How to get from Balatro Cross to Design Lab by bus and light rail?
From Balatro Cross to Design Lab by bus and light rail
To get from Balatro Cross to Design Lab in Scandicci, you’ll need to take 2 bus lines and one light rail line: take the 24 bus from Balatro Cross station to Antella Ponte A Niccheri station. Next, you’ll have to switch to the 32 bus and finally take the T1 light rail from Strozzi - Fallaci station to Resistance station. The total trip duration for this route is approximately 1 hr 38 min. The ride fare is €2.00. The bus and light rail schedule from Balatro Cross may change. We recommend you check the updated bus and light rail schedule to Design Lab on the Moovit app.
Step by Step
- 1Start from bus stationBalatro Cross
- 2Wait for bus24Grassina Umberto I
- 3Ride to bus stationAntella Ponte A NiccheriID BRP1068 min
- 4Wait for bus32Montelungo Station
- 5Ride to bus stationFortezza T1 StrozziID FI880840 min
- 6Walk to light rail stationStrozzi - FallaciID FM904580 m • 2 min
- 7Wait for light railT1Villa Costanza
- 8Ride to light rail stationResistanceID FM900524 min
- 9Walk toDesign LabGalileo Galilei Street290 m • 4 min
Public transit directions from Balatro Cross to Design Lab
Bus And Light Rail schedule from Balatro Cross to Design Lab
Related Routes
- Calenzano University to Design Lab
- T2 Belfiore to Design Lab
- Marina Di Massa Betti Square to Design Lab
- Pistoia Alighieri Square [Railway Station] to Design Lab
- Old Station to Design Lab
- Le Lupe to Design Lab
- Liberty Pier Capponi to Design Lab
- Liberty San Gallo Gate to Design Lab
- Michelangelo Bastions to Design Lab
- Lavagnini - Poliziano to Design Lab
- Spadolini T1 Strozzi to Design Lab
- Pistoiese Sala to Design Lab
- Impruneta Vittorio Veneto Street to Design Lab
- Sesto Railway Station to Design Lab
- Berlinguer - Pecci Center to Design Lab
- Europe 1 to Design Lab
- Europa 2 to Design Lab
- Martini Street to Design Lab
- Via Ceppo Vecchio to Design Lab
- Bardalone Coop to Design Lab
Questions & Answers
What is the fastest way to get from Balatro Cross to Design Lab?
The fastest way takes 98 minutes, using Bus line 24, Bus line 32, Light Rail line T1.
Is there a direct bus between Balatro Cross and Design Lab?
No, you’ll have to take 2 bus lines and one light rail line in total. The total travelling time is 1 hr 38 min.
Which bus line goes from Balatro Cross to Design Lab?
The 24 bus line goes from Antella Ponte A Niccheri station near Balatro Cross in Bagno a Ripoli to Fortezza T1 Strozzi station. From there you’ll have to take one bus line and one light rail line till Fortezza T1 Strozzi station near Design Lab in Scandicci.
How long does it take to travel from Balatro Cross to Design Lab by bus and light rail?
The total travel time between Balatro Cross in Bagno a Ripoli and Design Lab in Scandicci by bus and light rail is about 1 hr 38 min.
Where do I get on the bus near Balatro Cross to get to Design Lab?
Get on the 24 bus from the Antella Ponte A Niccheri stop near Balatro Cross in Bagno a Ripoli.
Where do I get off the bus when travelling between Balatro Cross and Design Lab?
Get off the bus at the Fortezza T1 Strozzi station, which is closest to Design Lab in Scandicci.
How much is the total bus and light rail fare from Balatro Cross to Design Lab?
The ride from Balatro Cross to Design Lab costs €2.00.
Popular Routes
- Sinalunga to Grosseto
- Figline Valdarno to Poggio A Caiano
- Pontassieve to Florence
- Pieve A Nievole to Marliana
- San Vincenzo to Empoli
- Montecatini-Terme to Scandicci
- Pisa to Capannori
- Lajatico to Pontedera
- Pienza to Florence
- Pisa to Ponsacco
- Prato Central to Vagli Sotto
- Empoli to Pescia
- Pontedera to Roccastrada
- Florence Santa Maria Novella to Villa Dei Pini Care Home
- Florence Santa Maria Novella to Camaiore
- Pontassieve to Siena
- Borgo a Mozzano to Pisa
- Poggibonsi to Florence
- Borgo San Lorenzo to Bagno a Ripoli
- Gambassi Terme to Peccioli