How to get from Malborghetto to Design Lab by bus and light rail?
From Malborghetto to Design Lab by bus and light rail
To get from Malborghetto to Design Lab in Scandicci, take the C3 bus from Agnolo station to Leopolda T1 Porta Al Prato station. Next, take the T1 light rail from Porta Al Prato-Leopolda station to Resistance station. The total trip duration for this route is approximately 36 min. The ride fare is €2.00. The bus and light rail schedule from Malborghetto may change. We recommend you check the updated bus and light rail schedule to Design Lab on the Moovit app.
Step by Step
- 1Walk to bus stationAgnoloID FI061150 m • 1 min
- 2Wait for busC3Leopolda T1 Porta Al Prato
- 3Ride to bus stationLeopolda T1 Porta Al PratoID FI575114 min
- 4Walk to light rail stationPorta Al Prato-LeopoldaID FM902670 m • 1 min
- 5Wait for light railT1Villa Costanza
- 6Ride to light rail stationResistanceID FM900514 min
- 7Walk toDesign LabGalileo Galilei Street290 m • 4 min
Public transit directions from Malborghetto to Design Lab
Bus And Light Rail schedule from Malborghetto to Design Lab
Related Routes
- Calenzano University to Design Lab
- T2 Belfiore to Design Lab
- Marina Di Massa Betti Square to Design Lab
- Pistoia Alighieri Square [Railway Station] to Design Lab
- Old Station to Design Lab
- Le Lupe to Design Lab
- Liberty Pier Capponi to Design Lab
- Liberty San Gallo Gate to Design Lab
- Michelangelo Bastions to Design Lab
- Lavagnini - Poliziano to Design Lab
- Spadolini T1 Strozzi to Design Lab
- Pistoiese Sala to Design Lab
- Impruneta Vittorio Veneto Street to Design Lab
- Sesto Railway Station to Design Lab
- Berlinguer - Pecci Center to Design Lab
- Europe 1 to Design Lab
- Europa 2 to Design Lab
- Martini Street to Design Lab
- Via Ceppo Vecchio to Design Lab
- Bardalone Coop to Design Lab
Questions & Answers
What is the fastest way to get from Malborghetto to Design Lab?
The fastest way takes 36 minutes, using Bus line C3, Light Rail line T1.
Is there a direct bus between Malborghetto and Design Lab?
No, you’ll have to take one bus line and one light rail line in total. The total travelling time is 36 min.
Which bus line goes from Malborghetto to Design Lab?
The C3 bus line goes from Agnolo station near Malborghetto in Florence to Leopolda T1 Porta Al Prato station. From there you’ll have to take one light rail line till Leopolda T1 Porta Al Prato station near Design Lab in Scandicci.
How long does it take to travel from Malborghetto to Design Lab by bus and light rail?
The total travel time between Malborghetto in Florence and Design Lab in Scandicci by bus and light rail is about 36 min.
Where do I get on the bus near Malborghetto to get to Design Lab?
Get on the C3 bus from the Agnolo stop near Malborghetto in Florence.
Where do I get off the bus when travelling between Malborghetto and Design Lab?
Get off the bus at the Leopolda T1 Porta Al Prato station, which is closest to Design Lab in Scandicci.
When is the last bus from Malborghetto to Design Lab?
The last bus from Malborghetto in Florence to Design Lab in Scandicci is the Torregalli - Novelli/gignoro line. It leaves the Mattonaia stop at 12:55 AM.
How much is the bus fare from Malborghetto to Design Lab?
The ride from Malborghetto to Design Lab costs €2.00.
Popular Routes
- Calcinaia to Rosignano Marittimo
- Piancastagnaio to Closed
- Montelupo Fiorentino to Vinci
- Florence Rifredi to Calenzano
- Signa to Sesto Fiorentino
- Brisighella to Marradi
- Impruneta to Piombino
- Piancastagnaio to San Casciano Dei Bagni
- Prato Porta Al Serraglio to Vaiano
- Castelfranco Di Sotto to Santa Croce sull' Arno
- Florence Santa Maria Novella to New Hospital of Prato
- Cortona to Montepulciano
- Asciano to Certaldo
- Sesto Fiorentino to Florence Airport
- Florence Rifredi to Amerigo Vespucci Airport (FLR) (Peretola Airport)
- Florence Santa Maria Novella to New San Giovanni Di Dio Hospital
- Florence Campo di Marte to Santa Croce sull' Arno
- Pisa to Santa Maria A Monte
- Monsummano Terme to Prato
- Firenze Rovezzano to Pontassieve