The Most Popular Urban Mobility App in Pittsburgh.
All local mobility options in one app
How to get from Washington Junction to North Side by bus and light rail?
By bus and light rail
To get from Washington Junction to North Side in Pittsburgh, take the SLVR light rail from Washington Junction station to Wood Street station. Next, take the 11 bus from Liberty Ave + 7th St (Clark Bldg) station to Federal St + Hemlock St station. The total trip duration for this route is approximately 42 min. The ride fare is $2.75.
42min$2.75
SLVR11Leaves from Washington Junction
Step by Step
- 1
Start from light rail stationWashington Junction - 2SLVRWait for light railSLVRInbound-North Shore
- 3
Ride to light rail stationWood Street30 min - 4
Walk to bus stationLiberty Ave + 7th St (Clark Bldg)ID 18030 yd • 1 min - 511Wait for bus11Outbound-Downtown
- 6Ride to bus stationFederal St + Hemlock StID 195778 min
*Duration based on 8am traffic
Alternative route by bus and light rail via BLUE and 11
To get from Washington Junction to North Side in Pittsburgh, take the BLUE light rail from Washington Junction station to Wood Street station. Next, take the 11 bus from Liberty Ave + 7th St (Clark Bldg) station to Federal St + Hemlock St station. The total trip duration for this route is approximately 47 min. The ride fare is $2.75.
47min$2.75
BLUE11Leaves from Washington Junction
Step by Step
- 1Start from light rail stationWashington Junction
- 2BLUEWait for light railBLUEInbound-North Shore
- 3Ride to light rail stationWood Street30 min
- 4Walk to bus stationLiberty Ave + 7th St (Clark Bldg)ID 18030 yd • 1 min
- 511Wait for bus11Outbound-Downtown
- 6Ride to bus stationFederal St + Hemlock StID 195778 min
*Duration based on 8am traffic
Public transit directions from Washington Junction to North Side
The distance between Washington Junction, Pittsburgh and North Side, Pittsburgh is approximately 9.42 mi, which can typically be travelled in 42 min. Moovit will show you the directions from Washington Junction to North Side by bus and light rail, so no matter how you choose to travel in Pittsburgh – you will always have plenty of easy options.
Public transit stations close to Washington Junction
Washington Junction is located at Washington Junction, Pittsburgh and the nearest public transit station is Castle Shannon: Route 88 Opposite Milfor.
Bus stations close to Washington Junction:
- Castle Shannon: Route 88 Opposite Milfor
- Castle Shannon: Route 88 After Conner
- Route 88 + Connor Rd
Public transit stations close to North Side, Pittsburgh
North Side is located at North Side, Pittsburgh and the nearest public transit station is Federal St + Sampsonia.
Train stations close to North Side:
- Pittsburgh Amtrak Station
Bus stations close to North Side:
- Federal St + Sampsonia
- Federal St + Hemlock St
- Federal St + North Ave FS
Related Routes
- 10th St And Penn Ave to North Side
- Pittsburgh Intermodal Station to North Side
- Gateway Center to North Side
- Wood Street to North Side
- Steel Plaza to North Side
- Station Square to North Side
- South Hills Junction to North Side
- Fallowfield to North Side
- Hampshire to North Side
- Shiras to North Side
- Dormont Junction to North Side
- Mt. Lebanon to North Side
- Castle Shannon to North Side
- Overbrook Junction to North Side
- Bethel Village to North Side
- South Hills Village to North Side
- Beagle to North Side
- West Library to North Side
- South Bank to North Side
- Pittsburgh (Airport) to North Side
Alternative route by bus and light rail via BLUE and 11
To get from Washington Junction to North Side in Pittsburgh, take the BLUE light rail from Washington Junction station to Wood Street station. Next, take the 11 bus from Liberty Ave + 7th St (Clark Bldg) station to Federal St + Hemlock St station. The total trip duration for this route is approximately 47 min. The ride fare is $2.75.
47min$2.75
BLUE11Leaves from Washington Junction
Step by Step
- 1Start from light rail stationWashington Junction
- 2BLUEWait for light railBLUEInbound-North Shore
- 3Ride to light rail stationWood Street30 min
- 4Walk to bus stationLiberty Ave + 7th St (Clark Bldg)ID 18030 yd • 1 min
- 511Wait for bus11Outbound-Downtown
- 6Ride to bus stationFederal St + Hemlock StID 195778 min
*Duration based on 8am traffic
Questions & Answers
What is the fastest way to get from Washington Junction to North Side?
The fastest way takes 42 minutes, using Bus line SLVR, Bus line 11.
What is the alternative route to get from Washington Junction to North Side?
The alternative route takes 47 minutes, using Bus line BLUE, Bus line 11.
Is there a direct light rail between Washington Junction and North Side?
No, you’ll have to take one light rail line and one bus line in total. The total travelling time is 42 min.
Which light rail line goes from Washington Junction to North Side?
The SLVR light rail line goes from Inbound-North Shore station near Washington Junction in Bethel Park to Wood Street station. From there you’ll have to take one bus line till Wood Street station near North Side in Pittsburgh.
How long does it take to travel from Washington Junction to North Side by light rail and bus?
The total travel time between Washington Junction in Bethel Park and North Side in Pittsburgh by light rail and bus is about 42 min.
Where do I get on the light rail near Washington Junction to get to North Side?
Get on the SLVR light rail from the Inbound-North Shore station near Washington Junction in Bethel Park.
Where do I get off the light rail when travelling between Washington Junction and North Side?
Get off the light rail at the Wood Street stop, which is closest to North Side in Pittsburgh.
How much is the light rail fare from Washington Junction to North Side?
The ride from Washington Junction to North Side costs $2.75.
