Skip to main content

How to get from San Borja Sur to Lurin by bus and metro?

From San Borja Sur to Lurin by bus and metro

To get from San Borja Sur to Lurin in Lima, you’ll need to take one metro line and 2 bus lines: take the LINEA 1 metro from San Borja Sur station to Jorge Chavez station. Next, you’ll have to switch to the 8611 bus and finally take the 3807 bus from Alipio Ponce station to Primer Puente Touring station. The total trip duration for this route is approximately 44 min.

44min
Metro - LINEA 1
Bus - 86118611
Bus - 38073807
Leaves from San Borja Sur

Step by Step

  • 1
    Start from metro station
    Start from metro station
    San Borja Sur
  • 2
    Metro - LINEA 1
    Wait for metro
    LINEA 1
    Bayóvar (San Juan De Lurigancho) - Separadora Industrial (Villa El Salvador)
  • 3
    Ride to metro station
    Ride to metro station
    Jorge Chavez
    8 min
  • 4
    Walk to bus station
    Walk to bus station
    Jorge Chávez
    40 m • 1 min
  • 5
    Bus - 86118611
    Wait for bus
    8611
    Parque Mora (Miraflores) - Olaya (Lurín)
  • 6
    Ride to bus station
    Ride to bus station
    Alipio Ponce
    11 min
  • 7
    Bus - 38073807
    Wait for bus
    3807
    Jicamarca (San Juan De Lurigancho) - Av. Industrial (Lurín)
  • 8
    Ride to bus station Primer Puente Touring
    Ride to bus station
    Primer Puente Touring
    16 min
*Duration based on 8am traffic

Alternative route from San Borja Sur to Lurin by bus and metro via LINEA 1, 8211 and 3807

To get from San Borja Sur to Lurin in Lima, you’ll need to take one metro line and 2 bus lines: take the LINEA 1 metro from San Borja Sur station to Atocongo station. Next, you’ll have to switch to the 8211 bus and finally take the 3807 bus from Tinoco station to Primer Puente Touring station. The total trip duration for this route is approximately 47 min.

47min
Metro - LINEA 1
Bus - 82118211
Bus - 38073807
Leaves from San Borja Sur

Step by Step

  • 1
    Start from metro station
    Start from metro station
    San Borja Sur
  • 2
    Metro - LINEA 1
    Wait for metro
    LINEA 1
    Bayóvar (San Juan De Lurigancho) - Separadora Industrial (Villa El Salvador)
  • 3
    Ride to metro station
    Ride to metro station
    Atocongo
    10 min
  • 4
    Walk to bus station
    Walk to bus station
    Atocongo
    60 m • 1 min
  • 5
    Bus - 82118211
    Wait for bus
    8211
    Jose Galvez (Pachacamac) - Chuquitanta (San Martin De Porres)
  • 6
    Ride to bus station
    Ride to bus station
    Tinoco
    2 min
  • 7
    Walk to bus station
    Walk to bus station
    Tinoco
    180 m • 3 min
  • 8
    Bus - 38073807
    Wait for bus
    3807
    Jicamarca (San Juan De Lurigancho) - Av. Industrial (Lurín)
  • 9
    Ride to bus station Primer Puente Touring
    Ride to bus station
    Primer Puente Touring
    25 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Lima.
All local mobility options in one app

Public transit directions from San Borja Sur to Lurin

The distance between San Borja Sur, Lima and Lurin, Lima is approximately 16.65 km, which can typically be travelled in 44 min. Moovit will show you the directions from San Borja Sur to Lurin by bus and metro, so no matter how you choose to travel in Lima – you will always have plenty of easy options.

Public transit stations close to San Borja Sur

San Borja Sur is located at San Borja Sur, Lima and the nearest public transit station is San Borja Sur.

Metro stations close to San Borja Sur:

  • Nicolas Arriola
  • Angamos
  • Estacion La Cultura

Bus stations close to San Borja Sur:

  • San Borja Sur
  • Isaac Albeniz
  • Fray Luis De León

Public transit stations close to Lurin, Lima

Lurin is located at Lurin, Lima and the nearest public transit station is Primer Puente Touring.

Metro stations close to Lurin:

  • Parque Industrial
  • Villa El Salvador

Bus stations close to Lurin:

  • Primer Puente Touring
  • Calle 1, 1688
  • Calle 1, 35

Alternative route from San Borja Sur to Lurin by bus and metro via LINEA 1, 8211 and 3807

To get from San Borja Sur to Lurin in Lima, you’ll need to take one metro line and 2 bus lines: take the LINEA 1 metro from San Borja Sur station to Atocongo station. Next, you’ll have to switch to the 8211 bus and finally take the 3807 bus from Tinoco station to Primer Puente Touring station. The total trip duration for this route is approximately 47 min.

47min
Metro - LINEA 1
Bus - 82118211
Bus - 38073807
Leaves from San Borja Sur

Step by Step

  • 1
    Start from metro station
    Start from metro station
    San Borja Sur
  • 2
    Metro - LINEA 1
    Wait for metro
    LINEA 1
    Bayóvar (San Juan De Lurigancho) - Separadora Industrial (Villa El Salvador)
  • 3
    Ride to metro station
    Ride to metro station
    Atocongo
    10 min
  • 4
    Walk to bus station
    Walk to bus station
    Atocongo
    60 m • 1 min
  • 5
    Bus - 82118211
    Wait for bus
    8211
    Jose Galvez (Pachacamac) - Chuquitanta (San Martin De Porres)
  • 6
    Ride to bus station
    Ride to bus station
    Tinoco
    2 min
  • 7
    Walk to bus station
    Walk to bus station
    Tinoco
    180 m • 3 min
  • 8
    Bus - 38073807
    Wait for bus
    3807
    Jicamarca (San Juan De Lurigancho) - Av. Industrial (Lurín)
  • 9
    Ride to bus station Primer Puente Touring
    Ride to bus station
    Primer Puente Touring
    25 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from San Borja Sur to Lurin?

    The fastest way takes 44 minutes, using Bus line LINEA 1, Bus line 8611, Bus line 3807.

  • What is the alternative route to get from San Borja Sur to Lurin?

    The alternative route takes 47 minutes, using Bus line LINEA 1, Bus line 8211, Bus line 3807.

  • Is there a direct metro between San Borja Sur and Lurin?

    No, you’ll have to take one metro line and 2 bus lines in total. The total travelling time is 44 min.

  • Which metro line goes from San Borja Sur to Lurin?

    The LINEA 1 metro line goes from Bayóvar (San Juan De Lurigancho) - Separadora Industrial (Villa El Salvador) station near San Borja Sur in San Borja to Jorge Chavez station. From there you’ll have to take 2 bus lines till Jorge Chavez station near Lurin in Lima.

  • How long does it take to travel from San Borja Sur to Lurin by metro and bus?

    The total travel time between San Borja Sur in San Borja and Lurin in Lima by metro and bus is about 44 min.

  • Where do I get on the metro near San Borja Sur to get to Lurin?

    Get on the LINEA 1 metro from the Bayóvar (San Juan De Lurigancho) - Separadora Industrial (Villa El Salvador) station near San Borja Sur in San Borja.

  • Where do I get off the metro when travelling between San Borja Sur and Lurin?

    Get off the metro at the Jorge Chavez stop, which is closest to Lurin in Lima.

Real-Time Arrivals, Schedules, Maps & More