How to get from Castelveccana to Senago by bus and train?
Castelveccana to Senago - Train Schedule
The S30 train from Castelveccana to Senago runs from 06:59 to 17:54, with departures every 1 hr-8 hr. The trip takes about 3 hr 21 min, with regular service throughout the operating hours.
From Castelveccana to Senago by bus and train
To get from Castelveccana to Senago in Milan and Lombardy, you’ll need to take 2 train lines and one bus line: take the S30 train from Caldè station to Gallarate station. Next, you’ll have to switch to the RE51 train and finally take the Z111 bus from Saronno - Cantore Street (FNM Station - Orsoline/Prealpi Institute) station to Senago - Mazzini Street 4 station. The total trip duration for this route is approximately 3 hr 21 min. The bus and train schedule from Castelveccana may change. We recommend you check the updated bus and train schedule to Senago on the Moovit app.
Step by Step
- 1Start from train stationCastelveccana
- 2Wait for trainS30Gallarate
- 3Ride to train stationGallarate41 min
- 4Wait for trainRE51Milano Centrale
- 5Ride to train stationSaronno41 min
- 6Wait for busZ111Limbiate Via Marconi Stop 3
- 7Ride to bus stationSenago - Mazzini Street 4ID SEN_2435 min
- 8Walk toSenago770 m • 10 min
Public transit directions from Castelveccana to Senago
Bus And Train schedule from Castelveccana to Senago
Related Routes
- Campodolcino to Senago
- Collio to Senago
- Hydro to Senago
- Gargnano to Senago
- Lavenone to Senago
- Limone Sul Garda to Senago
- Livigno to Senago
- Madesimo to Senago
- Grosio to Senago
- Grosotto to Senago
- Ponte Di Legno to Senago
- Temù to Senago
- Tremosine to Senago
- Vestone to Senago
- Sondalo to Senago
- Valdidentro to Senago
- Vione to Senago
- Balerna to Senago
- Bedano to Senago
- Bellinzona to Senago
Questions & Answers
What is the fastest way to get from Castelveccana to Senago?
The fastest way takes 201 minutes, using train line S30, train line RE51, bus line Z111.
Is there a direct train between Castelveccana and Senago in Milan and Lombardy?
No, you’ll have to take 2 train lines and one bus line in total. The total traveling time is 3 hr 21 min.
Which train line goes from Castelveccana to Senago in Milan and Lombardy?
The S30 train line goes from Gallarate station near Castelveccana to Saronno station. From there you’ll have to take one train line and one bus line till Saronno station near Senago in Milan and Lombardy.
How long does it take to travel from Castelveccana to Senago in Milan and Lombardy by train and bus?
The total travel time between Castelveccana and Senago in Milan and Lombardy by train and bus is about 3 hr 21 min.
Where do I get on the train near Castelveccana to get to Senago in Milan and Lombardy?
Get on the S30 train from the Gallarate station near Castelveccana in Milan and Lombardy.
Where do I get off the train when traveling between Castelveccana and Senago in Milan and Lombardy?
Get off the train at the Saronno stop, which is closest to Senago in Milan and Lombardy.
Popular Routes
- Cadorna FN to Sesto San Giovanni
- Monza to Vimercate
- Monza to Gorgonzola
- Lampugnano to Sesto San Giovanni
- Bergamo to Vimercate
- Malpensa Airport T1 to Erba
- Pavia Railway Station (Station 2) to Landriano
- Cologno Nord to San Raffaele Hospital
- Affori Center to Milan Linate Airport
- Cadorna FN to Humanitas
- Lampugnano to Gaetano Pini Hospital
- Milan Linate Airport "E. Forlanini" (Lin) to Pavia
- Bergamo to Selvino
- Malpensa Airport T1 to Tradate
- Milano Porta Garibaldi to Policlinic Hospital
- Sesto 1st May FS M1 to Multimedica
- Pavia to Torre D' Isola
- Monza to Milan Malpensa Terminal 1
- Milan Cadorna to Fino Mornasco
- Milano Centrale to Auxologic Institute Piancavallo