How to get from Lungarno Alle Grazie to Design Lab by bus and light rail?
From Lungarno Alle Grazie to Design Lab by bus and light rail
To get from Lungarno Alle Grazie to Design Lab in Scandicci, take the C3 bus from Dyers Course station to Leopolda T1 Porta Al Prato station. Next, take the T1 light rail from Porta Al Prato-Leopolda station to Resistance station. The total trip duration for this route is approximately 35 min. The ride fare is €2.00. The bus and light rail schedule from Lungarno Alle Grazie may change. We recommend you check the updated bus and light rail schedule to Design Lab on the Moovit app.
Step by Step
- 1Walk to bus stationDyers CourseID FI0571120 m • 2 min
- 2Wait for busC3Leopolda T1 Porta Al Prato
- 3Ride to bus stationLeopolda T1 Porta Al PratoID FI575111 min
- 4Walk to light rail stationPorta Al Prato-LeopoldaID FM902670 m • 1 min
- 5Wait for light railT1Villa Costanza
- 6Ride to light rail stationResistanceID FM900514 min
- 7Walk toDesign LabGalileo Galilei Street290 m • 4 min
Public transit directions from Lungarno Alle Grazie to Design Lab
Bus And Light Rail schedule from Lungarno Alle Grazie to Design Lab
Related Routes
- Calenzano University to Design Lab
- T2 Belfiore to Design Lab
- Marina Di Massa Betti Square to Design Lab
- Pistoia Alighieri Square [Railway Station] to Design Lab
- Old Station to Design Lab
- Le Lupe to Design Lab
- Liberty Pier Capponi to Design Lab
- Liberty San Gallo Gate to Design Lab
- Michelangelo Bastions to Design Lab
- Lavagnini - Poliziano to Design Lab
- Spadolini T1 Strozzi to Design Lab
- Pistoiese Sala to Design Lab
- Impruneta Vittorio Veneto Street to Design Lab
- Sesto Railway Station to Design Lab
- Berlinguer - Pecci Center to Design Lab
- Europe 1 to Design Lab
- Europa 2 to Design Lab
- Martini Street to Design Lab
- Via Ceppo Vecchio to Design Lab
- Bardalone Coop to Design Lab
Questions & Answers
What is the fastest way to get from Lungarno Alle Grazie to Design Lab?
The fastest way takes 35 minutes, using Bus line C3, Light Rail line T1.
Is there a direct bus between Lungarno Alle Grazie and Design Lab?
No, you’ll have to take one bus line and one light rail line in total. The total travelling time is 35 min.
Which bus line goes from Lungarno Alle Grazie to Design Lab?
The C3 bus line goes from Dyers Course station near Lungarno Alle Grazie in Florence to Leopolda T1 Porta Al Prato station. From there you’ll have to take one light rail line till Leopolda T1 Porta Al Prato station near Design Lab in Scandicci.
How long does it take to travel from Lungarno Alle Grazie to Design Lab by bus and light rail?
The total travel time between Lungarno Alle Grazie in Florence and Design Lab in Scandicci by bus and light rail is about 35 min.
Where do I get on the bus near Lungarno Alle Grazie to get to Design Lab?
Get on the C3 bus from the Dyers Course stop near Lungarno Alle Grazie in Florence.
Where do I get off the bus when travelling between Lungarno Alle Grazie and Design Lab?
Get off the bus at the Leopolda T1 Porta Al Prato station, which is closest to Design Lab in Scandicci.
How much is the bus fare from Lungarno Alle Grazie to Design Lab?
The ride from Lungarno Alle Grazie to Design Lab costs €2.00.
Popular Routes
- Florence Santa Maria Novella to Figline Valdarno
- Empoli to Cerreto Guidi
- Florence Rifredi to Engineering Faculty - Santa Marta
- Closed to Lucca
- Scandicci to Altopascio
- Empoli to Pescia
- Florence Rifredi to Empoli
- Prato to Scandicci
- Via Del Lavoro 1 - Barberino to Careggi University Hospital
- Montelupo Fiorentino to Monsummano Terme
- Peccioli to Pistoia
- Prato Central to Meyer
- Careggi - Hospital to Trespiano
- Lucca to Viareggio
- Volterra to San Vincenzo
- Viareggio to Monterotondo Marittimo
- Montecatini-Terme to Monterotondo Marittimo
- Fiesole to Florence
- Poggibonsi to San Vincenzo
- Montepulciano to Pienza