How to get from San Giuliano Milanese to Lecco by train?
San Giuliano Milanese to Lecco - Train Schedule
The S1 train from San Giuliano Milanese to Lecco runs from 06:13 to 00:13, with departures every 30 min. The trip takes about 1 hr 56 min, with regular service throughout the operating hours.
From San Giuliano Milanese to Lecco by train
To get from San Giuliano Milanese to Lecco in Milan and Lombardy, you’ll need to take 3 train lines: take the S1 train from San Giuliano Milanese station to Milan Rogoredo station. Next, you’ll have to switch to the RE11 train and finally take the RE8 train from Milan Central station to Lecco station. The total trip duration for this route is approximately 1 hr 56 min. The ride fare is €6.20. The train schedule from San Giuliano Milanese may change. We recommend you check the updated train schedule to Lecco on the Moovit app.
Step by Step
- 1Start from train stationSan Giuliano Milanese
- 2Wait for trainS1Milan Bovisa Polytechnic
- 3Ride to train stationMilan Rogoredo12 min
- 4Wait for trainRE11Milan Central
- 5Ride to train stationMilan Central14 min
- 6Wait for trainRE8Tirano
- 7Ride to train stationLeccoID 7639 min
- 8Walk toLecco660 m • 9 min
Public transit directions from San Giuliano Milanese to Lecco
Train schedule from San Giuliano Milanese to Lecco
Related Routes
- Bormio to Lecco
- Campodolcino to Lecco
- Hydro to Lecco
- Gargnano to Lecco
- Lavenone to Lecco
- Livigno to Lecco
- Madesimo to Lecco
- Grosio to Lecco
- Grosotto to Lecco
- Ponte Di Legno to Lecco
- Temù to Lecco
- Tremosine to Lecco
- Vestone to Lecco
- Sondalo to Lecco
- Valdidentro to Lecco
- Vione to Lecco
- Balerna to Lecco
- Bedano to Lecco
- Bellinzona to Lecco
- Camorino to Lecco
Questions & Answers
What is the fastest way to get from San Giuliano Milanese to Lecco?
The fastest way takes 116 minutes, using Train line S1, Train line RE11, Train line RE8.
Is there a direct train between San Giuliano Milanese and Lecco?
No, you’ll have to take 3 train lines in total. The total travelling time is 1 hr 56 min.
Which train line goes from San Giuliano Milanese to Lecco?
The S1 train line goes from Milan Rogoredo station near San Giuliano Milanese in San Giuliano Milanese to Milan Central station. From there you’ll have to take one train line till Milan Central station near Lecco in Milan and Lombardy.
How long does it take to travel from San Giuliano Milanese to Lecco by train?
The total travel time between San Giuliano Milanese in San Giuliano Milanese and Lecco in Milan and Lombardy by train is about 1 hr 56 min.
Where do I get on the train near San Giuliano Milanese to get to Lecco?
Get on the S1 train from the Milan Rogoredo station near San Giuliano Milanese in San Giuliano Milanese.
Where do I get off the train when travelling between San Giuliano Milanese and Lecco?
Get off the train at the Milan Central station, which is closest to Lecco in Milan and Lombardy.
How much is the train fare from San Giuliano Milanese to Lecco?
The ride from San Giuliano Milanese to Lecco costs €6.20.
Popular Routes
- Brescia to Milan Linate Airport "E. Forlanini" (Lin)
- Milan Linate Airport "E. Forlanini" (Lin) to Crema
- San Siro Stadium to Milan Linate Airport
- Lambrate Station to Gessate
- Milan Central to Novedrate
- Milan Malpensa Airport (Mxp) to San Babila
- Verbania to Laveno-Mombello
- Como to Olgiate Comasco
- Milan Malpensa Airport (Mxp) to Ispra
- Lambrate Station to Milan Linate Airport "E. Forlanini" (Lin)
- Milan Central to Cormano
- Molino Dorino to Fatebenefratelli
- Milan to Vittuone
- Busto Arsizio to Rho
- San Donato to Gaetano Pini Hospital
- Republic to Fatebenefratelli
- Gessate to Milan Linate Airport "E. Forlanini" (Lin)
- Famagosta to Niguarda CÃ Granda Hospital
- Treviglio to Milan Linate Airport "E. Forlanini" (Lin)
- Monza to Verano Brianza