How to get from San Rocco a Pilli to Design Campus by bus?

From San Rocco a Pilli to Design Campus by bus

To get from San Rocco a Pilli to Design Campus in Calenzano, you’ll need to take 3 bus lines: take the S30 bus from San Rocco a Pilli station to Nazario Sauro station. Next, you’ll have to switch to the 131R bus and finally take the 57 bus from Porte Nuove Belfiore station to Pertini Lindens station. The total trip duration for this route is approximately 2 hr 51 min. The bus schedule from San Rocco a Pilli may change. We recommend you check the updated bus schedule to Design Campus on the Moovit app.

171min
Bus - S30S30
Bus - 131R131R
Bus - 5757
Walk to Design Campus
Leaves from San Rocco a Pilli

Step by Step

  • 1
    Start from bus station
    Start from bus station
    San Rocco a Pilli
  • 2
    Bus - S30S30
    Wait for bus
    S30
    Tozzi Street
  • 3
    Ride to bus station
    Ride to bus station
    Nazario Sauro
    ID SI0373
    30 min
  • 4
    Walk to bus station
    Walk to bus station
    Nazario Sauro
    ID SI0275
    20 m • 1 min
  • 5
    Bus - 131R131R
    Wait for bus
    131R
    Florence Bus Station
  • 6
    Ride to bus station
    Ride to bus station
    Leopolda T1 Porta Al Prato
    ID FI5751
    74 min
  • 7
    Walk to bus station
    Walk to bus station
    Porte Nuove Belfiore
    ID FI0126
    320 m • 5 min
  • 8
    Bus - 5757
    Wait for bus
    57
    Calenzano University
  • 9
    Ride to bus station
    Ride to bus station
    Pertini Lindens
    ID CAL835
    44 min
  • 10
    Walk to Design Campus
    Walk to
    Design Campus
    Sandro Pertini Street
    140 m • 2 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Florence.
All local mobility options in one app

Public transit directions from San Rocco a Pilli to Design Campus

The distance between San Rocco a Pilli, Calenzano and Design Campus, Calenzano is approximately 96.43 km, which can typically be travelled in 171 min. Moovit will show you the directions from San Rocco a Pilli to Design Campus by bus, so no matter how you choose to travel in Calenzano – you will always have plenty of easy options.

Bus schedule from San Rocco a Pilli to Design Campus

To check the bus schedule from San Rocco a Pilli to Design Campus using the Moovit app, first download and open the app on your smartphone. Enter your starting point (San Rocco a Pilli) and destination (Design Campus), then select the desired date and time of travel. Moovit will show all available bus routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus schedules.

Related Routes

Questions & Answers

  • What is the fastest way to get from San Rocco a Pilli to Design Campus?

    The fastest way takes 171 minutes, using Bus line S30, Bus line 131R, Bus line 57.

  • Is there a direct bus between San Rocco a Pilli and Design Campus?

    No, you’ll have to take 3 bus lines in total. The total travelling time is 2 hr 51 min.

  • Which bus line goes from San Rocco a Pilli to Design Campus?

    The S30 bus line goes from Nazario Sauro station near San Rocco a Pilli in Sovicille to Nazario Sauro station. From there you’ll have to take one bus line till Nazario Sauro station near Design Campus in Calenzano.

  • How long does it take to travel from San Rocco a Pilli to Design Campus by bus?

    The total travel time between San Rocco a Pilli in Sovicille and Design Campus in Calenzano by bus is about 2 hr 51 min.

  • Where do I get on the bus near San Rocco a Pilli to get to Design Campus?

    Get on the S30 bus from the Nazario Sauro stop near San Rocco a Pilli in Sovicille.

  • Where do I get off the bus when travelling between San Rocco a Pilli and Design Campus?

    Get off the bus at the Nazario Sauro stop, which is closest to Design Campus in Calenzano.

Popular Routes