How to get from Clarksville Park & Ride to Johns Hopkins University by bus, metro and train?

From Clarksville Park & Ride to Johns Hopkins University by bus, metro and train

To get from Clarksville Park & Ride to Johns Hopkins University in Baltimore, you’ll need to take one bus line, one metro line and one train line: take the 335 bus from Clarksville Park & Ride station to Independence Ave & 1st St Se Wb station. Next, you’ll have to switch to the ORANGE metro and finally take the NORTHEAST REGIONAL train from New Carrollton, Md station to Baltimore Penn Station station. The total trip duration for this route is approximately 2 hr 45 min. The ride fare is $3.00. The bus, metro and train schedule from Clarksville Park & Ride may change. We recommend you check the updated bus, metro and train schedule to Johns Hopkins University on the Moovit app.

165min$3.00
Bus - 335335
Metro - ORANGE
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Walk to Johns Hopkins University
Leaves from Clarksville Park & Ride

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Clarksville Park & Ride
  • 2
    Bus - 335335
    Wait for bus
    335
    335/1 Washington Dc
  • 3
    Ride to bus station
    Ride to bus station
    Independence Ave & 1st St Se Wb
    54 min
  • 4
    Walk to metro station
    Walk to metro station
    Capital South
    260 yd • 4 min
  • 5
    Metro - ORANGEORANGE
    Wait for metro
    ORANGE
    New Carrollton
  • 6
    Ride to metro station
    Ride to metro station
    New Carrollton Metro Station
    20 min
  • 7
    Walk to train station
    Walk to train station
    New Carrollton, Md
    20 yd • 1 min
  • 8
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    New York
  • 9
    Ride to train station
    Ride to train station
    Baltimore Penn Station
    34 min
  • 10
    Walk to Johns Hopkins University
    Walk to
    Johns Hopkins University
    1.65 mi • 35 min
*Duration based on 8am traffic

From Clarksville Park & Ride to Johns Hopkins University by bus and train

To get from Clarksville Park & Ride to Johns Hopkins University in Baltimore, you’ll need to take one bus line and 2 train lines: take the 335 bus from Clarksville Park & Ride station to Sw 7th St & Sw Independence Av station. Next, you’ll have to switch to the FREDERICKSBURG LINE train and finally take the MARC train from Union Station station to Baltimore Penn Station station. The total trip duration for this route is approximately 3 hr 5 min. The ride fare is $3.00. The bus, metro and train schedule from Clarksville Park & Ride may change. We recommend you check the updated bus, metro and train schedule to Johns Hopkins University on the Moovit app.

185min$3.00
Bus - 335335
Train - FREDERICKSBURG LINEFREDERICKSBURG LINE
Train - MARCMARC
Walk to Johns Hopkins University
Leaves from Clarksville Park & Ride

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Clarksville Park & Ride
  • 2
    Bus - 335335
    Wait for bus
    335
    335/1 Washington Dc
  • 3
    Ride to bus station
    Ride to bus station
    Sw 7th St & Sw Independence Av
    59 min
  • 4
    Walk to train station
    Walk to train station
    L'Enfant Plaza
    240 yd • 3 min
  • 5
    Train - FREDERICKSBURG LINEFREDERICKSBURG LINE
    Wait for train
    FREDERICKSBURG LINE
    300 Union Station
  • 6
    Ride to train station
    Ride to train station
    Union Station
    8 min
  • 7
    Train - MARCMARC
    Wait for train
    MARC
    Baltimore
  • 8
    Ride to train station
    Ride to train station
    Baltimore Penn Station
    56 min
  • 9
    Walk to Johns Hopkins University
    Walk to
    Johns Hopkins University
    1.65 mi • 35 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Clarksville Park & Ride to Johns Hopkins University

The distance between Clarksville Park & Ride, Baltimore and Johns Hopkins University, Baltimore is approximately 78.51 mi, which can typically be travelled in 165 min. Moovit will show you the directions from Clarksville Park & Ride to Johns Hopkins University by bus, metro and train, so no matter how you choose to travel in Baltimore – you will always have plenty of easy options.

Bus, Metro And Train schedule from Clarksville Park & Ride to Johns Hopkins University

To check the bus, metro and train schedule from Clarksville Park & Ride to Johns Hopkins University using the Moovit app, first download and open the app on your smartphone. Enter your starting point (Clarksville Park & Ride) and destination (Johns Hopkins University), then select the desired date and time of travel. Moovit will show all available bus, metro and train routes, estimated travel times, and any required transfers. You can view detailed departure and arrival times for each bus, metro and train, as well as real-time updates for delays or changes. Use this information to plan your trip and stay up to date with the latest bus, metro and train schedules.

Related Routes

From Clarksville Park & Ride to Johns Hopkins University by bus and train

To get from Clarksville Park & Ride to Johns Hopkins University in Baltimore, you’ll need to take one bus line and 2 train lines: take the 335 bus from Clarksville Park & Ride station to Sw 7th St & Sw Independence Av station. Next, you’ll have to switch to the FREDERICKSBURG LINE train and finally take the MARC train from Union Station station to Baltimore Penn Station station. The total trip duration for this route is approximately 3 hr 5 min. The ride fare is $3.00. The bus, metro and train schedule from Clarksville Park & Ride may change. We recommend you check the updated bus, metro and train schedule to Johns Hopkins University on the Moovit app.

185min$3.00
Bus - 335335
Train - FREDERICKSBURG LINEFREDERICKSBURG LINE
Train - MARCMARC
Walk to Johns Hopkins University
Leaves from Clarksville Park & Ride

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Clarksville Park & Ride
  • 2
    Bus - 335335
    Wait for bus
    335
    335/1 Washington Dc
  • 3
    Ride to bus station
    Ride to bus station
    Sw 7th St & Sw Independence Av
    59 min
  • 4
    Walk to train station
    Walk to train station
    L'Enfant Plaza
    240 yd • 3 min
  • 5
    Train - FREDERICKSBURG LINEFREDERICKSBURG LINE
    Wait for train
    FREDERICKSBURG LINE
    300 Union Station
  • 6
    Ride to train station
    Ride to train station
    Union Station
    8 min
  • 7
    Train - MARCMARC
    Wait for train
    MARC
    Baltimore
  • 8
    Ride to train station
    Ride to train station
    Baltimore Penn Station
    56 min
  • 9
    Walk to Johns Hopkins University
    Walk to
    Johns Hopkins University
    1.65 mi • 35 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Clarksville Park & Ride to Johns Hopkins University?

    The fastest way takes 165 minutes, using Bus line 335, Metro line ORANGE, Train line NORTHEAST REGIONAL.

  • What is the alternative route to get from Clarksville Park & Ride to Johns Hopkins University?

    The alternative route takes 185 minutes, using Bus line 335, Train line FREDERICKSBURG LINE, Train line MARC.

  • Is there a direct bus between Clarksville Park & Ride and Johns Hopkins University?

    No, you’ll have to take one bus line, one metro line and one train line in total. The total travelling time is 2 hr 45 min.

  • Which bus line goes from Clarksville Park & Ride to Johns Hopkins University?

    The 335 bus line goes from 335/1 Washington Dc station near Clarksville Park & Ride in Howard County to Independence Ave & 1st St Se Wb station. From there you’ll have to take one metro line and one train line till Independence Ave & 1st St Se Wb station near Johns Hopkins University in Baltimore.

  • How long does it take to travel from Clarksville Park & Ride to Johns Hopkins University by bus, metro and train?

    The total travel time between Clarksville Park & Ride in Howard County and Johns Hopkins University in Baltimore by bus, metro and train is about 2 hr 45 min.

  • Where do I get on the bus near Clarksville Park & Ride to get to Johns Hopkins University?

    Get on the 335 bus from the 335/1 Washington Dc stop near Clarksville Park & Ride in Howard County.

  • Where do I get off the bus when travelling between Clarksville Park & Ride and Johns Hopkins University?

    Get off the bus at the Independence Ave & 1st St Se Wb station, which is closest to Johns Hopkins University in Baltimore.

  • How much is the total bus, metro and train fare from Clarksville Park & Ride to Johns Hopkins University?

    The ride from Clarksville Park & Ride to Johns Hopkins University costs $3.00.

Popular Routes