How to get from Culpeper County to Lochearn by bus and train?

From Culpeper County to Lochearn by bus and train

To get from Culpeper County to Lochearn in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the CULPEPER EXPRESS bus from Culpeper Hospital station to Waters Place station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the 85 bus from North Ave station to Milford Mill Rd & Slade Ave Wb Ns station. The total trip duration for this route is approximately 5 hr 17 min.

317min
Bus - CULPEPER EXPRESSCULPEPER EXPRESS
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - 8585
Walk to Lochearn
Leaves from Culpeper Hospital

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Culpeper County
  • 2
    Bus - CULPEPER EXPRESSCULPEPER EXPRESS
    Wait for bus
    CULPEPER EXPRESS
  • 3
    Ride to bus station
    Ride to bus station
    Waters Place
    13 min
  • 4
    Walk to train station
    Walk to train station
    Culpeper Amtrak
    110 yd • 2 min
  • 5
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    New York
  • 6
    Ride to train station
    Ride to train station
    Baltimore Penn Station
    167 min
  • 7
    Walk to bus station
    Walk to bus station
    North Ave
    0.53 mi • 11 min
  • 8
    Bus - 8585
    Wait for bus
    85
    Milford Mill Metro
  • 9
    Ride to bus station
    Ride to bus station
    Milford Mill Rd & Slade Ave Wb Ns
    ID 14050
    43 min
  • 10
    Walk to Lochearn
    Walk to
    Lochearn
    1.67 mi • 35 min
*Duration based on 8am traffic

Alternative route from Culpeper County to Lochearn by bus and train via CULPEPER TROLLEY, NORTHEAST REGIONAL and 85

To get from Culpeper County to Lochearn in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the CULPEPER TROLLEY bus from Culpeper Hospital station to Culpeper Post Office station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the 85 bus from North Ave station to Milford Mill Rd & Slade Ave Wb Ns station. The total trip duration for this route is approximately 5 hr 18 min. The ride fare is $1.50.

318min$1.50
Bus - CULPEPER TROLLEYCULPEPER TROLLEY
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - 8585
Walk to Lochearn
Leaves from Culpeper Hospital

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Culpeper County
  • 2
    Bus - CULPEPER TROLLEYCULPEPER TROLLEY
    Wait for bus
    CULPEPER TROLLEY
    Southern Loop
  • 3
    Ride to bus station
    Ride to bus station
    Culpeper Post Office
    27 min
  • 4
    Walk to train station
    Walk to train station
    Culpeper Amtrak
    310 yd • 4 min
  • 5
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    New York
  • 6
    Ride to train station
    Ride to train station
    Baltimore Penn Station
    167 min
  • 7
    Walk to bus station
    Walk to bus station
    North Ave
    0.53 mi • 11 min
  • 8
    Bus - 8585
    Wait for bus
    85
    Milford Mill Metro
  • 9
    Ride to bus station
    Ride to bus station
    Milford Mill Rd & Slade Ave Wb Ns
    ID 14050
    43 min
  • 10
    Walk to Lochearn
    Walk to
    Lochearn
    1.67 mi • 35 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Culpeper County to Lochearn

The distance between Culpeper County, Washington, D.C. - Baltimore, MD and Lochearn, Washington, D.C. - Baltimore, MD is approximately 117.71 mi, which can typically be travelled in 317 min. Moovit will show you the directions from Culpeper County to Lochearn by bus and train, so no matter how you choose to travel in Washington, D.C. - Baltimore, MD – you will always have plenty of easy options.

Related Routes

Alternative route from Culpeper County to Lochearn by bus and train via CULPEPER TROLLEY, NORTHEAST REGIONAL and 85

To get from Culpeper County to Lochearn in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines and one train line: take the CULPEPER TROLLEY bus from Culpeper Hospital station to Culpeper Post Office station. Next, you’ll have to switch to the NORTHEAST REGIONAL train and finally take the 85 bus from North Ave station to Milford Mill Rd & Slade Ave Wb Ns station. The total trip duration for this route is approximately 5 hr 18 min. The ride fare is $1.50.

318min$1.50
Bus - CULPEPER TROLLEYCULPEPER TROLLEY
Train - NORTHEAST REGIONALNORTHEAST REGIONAL
Bus - 8585
Walk to Lochearn
Leaves from Culpeper Hospital

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Culpeper County
  • 2
    Bus - CULPEPER TROLLEYCULPEPER TROLLEY
    Wait for bus
    CULPEPER TROLLEY
    Southern Loop
  • 3
    Ride to bus station
    Ride to bus station
    Culpeper Post Office
    27 min
  • 4
    Walk to train station
    Walk to train station
    Culpeper Amtrak
    310 yd • 4 min
  • 5
    Train - NORTHEAST REGIONALNORTHEAST REGIONAL
    Wait for train
    NORTHEAST REGIONAL
    New York
  • 6
    Ride to train station
    Ride to train station
    Baltimore Penn Station
    167 min
  • 7
    Walk to bus station
    Walk to bus station
    North Ave
    0.53 mi • 11 min
  • 8
    Bus - 8585
    Wait for bus
    85
    Milford Mill Metro
  • 9
    Ride to bus station
    Ride to bus station
    Milford Mill Rd & Slade Ave Wb Ns
    ID 14050
    43 min
  • 10
    Walk to Lochearn
    Walk to
    Lochearn
    1.67 mi • 35 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Culpeper County to Lochearn?

    The fastest way takes 317 minutes, using Bus line CULPEPER EXPRESS, Train line NORTHEAST REGIONAL, Bus line 85.

  • What is the alternative route to get from Culpeper County to Lochearn?

    The alternative route takes 318 minutes, using Bus line CULPEPER TROLLEY, Train line NORTHEAST REGIONAL, Bus line 85.

  • Is there a direct bus between Culpeper County and Lochearn in Washington, D.C. - Baltimore, MD?

    No, you’ll have to take 2 bus lines and one train line in total. The total travelling time is 5 hr 17 min.

  • Which bus line goes from Culpeper County to Lochearn in Washington, D.C. - Baltimore, MD?

    The CULPEPER EXPRESS bus line goes from Waters Place station near Culpeper County to Culpeper Amtrak station. From there you’ll have to take one bus line and one train line till Culpeper Amtrak station near Lochearn in Washington, D.C. - Baltimore, MD.

  • How long does it take to travel from Culpeper County to Lochearn in Washington, D.C. - Baltimore, MD by bus and train?

    The total travel time between Culpeper County and Lochearn in Washington, D.C. - Baltimore, MD by bus and train is about 5 hr 17 min.

  • Where do I get on the bus near Culpeper County to get to Lochearn in Washington, D.C. - Baltimore, MD?

    Get on the CULPEPER EXPRESS bus from the Waters Place stop near Culpeper County in Washington, D.C. - Baltimore, MD.

  • Where do I get off the bus when travelling between Culpeper County and Lochearn in Washington, D.C. - Baltimore, MD?

    Get off the bus at the Culpeper Amtrak stop, which is closest to Lochearn in Washington, D.C. - Baltimore, MD.

Popular Routes