How to get from Curtatone to Design Lab by light rail?
Curtatone to Design Lab - Light Rail Schedule
The T1 light rail from Curtatone to Design Lab runs from 00:35 to 00:15, with departures every 5 min-4 hr 30 min. The trip takes about 25 min, with regular service throughout the operating hours.
From Curtatone to Design Lab by light rail
Take one direct light rail from Curtatone to Design Lab in Scandicci: take the T1 light rail from Porta Al Prato-Leopolda station to Resistance station. The total trip duration for this route is approximately 25 min. The ride fare is €2.00. The light rail schedule from Curtatone may change. We recommend you check the updated light rail schedule to Design Lab on the Moovit app.
Step by Step
- 1Walk to light rail stationPorta Al Prato-LeopoldaID FM9026570 m • 8 min
- 2Wait for light railT1Villa Costanza
- 3Ride to light rail stationResistanceID FM900514 min
- 4Walk toDesign LabGalileo Galilei Street290 m • 4 min
Public transit directions from Curtatone to Design Lab
Light Rail schedule from Curtatone to Design Lab
Related Routes
- Calenzano University to Design Lab
- T2 Belfiore to Design Lab
- Valgimigli - Marchesi Complex to Design Lab
- Marina Di Massa Betti Square to Design Lab
- Pistoia Alighieri Square [Railway Station] to Design Lab
- Barriera Square to Design Lab
- Old Station to Design Lab
- Le Lupe to Design Lab
- Liberty Pier Capponi to Design Lab
- Liberty San Gallo Gate to Design Lab
- Michelangelo Bastions to Design Lab
- Lavagnini - Poliziano to Design Lab
- Spadolini T1 Strozzi to Design Lab
- Pistoiese Sala to Design Lab
- Impruneta Vittorio Veneto Street to Design Lab
- Sesto Railway Station to Design Lab
- Berlinguer - Pecci Center to Design Lab
- Europa 1 to Design Lab
- Europa 2 to Design Lab
- Martini Street to Design Lab
Questions & Answers
What is the fastest way to get from Curtatone to Design Lab?
The fastest way takes 25 minutes, using light rail line T1.
Is there a direct light rail between Curtatone and Design Lab?
Yes, there’s a direct light rail going from Curtatone in Florence to Design Lab in Scandicci in 25 min.
Which light rail line goes from Curtatone to Design Lab?
The T1 light rail line goes from Porta Al Prato-Leopolda station near Curtatone in Florence to Resistance station near Design Lab in Scandicci.
How long does it take to travel from Curtatone to Design Lab by light rail?
The total travel time between Curtatone in Florence and Design Lab in Scandicci by light rail is about 25 min.
Where do I get on the light rail near Curtatone to get to Design Lab?
Get on the T1 light rail from the Porta Al Prato-Leopolda station near Curtatone in Florence.
Where do I get off the light rail when traveling between Curtatone and Design Lab?
Get off the light rail at the Resistance station, which is closest to Design Lab in Scandicci.
How much is the light rail fare from Curtatone to Design Lab?
The ride from Curtatone to Design Lab costs €2.00.
Popular Routes
- Bagno a Ripoli to Monsummano Terme
- Florence Santa Maria Novella to New San Giovanni Di Dio Hospital
- Grosseto to Roccastrada
- Prato Centrale to Careggi Hospital Helipad
- Florence Campo Di Marte to Careggi University Hospital
- Chiesanuova to Misericordia Del Galluzzo
- Massa Marittima to Prato
- Florence to Foiano Della Chiana
- San Miniato to Fucecchio
- Florence Santa Maria Novella to INAF-Arcetri Astrophysical Observatory
- Cecina to Camaiore
- Magliano In Toscana to Florence
- Campi Bisenzio to Montecatini-Terme
- Montignoso to Camaiore
- Viareggio to Monte San Savino
- Pisa to Impruneta
- Volterra to Empoli
- Calcinaia to Rosignano Marittimo
- Florence Santa Maria Novella to Pisa
- Empoli Railway Station to Vinci