How to get from Pieve San Giacomo to Hydro by bus and train?
From Pieve San Giacomo to Hydro by bus and train
To get from Pieve San Giacomo to Hydro in Milan and Lombardy, you’ll need to take 2 bus lines and one train line: take the Bus bus from Gazzo Pieve San Giacomo station to Piadena, Matteotti Junction Railway station. Next, you’ll have to switch to the R8 train and finally take the LN013 bus from Brescia - Bus Station Via Togni station to Idro - Old Parish station. The total trip duration for this route is approximately 4 hr 12 min. The bus and train schedule from Pieve San Giacomo may change. We recommend you check the updated bus and train schedule to Hydro on the Moovit app.
Step by Step
- 1Walk to bus stationGazzo Pieve San Giacomo10 m • 1 min
- 2Wait for busBusPiadena
- 3Ride to bus stationPiadena, Matteotti Junction RailwayID 511823 min
- 4Walk to train stationPiadena140 m • 2 min
- 5Wait for trainR8Brescia
- 6Ride to train stationBresciaID S0171770 min
- 7Walk to bus stationBrescia - Bus Station Via Togni100 m • 2 min
- 8Wait for busLN013Bagolino
- 9Ride to bus stationIdro - Old Parish77 min
- 10Walk toHydro980 m • 13 min
Public transit directions from Pieve San Giacomo to Hydro
Bus And Train schedule from Pieve San Giacomo to Hydro
Related Routes
- Bagolino to Hydro
- Bovegno to Hydro
- Capovalle to Hydro
- Collio to Hydro
- Gargnano to Hydro
- Lavenone to Hydro
- Limone Sul Garda to Hydro
- Ponte Di Legno to Hydro
- Pertica Bassa to Hydro
- Tremosine to Hydro
- Vestone to Hydro
- Storo to Hydro
- Novazzano to Hydro
- Mendrisio to Hydro
- Lugano to Hydro
- Bagnolo San Vito to Hydro
- Pegognaga to Hydro
- Pieve di Coriano to Hydro
- Poggio Rusco to Hydro
- Revere to Hydro
Questions & Answers
What is the fastest way to get from Pieve San Giacomo to Hydro?
The fastest way takes 252 minutes, using Bus line Bus, Train line R8, Bus line LN013.
Is there a direct bus between Pieve San Giacomo and Hydro in Milan and Lombardy?
No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 4 hr 12 min.
Which bus line goes from Pieve San Giacomo to Hydro in Milan and Lombardy?
The Bus bus line goes from Gazzo Pieve San Giacomo station near Pieve San Giacomo to Piadena, Matteotti Junction Railway station. From there you’ll have to take one bus line and one train line till Piadena, Matteotti Junction Railway station near Hydro in Milan and Lombardy.
How long does it take to travel from Pieve San Giacomo to Hydro in Milan and Lombardy by bus and train?
The total travel time between Pieve San Giacomo and Hydro in Milan and Lombardy by bus and train is about 4 hr 12 min.
Where do I get on the bus near Pieve San Giacomo to get to Hydro in Milan and Lombardy?
Get on the Bus bus from the Gazzo Pieve San Giacomo stop near Pieve San Giacomo in Milan and Lombardy.
Where do I get off the bus when travelling between Pieve San Giacomo and Hydro in Milan and Lombardy?
Get off the bus at the Piadena, Matteotti Junction Railway stop, which is closest to Hydro in Milan and Lombardy.
Popular Routes
- Rho Fair to Milan Linate Airport
- Comezzano-Cizzago to Brescia
- Linate Airport to Bocconi University
- Milan Malpensa Airport (Mxp) to Ferno-Lonate Pozzolo
- Assago Milanofiori Forum to Sesto San Giovanni
- Milan Linate Airport "E. Forlanini" (Lin) to Bovisa
- Sesto San Giovanni to Bergamo Airport
- Milano Porta Garibaldi to Gaetano Pini Hospital
- Rho Fair to Novara
- Saronno to Humanitas Clinical Institute
- Belgirate to Stresa
- Gravedona to Morbegno
- Gessate to San Siro Stadium
- Cadorna FN to San Raffaele Hospital
- Linate Airport to Opera
- Lampugnano to Duomo Square
- Bergamo to San Siro
- Monza to Cologno Monzese
- Milan Linate Airport "E. Forlanini" (Lin) to Niguarda Center
- Milano Porta Garibaldi to Cinisello Balsamo