How to get from San Giuliano Milanese to Renate by train?
San Giuliano Milanese to Renate - Train Schedule
The S1 train from San Giuliano Milanese to Renate runs from 06:13 to 00:13, with departures every 30 min. The trip takes about 3 hr 26 min, with regular service throughout the operating hours.
From San Giuliano Milanese to Renate by train
To get from San Giuliano Milanese to Renate in Milan and Lombardy, you’ll need to take 3 train lines: take the S1 train from San Giuliano Milanese station to Milan Porta Garibaldi (Passante) station. Next, you’ll have to switch to the S8 train and finally take the S7 train from Lecco station to Renate-Veduggio station. The total trip duration for this route is approximately 3 hr 26 min. The ride fare is €7.40. The train schedule from San Giuliano Milanese may change. We recommend you check the updated train schedule to Renate on the Moovit app.
Step by Step
- 1Walk to train stationSan Giuliano Milanese1.93 km • 25 min
- 2Wait for trainS1Milan Bovisa Polytechnic
- 3Ride to train stationMilan Porta Garibaldi (Passante)31 min
- 4Walk to train stationMilano Porta Garibaldi100 m • 2 min
- 5Wait for trainS8Lecco
- 6Ride to train stationLeccoID 7662 min
- 7Wait for trainS7Triuggio-Ponte Albiate
- 8Ride to train stationRenate-Veduggio35 min
Public transit directions from San Giuliano Milanese to Renate
Train schedule from San Giuliano Milanese to Renate
Related Routes
- Bagolino to Renate
- Anfo to Renate
- Bormio to Renate
- Campodolcino to Renate
- Collio to Renate
- Hydro to Renate
- Gargnano to Renate
- Lavenone to Renate
- Limone Sul Garda to Renate
- Livigno to Renate
- Madesimo to Renate
- Grosio to Renate
- Grosotto to Renate
- Ponte Di Legno to Renate
- Pezzaze to Renate
- Temù to Renate
- Tremosine to Renate
- Vestone to Renate
- Sondalo to Renate
- Storo to Renate
Questions & Answers
What is the fastest way to get from San Giuliano Milanese to Renate?
The fastest way takes 206 minutes, using Train line S1, Train line S8, Train line S7.
Is there a direct train between San Giuliano Milanese and Renate in Milan and Lombardy?
No, you’ll have to take 3 train lines in total. The total travelling time is 3 hr 26 min.
Which train line goes from San Giuliano Milanese to Renate in Milan and Lombardy?
The S1 train line goes from San Giuliano Milanese station near San Giuliano Milanese to Milan Porta Garibaldi (Passante) station. From there you’ll have to take one train line till Milan Porta Garibaldi (Passante) station near Renate in Milan and Lombardy.
How long does it take to travel from San Giuliano Milanese to Renate in Milan and Lombardy by train?
The total travel time between San Giuliano Milanese and Renate in Milan and Lombardy by train is about 3 hr 26 min.
Where do I get on the train near San Giuliano Milanese to get to Renate in Milan and Lombardy?
Get on the S1 train from the San Giuliano Milanese station near San Giuliano Milanese in Milan and Lombardy.
Where do I get off the train when travelling between San Giuliano Milanese and Renate in Milan and Lombardy?
Get off the train at the Milan Porta Garibaldi (Passante) station, which is closest to Renate in Milan and Lombardy.
How much is the train fare from San Giuliano Milanese to Renate?
The ride from San Giuliano Milanese to Renate costs €7.40.
Popular Routes
- San Donato to Sesto San Giovanni
- Pavia to Orio Al Serio
- Como Lago to Laglio
- Arcore to Concorezzo
- Rho Fair to Novara
- Sesto 1st May FS to Saronno
- Bergamo to Castione Della Presolana
- Milan Rogoredo to Comasina
- Bergamo to San Giovanni Bianco Civil Hospital
- Crocetta Metro Line 3 to Bocconi University
- Baveno to Domodossola
- Dateo M4 to Bocconi University
- Malpensa Airport T1 to Pero
- Rho to Niguarda CÃ Granda Hospital
- Milan Porta Venezia to Milan Linate Airport "E. Forlanini" (Lin)
- Lampugnano to Bergamo
- Cologno Monzese to Sesto San Giovanni
- Gallarate to Milan Malpensa Terminal 1
- Molino Dorino to Milan Polyclinic
- Lodi to San Siro Stadium