII April San Zanobi station near Design Campus in Calenzano.

  • How long does it take to travel from Antella Ponte A Niccheri to Design Campus by bus?

    The total travel time between Antella Ponte A Niccheri in Bagno a Ripoli and Design Campus in Calenzano by bus is about 1 hr 29 min.

  • Where do I get on the bus near Antella Ponte A Niccheri to get to Design Campus?

    Get on the 32 bus from the Montelungo Station stop near Antella Ponte A Niccheri in Bagno a Ripoli.

  • Where do I get off the bus when travelling between Antella Ponte A Niccheri and Design Campus?

    Get off the bus at the XXVII April San Zanobi stop, which is closest to Design Campus in Calenzano.

  • How much is the bus fare from Antella Ponte A Niccheri to Design Campus?

    The ride from Antella Ponte A Niccheri to Design Campus costs €1.70.

Popular Routes