Skip to main content

How to get from Bowling Green to Morningside by bus, metro and train?

From Bowling Green to Morningside by bus, metro and train

To get from Bowling Green to Morningside in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines, one train line and 2 metro lines: take the GREEN bus from Mcmullen Hwy & Milnor Ave station to Rose's station. Next, you’ll have to switch to the RED bus, then the CAPITOL LIMITED train, then the METRORAIL RED LINE metro and finally take the METRORAIL GREEN LINE metro from Gallery Place-Chinatown station to Branch Avenue station. The total trip duration for this route is approximately 5 hr 45 min.

345min
Bus - GREENGREEN
Bus - REDRED
Train - CAPITOL LIMITEDCAPITOL LIMITED
Metro - METRORAIL RED LINE
Metro - METRORAIL GREEN LINE
Walk to Morningside
Leaves from Mcmullen Hwy & Milnor Ave

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Bowling Green
  • 2
    Bus - GREENGREEN
    Wait for bus
    GREEN
    Lavale / Cresaptown Loop
  • 3
    Ride to bus station
    Ride to bus station
    Rose's
    15 min
  • 4
    Bus - REDRED
    Wait for bus
    RED
    Willowbrook Rd Loop
  • 5
    Ride to bus station
    Ride to bus station
    Cumberland Post Office
    2 min
  • 6
    Walk to train station
    Walk to train station
    Cumberland Amtrak Station
    150 yd • 2 min
  • 7
    Train - CAPITOL LIMITEDCAPITOL LIMITED
    Wait for train
    CAPITOL LIMITED
    Washington Union Station
  • 8
    Ride to train station
    Ride to train station
    Union Station
    213 min
  • 9
    Walk to metro station
    Walk to metro station
    Union Station
    10 yd • 1 min
  • 10
    Metro - METRORAIL RED LINE
    Wait for metro
    METRORAIL RED LINE
    Twinbrook
  • 11
    Ride to metro station
    Ride to metro station
    Gallery Place-Chinatown
    4 min
  • 12
    Metro - METRORAIL GREEN LINE
    Wait for metro
    METRORAIL GREEN LINE
    Branch Ave
  • 13
    Ride to metro station
    Ride to metro station
    Branch Avenue
    25 min
  • 14
    Walk to Morningside
    Walk to
    Morningside
    1.71 mi • 36 min
*Duration based on 8am traffic

Alternative route from Bowling Green to Morningside by bus, metro and train via GREEN, BLUE, CAPITOL LIMITED, METRORAIL RED LINE and METRORAIL GREEN LINE

To get from Bowling Green to Morningside in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines, one train line and 2 metro lines: take the GREEN bus from Mcmullen Hwy & Milnor Ave station to Rose's station. Next, you’ll have to switch to the BLUE bus, then the CAPITOL LIMITED train, then the METRORAIL RED LINE metro and finally take the METRORAIL GREEN LINE metro from Gallery Place-Chinatown station to Branch Avenue station. The total trip duration for this route is approximately 5 hr 45 min.

345min
Bus - GREENGREEN
Bus - BLUEBLUE
Train - CAPITOL LIMITEDCAPITOL LIMITED
Metro - METRORAIL RED LINE
Metro - METRORAIL GREEN LINE
Walk to Morningside
Leaves from Mcmullen Hwy & Milnor Ave

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Bowling Green
  • 2
    Bus - GREENGREEN
    Wait for bus
    GREEN
    Lavale / Cresaptown Loop
  • 3
    Ride to bus station
    Ride to bus station
    Rose's
    15 min
  • 4
    Bus - BLUEBLUE
    Wait for bus
    BLUE
    White Oaks Loop
  • 5
    Ride to bus station
    Ride to bus station
    Cumberland Post Office
    2 min
  • 6
    Walk to train station
    Walk to train station
    Cumberland Amtrak Station
    150 yd • 2 min
  • 7
    Train - CAPITOL LIMITEDCAPITOL LIMITED
    Wait for train
    CAPITOL LIMITED
    Washington Union Station
  • 8
    Ride to train station
    Ride to train station
    Union Station
    213 min
  • 9
    Walk to metro station
    Walk to metro station
    Union Station
    10 yd • 1 min
  • 10
    Metro - METRORAIL RED LINE
    Wait for metro
    METRORAIL RED LINE
    Twinbrook
  • 11
    Ride to metro station
    Ride to metro station
    Gallery Place-Chinatown
    4 min
  • 12
    Metro - METRORAIL GREEN LINE
    Wait for metro
    METRORAIL GREEN LINE
    Branch Ave
  • 13
    Ride to metro station
    Ride to metro station
    Branch Avenue
    25 min
  • 14
    Walk to Morningside
    Walk to
    Morningside
    1.71 mi • 36 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Washington, D.C. - Baltimore, MD.
All local mobility options in one app

Public transit directions from Bowling Green to Morningside

The distance between Bowling Green, Washington, D.C. - Baltimore, MD and Morningside, Washington, D.C. - Baltimore, MD is approximately 152.54 mi, which can typically be travelled in 345 min. Moovit will show you the directions from Bowling Green to Morningside by bus, metro and train, so no matter how you choose to travel in Washington, D.C. - Baltimore, MD – you will always have plenty of easy options.

Public transit stations close to Bowling Green

Bowling Green is located at Bowling Green, Washington, D.C. - Baltimore, MD and the nearest public transit station is Goodwill Industries.

Bus stations close to Bowling Green:

  • Goodwill Industries
  • Bowling Greene Fire Department

Public transit stations close to Morningside, Washington, D.C. - Baltimore, MD

Morningside is located at Morningside, Washington, D.C. - Baltimore, MD and the nearest public transit station is Allentown Rd + Aafb.

Metro stations close to Morningside:

  • Branch Avenue
  • Suitland Metro Station

Bus stations close to Morningside:

  • Allentown Rd + Aafb
  • Allentown Rd + Command Dr
  • Allentown Rd + Maxwell Dr

Alternative route from Bowling Green to Morningside by bus, metro and train via GREEN, BLUE, CAPITOL LIMITED, METRORAIL RED LINE and METRORAIL GREEN LINE

To get from Bowling Green to Morningside in Washington, D.C. - Baltimore, MD, you’ll need to take 2 bus lines, one train line and 2 metro lines: take the GREEN bus from Mcmullen Hwy & Milnor Ave station to Rose's station. Next, you’ll have to switch to the BLUE bus, then the CAPITOL LIMITED train, then the METRORAIL RED LINE metro and finally take the METRORAIL GREEN LINE metro from Gallery Place-Chinatown station to Branch Avenue station. The total trip duration for this route is approximately 5 hr 45 min.

345min
Bus - GREENGREEN
Bus - BLUEBLUE
Train - CAPITOL LIMITEDCAPITOL LIMITED
Metro - METRORAIL RED LINE
Metro - METRORAIL GREEN LINE
Walk to Morningside
Leaves from Mcmullen Hwy & Milnor Ave

Step by Step

  • 1
    Start from bus station
    Start from bus station
    Bowling Green
  • 2
    Bus - GREENGREEN
    Wait for bus
    GREEN
    Lavale / Cresaptown Loop
  • 3
    Ride to bus station
    Ride to bus station
    Rose's
    15 min
  • 4
    Bus - BLUEBLUE
    Wait for bus
    BLUE
    White Oaks Loop
  • 5
    Ride to bus station
    Ride to bus station
    Cumberland Post Office
    2 min
  • 6
    Walk to train station
    Walk to train station
    Cumberland Amtrak Station
    150 yd • 2 min
  • 7
    Train - CAPITOL LIMITEDCAPITOL LIMITED
    Wait for train
    CAPITOL LIMITED
    Washington Union Station
  • 8
    Ride to train station
    Ride to train station
    Union Station
    213 min
  • 9
    Walk to metro station
    Walk to metro station
    Union Station
    10 yd • 1 min
  • 10
    Metro - METRORAIL RED LINE
    Wait for metro
    METRORAIL RED LINE
    Twinbrook
  • 11
    Ride to metro station
    Ride to metro station
    Gallery Place-Chinatown
    4 min
  • 12
    Metro - METRORAIL GREEN LINE
    Wait for metro
    METRORAIL GREEN LINE
    Branch Ave
  • 13
    Ride to metro station
    Ride to metro station
    Branch Avenue
    25 min
  • 14
    Walk to Morningside
    Walk to
    Morningside
    1.71 mi • 36 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Bowling Green to Morningside?

    The fastest way takes 345 minutes, using Bus line GREEN, Bus line RED, Bus line CAPITOL LIMITED, Bus line METRORAIL RED LINE, Bus line METRORAIL GREEN LINE.

  • What is the alternative route to get from Bowling Green to Morningside?

    The alternative route takes 345 minutes, using Bus line GREEN, Bus line BLUE, Bus line CAPITOL LIMITED, Bus line METRORAIL RED LINE, Bus line METRORAIL GREEN LINE.

  • Is there a direct bus between Bowling Green and Morningside in Washington, D.C. - Baltimore, MD?

    No, you’ll have to take 2 bus lines, one train line and 2 metro lines in total. The total travelling time is 5 hr 45 min.

  • Which bus line goes from Bowling Green to Morningside in Washington, D.C. - Baltimore, MD?

    The GREEN bus line goes from Lavale / Cresaptown Loop station near Bowling Green to Rose's station. From there you’ll have to take one bus line, one train line and 2 metro lines till Rose's station near Morningside in Washington, D.C. - Baltimore, MD

  • How long does it take to travel from Bowling Green to Morningside in Washington, D.C. - Baltimore, MD by bus, train and metro?

    The total travel time between Bowling Green and Morningside in Washington, D.C. - Baltimore, MD by bus, train and metro is about 5 hr 45 min.

  • Where do I get on the bus near Bowling Green to get to Morningside in Washington, D.C. - Baltimore, MD?

    Get on the GREEN bus from the Lavale / Cresaptown Loop stop near Bowling Green in Washington, D.C. - Baltimore, MD.

  • Where do I get off the bus when travelling between Bowling Green and Morningside in Washington, D.C. - Baltimore, MD?

    Get off the bus at the Rose's station, which is closest to Morningside in Washington, D.C. - Baltimore, MD.