How to get from Borgo San Iacopo to Design Lab by bus and light rail?

From Borgo San Iacopo to Design Lab by bus and light rail

To get from Borgo San Iacopo to Design Lab in Scandicci, take the C3 bus from Borgo San Iacopo station to Leopolda T1 Porta Al Prato station. Next, take the T1 light rail from Porta Al Prato-Leopolda station to Resistance station. The total trip duration for this route is approximately 30 min. The ride fare is €2.00. The bus and light rail schedule from Borgo San Iacopo may change. We recommend you check the updated bus and light rail schedule to Design Lab on the Moovit app.

30min€2.00
Bus - C3C3
Light Rail - T1
Walk to Design Lab
Leaves from Borgo San Iacopo

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Borgo San Iacopo
  • 2
    Bus - C3C3
    Wait for bus
    C3
    Leopolda T1 Porta Al Prato
  • 3
    Ride to bus station
    Ride to bus station
    Leopolda T1 Porta Al Prato
    ID FI5751
    9 min
  • 4
    Walk to light rail station
    Walk to light rail station
    Porta Al Prato-Leopolda
    ID FM9026
    70 m • 1 min
  • 5
    Light Rail - T1
    Wait for light rail
    T1
    Villa Costanza
  • 6
    Ride to light rail station
    Ride to light rail station
    Resistance
    ID FM9005
    14 min
  • 7
    Walk to Design Lab
    Walk to
    Design Lab
    Galileo Galilei Street
    290 m • 4 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Florence.
All local mobility options in one app

Public transit directions from Borgo San Iacopo to Design Lab

The distance between Borgo San Iacopo, Scandicci and Design Lab, Scandicci is approximately 8.33 km, which can typically be travelled in 30 min. Moovit will show you the directions from Borgo San Iacopo to Design Lab by bus and light rail, so no matter how you choose to travel in Scandicci – you will always have plenty of easy options.

Bus And Light Rail schedule from Borgo San Iacopo to Design Lab

To check the bus and light rail schedule from Borgo San Iacopo to Design Lab using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Borgo San Iacopo) and destination (Design Lab), then select the desired date and time of travel. Moovit will show all available bus and light rail routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus and light rail, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus and light rail schedules.

Related Routes

Questions & Answers

  • What is the fastest way to get from Borgo San Iacopo to Design Lab?

    The fastest way takes 30 minutes, using Bus line C3, Light Rail line T1.

  • Is there a direct bus between Borgo San Iacopo and Design Lab?

    No, you’ll have to take one bus line and one light rail line in total. The total travelling time is 30 min.

  • Which bus line goes from Borgo San Iacopo to Design Lab?

    The C3 bus line goes from Leopolda T1 Porta Al Prato station near Borgo San Iacopo in Florence to Porta Al Prato-Leopolda station. From there you’ll have to take one light rail line till Porta Al Prato-Leopolda station near Design Lab in Scandicci.

  • How long does it take to travel from Borgo San Iacopo to Design Lab by bus and light rail?

    The total travel time between Borgo San Iacopo in Florence and Design Lab in Scandicci by bus and light rail is about 30 min.

  • Where do I get on the bus near Borgo San Iacopo to get to Design Lab?

    Get on the C3 bus from the Leopolda T1 Porta Al Prato stop near Borgo San Iacopo in Florence.

  • Where do I get off the bus when travelling between Borgo San Iacopo and Design Lab?

    Get off the bus at the Porta Al Prato-Leopolda station, which is closest to Design Lab in Scandicci.

  • How much is the bus fare from Borgo San Iacopo to Design Lab?

    The ride from Borgo San Iacopo to Design Lab costs €2.00.

Popular Routes