How to get from Bellinzona to Segrate by metro and train?

From Bellinzona to Segrate by metro and train

To get from Bellinzona to Segrate in Milan and Lombardy, you’ll need to take 2 train lines and one metro line: take the S20 train from Bellinzona station to San Antonino station. Next, you’ll have to switch to the RE80 train and finally take the M2 metro from Centrale FS station to Cascina Gobba station. The total trip duration for this route is approximately 2 hr 45 min.

165min
Train - S20
Train - RE80
Metro - M2
Walk to Segrate
Leaves from Bellinzona

Step by Step

  • 1
    Start from train station
    Start from train station
    Bellinzona
  • 2
    Train - S20
    Wait for train
    S20
    Locarno
  • 3
    Ride to train station
    Ride to train station
    San Antonino
    7 min
  • 4
    Train - RE80
    Wait for train
    RE80
    Milano Centrale
  • 5
    Ride to train station
    Ride to train station
    Milano Centrale
    96 min
  • 6
    Walk to metro station
    Walk to metro station
    Centrale FS
    30 m • 1 min
  • 7
    Metro - M2
    Wait for metro
    M2
    Gessate
  • 8
    Ride to metro station
    Ride to metro station
    Cascina Gobba
    13 min
  • 9
    Walk to Segrate
    Walk to
    Segrate
    1.9 km • 25 min
*Duration based on 8am traffic

Alternative route from Bellinzona to Segrate by metro and train via S10, RE80 and M2

To get from Bellinzona to Segrate in Milan and Lombardy, you’ll need to take 2 train lines and one metro line: take the S10 train from Bellinzona station to Lugano station. Next, you’ll have to switch to the RE80 train and finally take the M2 metro from Centrale FS station to Cascina Gobba station. The total trip duration for this route is approximately 2 hr 52 min.

172min
Train - S10
Train - RE80
Metro - M2
Walk to Segrate
Leaves from Bellinzona

Step by Step

  • 1
    Start from train station
    Start from train station
    Bellinzona
  • 2
    Train - S10
    Wait for train
    S10
    Chiasso
  • 3
    Ride to train station
    Ride to train station
    Lugano
    34 min
  • 4
    Train - RE80
    Wait for train
    RE80
    Milano Centrale
  • 5
    Ride to train station
    Ride to train station
    Milano Centrale
    75 min
  • 6
    Walk to metro station
    Walk to metro station
    Centrale FS
    30 m • 1 min
  • 7
    Metro - M2
    Wait for metro
    M2
    Gessate
  • 8
    Ride to metro station
    Ride to metro station
    Cascina Gobba
    13 min
  • 9
    Walk to Segrate
    Walk to
    Segrate
    1.9 km • 25 min
*Duration based on 8am traffic
The Most Popular Urban Mobility App in Milan and Lombardy.
All local mobility options in one app

Public transit directions from Bellinzona to Segrate

The distance between Bellinzona, Milan and Lombardy and Segrate, Milan and Lombardy is approximately 110.37 km, which can typically be travelled in 165 min. Moovit will show you the directions from Bellinzona to Segrate by metro and train, so no matter how you choose to travel in Milan and Lombardy – you will always have plenty of easy options.

Public transit stations close to Bellinzona

Bellinzona is located at Bellinzona, Milan and Lombardy and the nearest public transit station is Bellinzona, Stazione.

Train stations close to Bellinzona:

  • Giubiasco

Bus stations close to Bellinzona:

  • Bellinzona, Stazione
  • Daro, Scuole
  • Daro, Via Malmera

Public transit stations close to Segrate, Milan and Lombardy

Segrate is located at Segrate, Milan and Lombardy and the nearest public transit station is Portineria Milano 2 (Segrate).

Metro stations close to Segrate:

  • Crescenzago
  • Vimodrone
  • Cologno Sud

Bus stations close to Segrate:

  • Portineria Milano 2 (Segrate)
  • Res. Archi Milano 2 (Segrate)
  • Portieria Milano 2 (Segrate)

Related Routes

Alternative route from Bellinzona to Segrate by metro and train via S10, RE80 and M2

To get from Bellinzona to Segrate in Milan and Lombardy, you’ll need to take 2 train lines and one metro line: take the S10 train from Bellinzona station to Lugano station. Next, you’ll have to switch to the RE80 train and finally take the M2 metro from Centrale FS station to Cascina Gobba station. The total trip duration for this route is approximately 2 hr 52 min.

172min
Train - S10
Train - RE80
Metro - M2
Walk to Segrate
Leaves from Bellinzona

Step by Step

  • 1
    Start from train station
    Start from train station
    Bellinzona
  • 2
    Train - S10
    Wait for train
    S10
    Chiasso
  • 3
    Ride to train station
    Ride to train station
    Lugano
    34 min
  • 4
    Train - RE80
    Wait for train
    RE80
    Milano Centrale
  • 5
    Ride to train station
    Ride to train station
    Milano Centrale
    75 min
  • 6
    Walk to metro station
    Walk to metro station
    Centrale FS
    30 m • 1 min
  • 7
    Metro - M2
    Wait for metro
    M2
    Gessate
  • 8
    Ride to metro station
    Ride to metro station
    Cascina Gobba
    13 min
  • 9
    Walk to Segrate
    Walk to
    Segrate
    1.9 km • 25 min
*Duration based on 8am traffic

Questions & Answers

  • What is the fastest way to get from Bellinzona to Segrate?

    The fastest way takes 165 minutes, using Train line S20, Train line RE80, Metro line M2.

  • What is the alternative route to get from Bellinzona to Segrate?

    The alternative route takes 172 minutes, using Train line S10, Train line RE80, Metro line M2.

  • Is there a direct train between Bellinzona and Segrate in Milan and Lombardy?

    No, you’ll have to take 2 train lines and one metro line in total. The total travelling time is 2 hr 45 min.

  • Which train line goes from Bellinzona to Segrate in Milan and Lombardy?

    The S20 train line goes from Locarno station near Bellinzona to San Antonino station. From there you’ll have to take one train line and one metro line till San Antonino station near Segrate in Milan and Lombardy

  • How long does it take to travel from Bellinzona to Segrate in Milan and Lombardy by train and metro?

    The total travel time between Bellinzona and Segrate in Milan and Lombardy by train and metro is about 2 hr 45 min.

  • Where do I get on the train near Bellinzona to get to Segrate in Milan and Lombardy?

    Get on the S20 train from the Locarno station near Bellinzona in Milan and Lombardy.

  • Where do I get off the train when travelling between Bellinzona and Segrate in Milan and Lombardy?

    Get off the train at the San Antonino station, which is closest to Segrate in Milan and Lombardy.

Popular Routes